Structural Engineering and Mechanics

  • 제53권4호
  • /
  • Pages.661-679
  • /
  • 2015
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Large deformation bending analysis of functionally graded spherical shell using FEM

  • 투고 : 2014.01.24
  • 심사 : 2014.09.18
  • 발행 : 2015.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this article, nonlinear finite element solutions of bending responses of functionally graded spherical panels are presented. The material properties of functionally graded material are graded in thickness direction according to a power-law distribution of volume fractions. A general nonlinear mathematical shallow shell model has been developed based on higher order shear deformation theory by taking the geometric nonlinearity in Green-Lagrange sense. The model is discretised using finite element steps and the governing equations are obtained through variational principle. The nonlinear responses are evaluated through a direct iterative method. The model is validated by comparing the responses with the available published literatures. The efficacy of present model has also been established by demonstrating a simulation based nonlinear model developed in ANSYS environment. The effects of power-law indices, support conditions and different geometrical parameters on bending behaviour of functionally graded shells are obtained and discussed in detail.

키워드

참고문헌

  1. Alijani, F. and Amabili, M. (2014), "Non-linear vibrations of shells: a literature review from 2003 to 2013", Int. J. Nonlin. Mech., 58, 233-257. https://doi.org/10.1016/j.ijnonlinmec.2013.09.012
  2. Bian, Z.G., Ying, J., Chen, W.Q. and Ding, H.J. (2006), "Bending and free vibration analysis of a smart functionally graded plate", Struct. Eng. Mech., 23(1), 97-113. https://doi.org/10.12989/sem.2006.23.1.097
  3. Bich, D.H. and Tung, H.V. (2011), "Non-linear axisymmetric response of functionally graded shallow spherical shells under uniform external pressure including temperature effects", Int. J. Nonlin. Mech., 46, 1195-1204. https://doi.org/10.1016/j.ijnonlinmec.2011.05.015
  4. Bich, D.H., Dung, D.V. and Hoa, L.K. (2012), "Nonlinear static and dynamic buckling analysis of functionally graded shallow spherical shells including temperature effects", Compos. Struct., 94, 2952-2960. https://doi.org/10.1016/j.compstruct.2012.04.012
  5. Birman, V. and Byrd, L.W. (2007), "Modeling and analysis of functionally graded materials and structures", Appl. Mech. Rev., 60, 195-216. https://doi.org/10.1115/1.2777164
  6. Cook, R.D., Malkus, D.S., Plesha, M.E. and Witt, R.J. (2009), Concepts and applications of finite element analysis, 4th Edition, John Wiley & Sons Pvt. Ltd., Singapore.
  7. Jha, D.K., Kant, T., Singh, R.K. (2013), "A critical review of recent research on functionally graded plates", Compos. Struct., 96, 833-849. https://doi.org/10.1016/j.compstruct.2012.09.001
  8. Lei, Z.X., Zhang, L.W., Liew, K.M. and Yu, J.L. (2014), "Dynamic stability analysis of carbon nanotubereinforced functionally graded cylindrical panels using the element-free kp-Ritz method", Compos. Struct., 113, 328-338. https://doi.org/10.1016/j.compstruct.2014.03.035
  9. Liew, K.M., Lei, Z.X., Yu, J.L. and Zhang, L.W. (2014), "Postbuckling of carbon nanotube-reinforced functionally graded cylindrical panels under axial compression using a meshless approach", Comput. Meth. Appl. Mech. Eng., 268, 1-17. https://doi.org/10.1016/j.cma.2013.09.001
  10. Liew, K.M., Zhao, X., Ferreira, A.J.M. (2011), "A review of meshless methods for laminated and functionally graded plates and shells", Compos. Struct., 93(8), 2031-2041. https://doi.org/10.1016/j.compstruct.2011.02.018
  11. Mantari, J.L., Oktem, A.S. and Soares, C.G. (2012), "Bending response of functionally graded plates by using a new higher order shear deformation theory", Compos. Struct., 94, 714-723. https://doi.org/10.1016/j.compstruct.2011.09.007
  12. Mao, Y.Q., Fu, Y.M., Chen, C.P. and Li, Y.L. (2011), "Nonlinear dynamic response for functionally graded shallow shell under low velocity impact in thermal environment", Appl. Math. Model., 35, 2887-2900. https://doi.org/10.1016/j.apm.2010.12.012
  13. Navazi, H.M. and Haddadpour, H. (2008), "Nonlinear cylindrical bending analysis of shear deformable functionally graded plates under different loadings using analytical methods", "Int. J. Mech. Sci., 50, 1650-1657. https://doi.org/10.1016/j.ijmecsci.2008.08.010
