Structural Engineering and Mechanics

  • 제53권4호
  • /
  • Pages.833-845
  • /
  • 2015
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A teaching learning based optimization for truss structures with frequency constraints

  • Dede, Tayfun (Department of Civil Engineering, Karadeniz Technical University) ;
  • Togan, Vedat (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2014.05.26
  • 심사 : 2015.01.13
  • 발행 : 2015.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Natural frequencies of the structural systems should be far away from the excitation frequency in order to avoid or reduce the destructive effects of dynamic loads on structures. To accomplish this goal, a structural optimization on size and shape has been performed considering frequency constraints. Such an optimization problem has highly nonlinear property. Thus, the quality of the solution is not independent of the optimization technique to be applied. This study presents the performance evaluation of the recently proposed meta-heuristic algorithm called Teaching Learning Based Optimization (TLBO) as an optimization engine in the weight optimization of the truss structures under frequency constraints. Some examples regarding the optimization of trusses on shape and size with frequency constraints are solved. Also, the results obtained are tabulated for comparison. The results demonstrated that the performance of the TLBO is satisfactory. Additionally, TLBO is better than other methods in some cases.

키워드

참고문헌

  1. Camp, C.V., Bichon, B.J. and Stovall, S.P. (2005), "Design of steel frames using ant colony optimization", J. Struct. Eng., ASCE, 131(3), 369-379. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:3(369)
  2. Dede, T. (2013), "Optimum design of grillage structures to LRFD-AISC with teaching-learning based optimization", Struct. Multidis. Opt., 48(5), 955-964. https://doi.org/10.1007/s00158-013-0936-3
  3. Dede, T. and Ayvaz, Y. (2013), "Structural optimization with teaching-learning based optimization algorithm", Struct. Eng. Mech., 47(4), 495-511. https://doi.org/10.12989/sem.2013.47.4.495
  4. Gandomi, A.H., Talatahari, S., Yang, X.S. and Deb, S. (2012), "Design optimization of truss structures using cuckoo search algorithm", Struct. Des. Tall Spec. Build., 22(17), 1330-1349. https://doi.org/10.1002/tal.1033
  5. Gholizadeh, S., Salajegheh, E. and Torkzadeh, P. (2008), "Structural optimization with frequency constraints by genetic algorithm using wavelet radial basis function neural network", J. Sound. Vib., 312, 316-331. https://doi.org/10.1016/j.jsv.2007.10.050
  6. Gomes, H.M (2011), "Truss optimization with dynamic constraints using a particle swarm algorithm", Expert. Syst. Appl., 38, 957-968. https://doi.org/10.1016/j.eswa.2010.07.086
  7. Grandhi, R.V. (1993), "Structural optimization with frequency constraints-A review", AIAA J., 31, 2296-2303. https://doi.org/10.2514/3.11928
  8. Hasancebi, O. (2008), "Adaptive evolution strategies in structural optimization: enhancing their computational performance with applications to large-scale structures", Comput. Struct., 87, 119-132.
  9. Hosseinpour, H., Niknam, T. and Taheri, S.I. (2011), "A modified TLBO algorithm for placement of AVRs considering DGs", Proceedings of 26th International Power System Conference, Tehran, Iran, October-November.
  10. Kaveh, A. and Mahdavi, V.R. (2013), "Optimal design of structures with multiple natural frequency constraints using a hybridized BB-BC/Quasi-Newton algorithm", Asian J. Civil Eng., Build. Hous., 57, 27-38.
  11. Kaveh, A. and Talatahari, S. (2010), "Optimum design of skeletal structures using imperialist competitive algorithm", Comput. Struct., 88, 220-1229.
  12. Kaveh, A. and Zolghadr, A. (2011), "Shape and size optimization of truss structures with frequency constraints using enhanced charged system search algorithm", Asian J. Civil Eng., Build. Hous., 12, 487-509.
  13. Lamberti, L. (2008), "An efficient simulated annealing algorithm for design optimization of truss structures", Comput. Struct., 86, 1936-1953. https://doi.org/10.1016/j.compstruc.2008.02.004
  14. Li, L.J., Huang, Z.B. and Liu, F. (2009), "A heuristic particle swarm optimization method for truss structures with discrete variables", Comput. Struct., 87, 435-443. https://doi.org/10.1016/j.compstruc.2009.01.004
  15. Lingyun, W., Mei, Z., Guangming, W. and Guang, M. (2005), "Truss optimization on shape and sizing with frequency constraints based on genetic algorithm", J. Comput. Mech., 25, 361-368.
  16. Nayak, M.R., Nayak, C.K. and Rout, P.K. (2012), "Application of multi-objective teaching learning based optimization algorithm to optimal power flow problem", Procedia Technol., 6, 255-264. https://doi.org/10.1016/j.protcy.2012.10.031
  17. Niknam, T., Azizipanah-Abarghooee, R. and Aghaei, J. (2012), "A new modified teaching-learning algorithm for reserve constrained dynamic economic dispatch", Power Syst., IEEE Trans., 99, 1-15.
  18. Pantelides, C.P. and Tzan, S.R. (1997), "Optimal design of dynamically constrained structures", Comput. Struct., 62, 141-149. https://doi.org/10.1016/S0045-7949(96)00243-X
  19. Rajeev, S. and Krishnamoorthy, C.S. (1992), "Discrete optimization of structures using genetic algorithms", J. Struct. Eng., ASCE, 118, 1233-1250. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1233)
  20. Rao, R.V., Savsani, V.J. and Vakharia, D.P. (2011), "Teaching-learning-based optimization: a novel method for constrained mechanical design optimization problems", Comput. Aid. Des., 43, 303-315. https://doi.org/10.1016/j.cad.2010.12.015
  21. Satapathy, S.C. and Naik, A. (2011), "Data clustering based on teaching-learning-based optimization. Swarm, Evolutionary, and Memetic", Comput. Lec. Note. Comput. Sci., Springer-Verlag, Berlin.
  22. Togan, V. (2012), "Design of planar steel frames using teaching-learning based optimization", Eng. Struct., 34, 225-232. https://doi.org/10.1016/j.engstruct.2011.08.035
  23. Togan, V. and Daloglu, A. (2006), "Optimization of 3d trusses with adaptive approach in genetic algorithms", Eng. Struct., 28, 1019-1027. https://doi.org/10.1016/j.engstruct.2005.11.007
  24. Togan, V. and Daloglu, A. (2008), "An improved genetic algorithm with initial population strategy and selfadaptive member grouping", Comput. Struct., 86, 1204-1218. https://doi.org/10.1016/j.compstruc.2007.11.006
  25. Togan, V. (2013), "Design of pin jointed structures using teaching-learning based optimization", Struct. Eng. Mech., 47(2), 209-225. https://doi.org/10.12989/sem.2013.47.2.209
  26. Tong, W.H. and Liu, G.R. (2001), "An optimization procedure for truss structures with discrete design variables and dynamic constraints", Comput. Struct., 79, 155-162. https://doi.org/10.1016/S0045-7949(00)00124-3
  27. Torkzadeh, P., Salajegheh, J. and Salajegheh, E. (2008), "Efficient methods for structural optimization with frequency constraints using higher order approximations", Int. J. Struct. Stab. Dyn., 8, 439-450. https://doi.org/10.1142/S0219455408002739
  28. Wang, D., Zhang, W.H. and Jiang, J.S. (2004), "Truss optimization on shape and sizing with frequency constraints", AIAA J., 42(3), 622-630. https://doi.org/10.2514/1.1711
  29. Yildiz, A.R. (2012a), "A comparative study of population-based optimization algorithms for turning operations", Inform. Sci., 210, 81-88. https://doi.org/10.1016/j.ins.2012.03.005
  30. Yildiz, A.R. (2012b), "Optimization of multi-pass turning operations using hybrid teaching learning-based approach", Int. J. Adv. Manu. Tech., 66(9-12), 1319-1326. https://doi.org/10.1007/s00170-012-4410-y
  31. Yildiz, A.R. (2013a), "Comparison of evolutionary-based optimization algorithms for structural design optimization", Eng. App. Artif. Int., 26(1), 327-333. https://doi.org/10.1016/j.engappai.2012.05.014
  32. Yildiz, A.R. (2013b), "A new hybrid bee colony optimization approach for robust optimal design and manufacturing", Appl. Soft. Comput., 13(5), 2906-2912. https://doi.org/10.1016/j.asoc.2012.04.013
  33. Zuo, W.W., Xu, T., Zhang, H. and Xu, T. (2011), "Fast structural optimization with frequency constraints by genetic algorithm using adaptive eigenvalue reanalysis methods", Struct. Multidis. Optim., 43, 799-810. https://doi.org/10.1007/s00158-010-0610-y

