과제정보
연구 과제 주관 기관 : National Research Foundation of Korea (NRF)
참고문헌
- Battelle, 2004. Mesh-insensitive structural stress method for fatigue evaluation of welded structures. Battelle: Center for Welded Structures Research.
- Dong, P., 2001. A structural stress definition and numerical implementation for fatigue analysis of welded structures. International Journal of Fatigue, 23, pp.865-876. https://doi.org/10.1016/S0142-1123(01)00055-X
- Dong, P. and Hong, J.K., 2003. Analysis of hot spot stress and alternative structural stress methods. Proceedings of the 22nd International Conference on Offshore Mechanics and Arctic Engineering, Cancun, Mexico, 8-13 June 2003, pp.213-224
- Dong, P., 2004. The mesh-insensitive structural stress and master S-N curve method for ship structures. Proceedings of OMAE Specialty Conference on Integrity of Floating Production, Storage & Ojjloading (FPSO) Systems, Houston, 30 August-2 September 2004.
- Dong, P., 2005. A robust structural stress method for fatigue evaluation of ship structures. Journal of Offshore Mechanics and Arctic Engineering, 127(1), pp.68-74. https://doi.org/10.1115/1.1854698
- Gurney, T.R., 1981. Some comments on fatigue design rules for offshore structures. Proceedings of 2nd International Symposium on Integrity of Offshore Structures, Elsevier Science Ltd, pp.219-234.
- Gurney, T.R., 1995. Thickness effect in "Relatively Thin " weldedjoints. Cambridge: The Welding Institute Abington Hall Abington Cambridge, Health and Safety Executive.
- Healy, B., 2004. Hot spot stress analysis of a side shell connection using surface extrapolation and the battelle structural stress method. Proceedings of OMAE Specialty Conference on Integrity of Floating Production, Storage & OjJloading (FPSO) Systems, Houston, 30 August-2 September 2004.
- Hong, J.K. and Dong, P., 2004. Hot spot stress and structural stress analysis of FP SO fatigue details. Proceedings ofOMAE Specialty Conference on Integrity of Floating Production, Storage & OjJloading (FPSO) Systems, Houston, 30 August-2 September 2004.
- Hobbacher, A., 2009. Recommendations for fatigue design of welded joints and components, international institute of welding Doc XIII-1823-07. New York: Welding Research Council Bulletin 520.
-
IACS, 2010a. Bulk carrier CSR - revision history, international association of classification societies. [online] Available at:
- IACS, 2010b. Common structural rules for bulk carries. London: International Association of Classification Societies.
- Kim, M.H., Kim, S.M., Kim, Y.N., Kim, S.G., Lee, K.Y and Kim, K.R., 2009. A comparative study for the fatigue assessment of a ship structure by use of hot spot stress and structural stress approaches. Ocean Engineering, 36, pp. 1067 -1072. https://doi.org/10.1016/j.oceaneng.2009.07.001
- Lee, J.M., Seo, J.K., Kim, M.H., Shin, S.B., Han, M.S., Park, J.S. and Mahendran, M., 2010, Comparison of hot spot stress evaluation methods for welded structures. International Journal of Naval Architecture and Ocean Engineering, 2(4), pp.200-210. https://doi.org/10.3744/JNAOE.2010.2.4.200
- Orjaster, O.,1995. Effect of plate thickness onfatigue of welded components, IIW-DOC XIII-1582-95. Paris: International Institute of Welding.
- Park, T.Y., Jang, C.D., Suh, YS. and Kim, BJ., 2011. A parametric study on spectral fatigue analysis for 170K LNGC. International Journal of Naval Architecture and Ocean Engineering, 3(2), pp.116-121. https://doi.org/10.3744/JNAOE.2011.3.2.116
- Yagi, J., Machida, S., Tomita, Y., Matoba, M. and Soya, I., 1991. Influencingfactors on thickness effect offatigue strength in As-welded joints for steel structures, Document No. XIII-1405-91. Paris: International Institute of Welding.
피인용 문헌
- The effect of initial stress induced during the steel manufacturing process on the welding residual stress in multi-pass butt welding vol.10, pp.2, 2015, https://doi.org/10.1016/j.ijnaoe.2017.02.007
- Efficient fatigue assessment of the upper and lower hopper knuckle connections of an oil tanker vol.235, pp.1, 2015, https://doi.org/10.1177/1475090220945460