  14. Neves, A.M.A., Ferreira, A.J.M., Carrera, E., Cinefra, M., Roque, C.M.C., Jorge, R.M.N. and Soares, C.M.M. (2011), "Bending of FGM plates by a sinusoidal plate formulation and collocation with radial basis functions", Mech. Res. Commun., 38, 368-371. https://doi.org/10.1016/j.mechrescom.2011.04.011
  15. Neves, A.M.A., Ferreira, A.J.M., Carrera, E., Cinefra, M., Roque, C.M.C., Jorge, R.M.N. and Soares, C.M.M. (2012), "A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", Compos. Struct., 94, 1814-1825. https://doi.org/10.1016/j.compstruct.2011.12.005
  16. Oktem, A.S., Mantari, J.L. and Soares, C.G. (2012), "Static response of functionally graded plates and doubly-curved shells based on a higher order shear deformation theory", Eur. J. Mech. A-Solid., 36, 163-172. https://doi.org/10.1016/j.euromechsol.2012.03.002
  17. Reddy, J.N. (2003), Mechanics of laminated composite: Plates and shells-Theory and analysis, 2nd Edition, CRC press, Boca Raton, FL.
  18. Santos, H., Soares, C.M.M., Soares, C.A.M. and Reddy, J.N. (2009), "A semi-analytical finite element model for the analysis of cylindrical shells made of functionally graded materials", Compos. Struct., 91, 427-432. https://doi.org/10.1016/j.compstruct.2009.04.008
  19. Shen H.S. (2009), Functionally graded material: Nonlinear analysis of plates & shells, CRC press, Boca Raton, FL.
  20. Shen, H.S. (2002), "Nonlinear bending response of functionally graded plates subjected to transverse loads and in thermal environments", Int. J. Mech. Sci., 44, 561-584. https://doi.org/10.1016/S0020-7403(01)00103-5
  21. Talha, M. and Singh, B.N. (2010), "Static response and free vibration analysis of FGM plates using higher order shear deformation theory", Appl. Math. Model., 34, 3991-4011. https://doi.org/10.1016/j.apm.2010.03.034
  22. Thai, H.T. and Kim, S.E. (2013), "A simple higher-order shear deformation theory for bending and free vibration analysis of functionally graded plates", Compos. Struct., 96, 165-173. https://doi.org/10.1016/j.compstruct.2012.08.025
  23. Woo, J. and Meguid, S.A. (2001), "Nonlinear analysis of functionally graded plates and shallow shells", Int. J. Solid. Struct., 38, 7409-7421. https://doi.org/10.1016/S0020-7683(01)00048-8
  24. Xiang, S. and Kang G. (2013), "A nth-order shear deformation theory for the bending analysis on the functionally graded plates", Eur. J. Mech. A-Solid., 37, 336-343. https://doi.org/10.1016/j.euromechsol.2012.08.005
  25. Zenkour, A.M. and Sobhy, M. (2013), "Dynamic bending response of thermoelastic functionally graded plates resting on elastic foundations", Aerosp. Sci. Technol., 29, 7-17. https://doi.org/10.1016/j.ast.2013.01.003
  26. Zhang, L.W., Lei, Z.X., Liew, K.M. and Yu, J.L. (2014a), "Static and dynamic of carbon nanotube reinforced functionally graded cylindrical panels", Compos. Struct., 111, 205-212. https://doi.org/10.1016/j.compstruct.2013.12.035
  27. Zhang, L.W., Lei, Z.X., Liew, K.M. and Yu, J.L. (2014b), "Large deflection geometrically nonlinear analysis of carbon nanotube-reinforced functionally graded cylindrical panels", Comput. Meth. Appl. Mech. Eng., 273, 1-18. https://doi.org/10.1016/j.cma.2014.01.024
  28. Zhang, L.W., Zhu, P. and Liew, K.M. (2014), "Thermal buckling of functionally graded plates using a local Kriging meshless method", Compos. Struct., 108, 472-492. https://doi.org/10.1016/j.compstruct.2013.09.043
  29. Zhao, X. and Liew, K.M. (2009a), "Geometrically nonlinear analysis of functionally graded plates using the element-free kp-Ritz method", Comput. Meth. Appl. Mech. Eng., 198, 2796-2811. https://doi.org/10.1016/j.cma.2009.04.005
  30. Zhao, X. and Liew, K.M. (2009b), "Geometrically nonlinear analysis of functionally graded shells", Int. J. Mech. Sci., 51, 131-144. https://doi.org/10.1016/j.ijmecsci.2008.12.004
  31. Zhao, X., Lee, Y.Y. and Liew, K.M. (2009), "Thermoelastic and vibration analysis of functionally graded cylindrical shells", Int. J. Mech. Sci., 51, 694-707. https://doi.org/10.1016/j.ijmecsci.2009.08.001
  32. Zhu, P., Zhang, L.W. and Liew, K.M. (2014), "Geometrically nonlinear thermomechanical analysis of moderately thick functionally graded plates using a local Petrov-Galerkin approach with moving Kriging interpolation", Compos. Struct., 107, 298-314. https://doi.org/10.1016/j.compstruct.2013.08.001

