원추형 유동층 연소기 내의 열전달에 미치는 복원계수의 영향에 대한 수치해석 연구

A Numerical Study on the Effect of Coefficient of Restitution to Heat Transfer in a Conical Fluidized Bed Combustor

  • 강승모 (부경대학교 소방공학과) ;
  • 박외철 (부경대학교 소방공학과) ;
  • ;
  • 고동국 (전북대학교 기계공학과) ;
  • 임익태 (전북대학교 기계설계공학부)
  • Kang, Seung Mo (Department of Fire-fighting Engineering, Pukyong Univ.) ;
  • Park, Woe-Chul (Department of Fire-fighting Engineering, Pukyong Univ.) ;
  • Abdelmotalib, Hamada (Department of Mechanical Design Eng., Chonbuk National University) ;
  • Ko, Dong Kuk (Department of Mechanical Engineering, Chonbuk National University) ;
  • Im, Ik-Tae (Department of Mechanical Design Eng., Chonbuk National University)
  • 투고 : 2015.11.16
  • 심사 : 2015.12.21
  • 발행 : 2015.12.31

초록

In this paper, numerical simulations on conical fluidized bed combustors were carried out to estimate the effect of coefficients of restitution between particle and particle and particle to wall on hydrodynamics and heat transfer. The Eulerian-Eulerian two-fluid model was used to simulate the hydrodynamics and heat transfer in a conical fluidized bed combustor. The solid phase properties were calculated by applying the kinetic theory of granular flow. Simulations results show that increasing the restitution coefficient between the particle and particle results in increasing the bed pressure drop. On other hand, the increasing of particle to wall coefficient of restitution results in decreasing the bed pressure drop. It is found that the coefficient of restitution has little effect on heat transfer.

키워드

참고문헌

  1. Herzog, A. V., Lipman, T. E., Kammen, D. M., Renewable energy sources, Renewable and Appropriate Energy Laboratory (RAEL), University of California, Berkeley, USA, (2001).
  2. Kendry, P. M., "Energy production from biomass (part 2): Conversion technologies," Bioresource Technology, 83, pp. 47-54, (2002). https://doi.org/10.1016/S0960-8524(01)00119-5
  3. Wang, L., Weller, L. C., Jones, D. D., Hanna, M. A., "Contemporary issues in thermal gasification of biomass and its application to electricity and fuel production," Biomass and Bioenergy, 32, pp. 573-581, (2008). https://doi.org/10.1016/j.biombioe.2007.12.007
  4. Kuprianov, V. I., Arromdee, P., "Combustion of peanut and tamarind shells in a conical fluidized-bed combustor: a comparative study", Bioresource Technology, 210, pp. 140-199, (2013).
  5. Kouprianov, V. I., Permchart, W., "Emission from a conical FBC fired with a biomass fuel", Applied Energy, 74, pp. 383-392, (2003). https://doi.org/10.1016/S0306-2619(02)00194-0
  6. Ninduangdee, P., Kuprianov, V. I., "Study on burning oil palm kernel shell in a conical fluidized-bed combustor using alumina as the bed material", Journal of the Taiwan Institute of Chemical Engineers, 44, pp.1045-1053, (2013). https://doi.org/10.1016/j.jtice.2013.06.011
  7. Kumar, M. M., Natarajan, E., "CFD simulation for two-phase mixing in 2D fluidized bed", International Journal of Advanced Manufacturing Technoogy, DOI 10.1007/s00170-008-1875-9 (2009).
  8. Chalermsinsuwan, B., Chanchuey, T., Buakhao, W., Gidaspow, D., Piumsomboon, P., "Computational fluid dynamics of circulating fluidized bed downer: Study of modeling parameters and system hydrodynamic characteristics", Chemical Engineering Journal, 189-190, pp. 314-335, (2012). https://doi.org/10.1016/j.cej.2012.02.020
  9. Lun, C. K. K., Savage, S. B., Jeffrey, N., "Kinetic theory for granular flow: Inelastic particles in couette flow and slightly inelastic particles in a general flow field", Journal of Fluid Mechanics, 140, pp. 223-235, (1984). https://doi.org/10.1017/S0022112084000586
  10. Gidaspow, D., Multiphase flow and fluidization: Continuum and kinetic theory descriptions, New York, Academic Press (1994).
  11. Fluent Inc, Fluent 6.3 User's Guide, Fluent Inc., Lebanon, (2006).
  12. Patankar, S. V., Numerical heat transfer and fluid flow, Washington DC, Hemisphere Publishing Corporation, (1980).
  13. Johnson, P. C., Jackson, R., "Frictional collisional constitutive relations for granular materials with application to plane shearing", Journal of Fluid Mechanics, 176, pp. 67- 93, (1987). https://doi.org/10.1017/S0022112087000570
  14. Gunn, D. J., "Transfer of heat or mass to particles in fixed and fluidized beds, International Journal of Heat and Mass Transfer, 21, pp. 467-476, (1978). https://doi.org/10.1016/0017-9310(78)90080-7
  15. Zabrodsky, S. S., Hydrodynamics and heat transfer in fluidized beds, MIT Press, Cambridge, MA, (1963).
  16. Kuipers, J. A., Prins, W. Swaaij, W. P., "Numerical calculation of wall to bed heat-transfer coefficients in gas fluidized beds", AlChE Journal, 38, pp. 1079-1091, (1997)