피인용 문헌

  1. Sizing and layout design of truss structures under dynamic and static constraints with an integrated particle swarm optimization algorithm vol.51, 2017, https://doi.org/10.1016/j.asoc.2016.11.032
  2. Optimum variable input speed for kinematic performance of Geneva mechanisms using teaching-learning-based optimization algorithm vol.231, pp.10, 2017, https://doi.org/10.1177/0954406215623307
  3. A novel hybrid MOL–TLBO optimized techno-economic-socio analysis of renewable energy mix in island mode vol.43, 2016, https://doi.org/10.1016/j.asoc.2016.02.044
  4. Tea Category Identification Using a Novel Fractional Fourier Entropy and Jaya Algorithm vol.18, pp.12, 2016, https://doi.org/10.3390/e18030077
  5. A new hybrid meta-heuristic algorithm for optimal design of large-scale dome structures vol.50, pp.2, 2018, https://doi.org/10.1080/0305215X.2017.1313250
  6. Sizing, layout and topology design optimization of truss structures using the Jaya algorithm 2018, https://doi.org/10.1016/j.asoc.2017.10.001
  7. Time-Cost Trade-off Optimization of Construction Projects using Teaching Learning Based Optimization pp.1976-3808, 2018, https://doi.org/10.1007/s12205-018-1670-6
  8. Border-search and jump reduction method for size optimization of spatial truss structures pp.2095-2449, 2018, https://doi.org/10.1007/s11709-018-0478-2
  9. Optimum design of steel bridges including corrosion effect using TLBO vol.63, pp.5, 2015, https://doi.org/10.12989/sem.2017.63.5.607
  10. Numbers Cup Optimization: A new method for optimization problems vol.66, pp.4, 2015, https://doi.org/10.12989/sem.2018.66.4.465
  11. Estimation of BOD in wastewater treatment plant by using different ANN algorithms vol.9, pp.6, 2015, https://doi.org/10.12989/mwt.2018.9.6.455
  12. Optimization of the braced dome structures by using Jaya algorithm with frequency constraints vol.30, pp.1, 2015, https://doi.org/10.12989/scs.2019.30.1.047
  13. Continuous size optimization of large-scale dome structures with dynamic constraints vol.73, pp.4, 2015, https://doi.org/10.12989/sem.2020.73.4.397
  14. Prediction of Parameters which Affect Beach Nourishment Performance Using MARS, TLBO, and Conventional Regression Techniques vol.36, pp.1, 2015, https://doi.org/10.1007/s41208-019-00173-z
  15. Developing Nonlinear Behavior of Reinforced Concrete Elements Using an Intelligent Approach vol.25, pp.13, 2021, https://doi.org/10.1080/13632469.2019.1628126