피인용 문헌

  1. Deformation mechanisms of prototype composite braided stent-grafts in bending fatigue for peripheral artery application vol.78, 2018, https://doi.org/10.1016/j.jmbbm.2017.10.037
  2. Free vibration responses of temperature dependent functionally graded curved panels under thermal environment vol.12, pp.11, 2015, https://doi.org/10.1590/1679-78251691
  3. Nonlinear thermomechanical deformation behaviour of P-FGM shallow spherical shell panel vol.29, pp.1, 2016, https://doi.org/10.1016/j.cja.2015.12.007
  4. Thermal free vibration behavior of FG-CNT reinforced sandwich curved panel using finite element method 2017, https://doi.org/10.1002/pc.24266
  5. Research on nonlinear bending behaviors of FGM infinite cylindrical shallow shells resting on elastic foundations in thermal environments vol.170, 2017, https://doi.org/10.1016/j.compstruct.2017.03.010
  6. Thermoelastic Vibration and Flexural Behavior of FG-CNT Reinforced Composite Curved Panel vol.09, pp.04, 2017, https://doi.org/10.1142/S1758825117500466
  7. Evanescent waves in FGM spherical curved plates: an analytical treatment 2017, https://doi.org/10.1007/s11012-017-0800-4
  8. Thermoelastic nonlinear frequency analysis of CNT reinforced functionally graded sandwich structure vol.65, 2017, https://doi.org/10.1016/j.euromechsol.2017.05.005
  9. An analytical method for free vibration analysis of functionally graded sandwich beams vol.23, pp.1, 2016, https://doi.org/10.12989/was.2016.23.1.059
  10. Frequency analysis of nanoporous mass sensors based on a vibrating heterogeneous nanoplate and nonlocal strain gradient theory 2017, https://doi.org/10.1007/s00542-017-3531-5
  11. Stability Analysis of Frame Having FG Tapered Beam–Column pp.2093-6311, 2019, https://doi.org/10.1007/s13296-018-0133-8
  12. Geometrically nonlinear analysis of elastoplastic behavior of functionally graded shells pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0633-3
  13. fiber by steam explosion pp.1544-046X, 2018, https://doi.org/10.1080/15440478.2018.1477085
  14. Nonlinear Frequency Responses of Functionally Graded Carbon Nanotube-Reinforced Sandwich Curved Panel Under Uniform Temperature Field vol.10, pp.03, 2018, https://doi.org/10.1142/S175882511850028X
  15. A new five unknown quasi-3D type HSDT for thermomechanical bending analysis of FGM sandwich plates vol.22, pp.5, 2015, https://doi.org/10.12989/scs.2016.22.5.975
  16. A novel and simple HSDT for thermal buckling response of functionally graded sandwich plates vol.62, pp.4, 2017, https://doi.org/10.12989/sem.2017.62.4.401
  17. A new and simple HSDT for thermal stability analysis of FG sandwich plates vol.25, pp.2, 2015, https://doi.org/10.12989/scs.2017.25.2.157
  18. A novel and simple higher order shear deformation theory for stability and vibration of functionally graded sandwich plate vol.25, pp.4, 2017, https://doi.org/10.12989/scs.2017.25.4.389
  19. Thermoelastic flexural analysis of FG-CNT doubly curved shell panel vol.90, pp.1, 2015, https://doi.org/10.1108/aeat-11-2015-0237
