대한산업공학회지 (Journal of Korean Institute of Industrial Engineers)

  • 제41권1호
  • /
  • Pages.97-104
  • /
  • 2015
  • /
  • 1225-0988(pISSN)
  • /
  • 2234-6457(eISSN)
대한산업공학회 (Korean Institute of Industrial Engineers)
권호 표지
DOI QR코드

DOI QR Code

에너지 전환 이상기능 기반 다구찌 동특성을 활용한 Fan Case 설계

Fan Case Design using Energy Conversion Ideal Function Based Taguchi Dynamic Characteristics

  • Ji, Soo Yoon (Department of Industrial Engineering, Ajou University) ;
  • Jang, Joong Soon (Department of Industrial Engineering, Ajou University)
  • 투고 : 2014.06.02
  • 심사 : 2014.11.14
  • 발행 : 2015.02.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An electric-motor which uses electric energy to dry laundry in a dryer generates wind by rotating a fan. The roles of electric motor and fan are crucial for drying. To reduce the noises or vibration, their performances should be improved. However, it requires a relatively high cost to redesign them. In this case, redesigning the fan case rather than the motor or the fan would be easier and cheaper. This paper is to apply Taguchi dynamic characteristic concept with the ideal function of energy conversion to redesign the fan case. Not only the increase of the wind power but also the decrease of noise, vibration and the other side effects are resulted.

키워드

참고문헌

  1. Asakawa, A. and Ueno, K. (1992), Technology Development for Transformability, Quality Engineering Application Series. Tokyo : Japanese Standards Association, 61-82
  2. Genichi Taguchi, Subir Chowdhury, Yuin Wu (2005), TAGUCHI'S Quality Engineering HANDBOOK, WILEY, 957-964.
  3. Cha, K. J. and Chin, C. U. (2002), The Optimal Design of Low Noise Intake System Using Taguchi Method with Non-controllable Factors, Journal of the Korean Society for Quality Management, 28(1), 41-56.
  4. Ji, C. M. and Ree, S. B. (2005), The Study of Measure of Company Quality Competitive by using MTS Method, Journal of the Korean Society for Quality Management, 33(2), 41-56.
  5. Kim, S. J. (2013), A Review on the Taguchi Method and Its Alternatives for Dynamic Robust Design, Journal of the Korean Institute of Industrial Engineers, 39(5), 351-360. https://doi.org/10.7232/JKIIE.2013.39.5.351
  6. Koyama, Y., Sakurai, K., and Kato, A. (2000), Optimization of Adhesion Condition of Resin Board and Copper Plate, Proceedings of the 8th Quality Engineering Symposium, 262-265
  7. Taguchi, G., Subir, C. H., Wu, Y. I. (2005), TAGUCHI'S Quality Engineering HANDBOOK, WILEY, 890-894.
  8. Kwon, H. M. and Jang, H. A. (2013), Case Studies on Strengths and Weaknesses of Taguchi Method, Journal of the Korean Institute of Industrial Engineers, 39(5), 383-392. https://doi.org/10.7232/JKIIE.2013.39.5.383
  9. Lee, S. H., Byun, J. H. and Kwon, H. K. (1995), Optimization of a Plastic Injection Moulding Operation Using Taguchi Methods, Proceedings of the Korean Institute of Industrial Engineers, 277-282.
  10. Lee, S. H., Min, B. H., and Kim, B. G. (2002), Optimizing the Injection Molding Process for Cooling Filter Using Computer Simulation and Taguchi Methods, IE Interfaces, 15(3), 263-269.
  11. Mori, T. (1995), Taguchi Techniques for Image and Pattern Developing Technology, Prentice Hall PTR, Englewood Cliffs, New Jersey 07632, 60.
  12. Taguchi, G. (1993), Quality Engineering Series 1, Research and Development, KSA Translation, Seoul, Korea.
  13. Taguchi, G. (1993), Quality Engineering Series 3, Signal-to-Noise Ratio for Quality Evaluation, KSA Translation, Seoul, Korea.
  14. Taguchi, G. (1993), Quality Engineering Series 4, Design of Experiments, KSA Translation, Seoul, Korea.
  15. Taguchi, G. (1996), ASI, 2nd Total Product Development Symposium QFD/TRIZ(TIPS)/TAGUCHI), California, Pomona.
  16. Taguchi, G. Subir, C. H., Wu, Y. I. (2005), TAGUCHI'S Quality Engineering HANDBOOK, WILEY, 8, 236, 229, 355.
  17. Takahashi, K., Kousaka, S., Hoshiya, K. Yano, K., Nishiuchi, N. and Yano H. (2000), Optimization of machining condition through observation of electric power consumption, Quality Engineering, 8(1), 24-30.
  18. Genichi Taguchi, Subir Chowdhury, Yuin Wu (2005), TAGUCHI'S Quality Engineering HANDBOOK, WILEY, 806-818.
  19. Ueno, K. (1993), "Machining technology development for high performance steel to which concept of transformability is applied, Quality Engineering, 1(1), 26-30
  20. Genichi Taguchi, Subir Chowdhury, Yuin Wu (2005), TAGUCHI'S Quality Engineering HANDBOOK, WILEY, 819-826.
  21. Yum, B. J., Ko, S. W., and Kim, J. H. (1990), The Taguchi Method for Product and Process Design, Journal of The Korean Operations Research and Management Science Society, 7(2), 3-21.
  22. Yum, B. J., Kim, S. J., Seo, S. K., Byun, J. H., and Lee, S. H. (2013), The Taguchi Robust Design Method : Current Status and Future Directions, Journal of the Korean Institute of Industrial Engineers, 39(5), 325-341. https://doi.org/10.7232/JKIIE.2013.39.5.325
  23. Yum, B. J., Lee, B. Y., Ko, S. W., and Kim, J. H. (1991), Principle for Constructing Taguchi Experimental Designs, The Korean journal of applied statistics, 4(1), 47-63.