  20. Novel quasi-3D and 2D shear deformation theories for bending and free vibration analysis of FGM plates vol.14, pp.6, 2015, https://doi.org/10.12989/gae.2018.14.6.519
  21. Bending of FGM rectangular plates resting on non-uniform elastic foundations in thermal environment using an accurate theory vol.27, pp.3, 2018, https://doi.org/10.12989/scs.2018.27.3.311
  22. Free vibration of FGM plates with porosity by a shear deformation theory with four variables vol.66, pp.3, 2015, https://doi.org/10.12989/sem.2018.66.3.353
  23. Three dimensional finite elements modeling of FGM plate bending using UMAT vol.66, pp.4, 2018, https://doi.org/10.12989/sem.2018.66.4.487
  24. Eigenfrequencies of advanced composite plates using an efficient hybrid quasi-3D shear deformation theory vol.22, pp.1, 2018, https://doi.org/10.12989/sss.2018.22.1.121
  25. Buckling analysis of nanoplate-type temperature-dependent heterogeneous materials vol.7, pp.1, 2015, https://doi.org/10.12989/anr.2019.7.1.051
  26. Dynamic investigation of porous functionally graded beam using a sinusoidal shear deformation theory vol.28, pp.1, 2015, https://doi.org/10.12989/was.2019.28.1.019
  27. Experiment and Finite Element Analysis on the Ultimate Strength of Ring-Stiffened Tube-Gusset Joints vol.19, pp.5, 2015, https://doi.org/10.1007/s13296-019-00227-1
  28. Wave dispersion properties in imperfect sigmoid plates using various HSDTs vol.33, pp.5, 2015, https://doi.org/10.12989/scs.2019.33.5.699
  29. Porosity-dependent free vibration analysis of FG nanobeam using non-local shear deformation and energy principle vol.8, pp.1, 2020, https://doi.org/10.12989/anr.2020.8.1.037
  30. Nonlinear deformation and stress responses of a graded carbon nanotube sandwich plate structure under thermoelastic loading vol.231, pp.3, 2020, https://doi.org/10.1007/s00707-019-02579-5
  31. Influence of boundary conditions on the bending and free vibration behavior of FGM sandwich plates using a four-unknown refined integral plate theory vol.25, pp.3, 2020, https://doi.org/10.12989/cac.2020.25.3.225
  32. Mechanical analysis of functionally graded spherical panel resting on elastic foundation under external pressure vol.74, pp.2, 2015, https://doi.org/10.12989/sem.2020.74.2.297
  33. Influence of material composition on buckling response of FG plates using a simple plate integral model vol.25, pp.4, 2015, https://doi.org/10.12989/sss.2020.25.4.447
  34. 2D and quasi 3D computational models for thermoelastic bending of FG beams on variable elastic foundation: Effect of the micromechanical models vol.22, pp.4, 2020, https://doi.org/10.12989/gae.2020.22.4.361
  35. Dynamic and stability analysis of functionally graded material sandwich plates in hygro-thermal environment using a simple higher shear deformation theory vol.23, pp.3, 2015, https://doi.org/10.1177/1099636219845841
  36. Deformation characteristics of functionally graded bio-composite plate using higher-order shear deformation kinematics vol.21, pp.3, 2015, https://doi.org/10.3233/jcm-200044