DOI QR코드

DOI QR Code

Natural frequency of a composite girder with corrugated steel web

  • Moon, Jiho (New Transportation Research Center, Korea Railroad Research Institute (KRRI)) ;
  • Ko, Hee-Jung (School of Civil, Environmental & Architectural Engineering, Korea University) ;
  • Sung, Ik Hyun (Department of Civil Engineering, Hanseo University) ;
  • Lee, Hak-Eun (School of Civil, Environmental & Architectural Engineering, Korea University)
  • 투고 : 2013.06.27
  • 심사 : 2014.06.08
  • 발행 : 2015.01.25

초록

This paper presents the natural frequency of a composite girder with corrugated steel web (CGCSW). A corrugated steel web has negligible in-plane axial stiffness, due to the unique characteristic of corrugated steel webs, which is called the accordion effect. Thus, the corrugated steel web only resists shear force. Further, the shear buckling resistance and out-of-plane stiffness of the web can be enhanced by using a corrugated steel web, since the inclined panels serve as transverse stiffeners. To take these advantages, the corrugated steel web has been used as an alternative to the conventional pre-stressed concrete girder. However, studies about the dynamic characteristics, such as the natural frequency of a CGCSW, have not been sufficiently reported, and it is expected that the natural frequency of a CGCSW is different from that of a composite girder with flat web due to the unique characteristic of the corrugated steel web. In this study, the natural frequency of a CGCSW was investigated through a series of experimental studies and finite element analysis. An experimental study was conducted to evaluate the natural frequency of CGCSW, and the results were compared with those from finite element analysis for verification purpose. A parametric study was then performed to investigate the effect of the geometric characteristics of the corrugated steel web on the natural frequency of the CGCSW. Finally, a simplified beam model to predict the natural frequency of a CGCSW was suggested.

키워드

과제정보

연구 과제 주관 기관 : Korea University

참고문헌

  1. ABAQUS (2009), ABAQUS analysis user's manual version 6.9-2, Dassault systemes Simulia Corp. Providence, RI, USA.
  2. Abbas, H.H., Sause, R. and Driver, R.G. (2007), "Analysis of flange transverse bending of corrugated web I-girders under in-plane loads", J. Struct. Eng. ASCE, 133(3), 347-355. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:3(347)
  3. Biancolini, M.E., Brutti, C. and Porziani, S. (2009), "Analysis of corrugated board panels under compression load", Steel. Compos. Struct., Int. J., 9(1), 1-17. https://doi.org/10.12989/scs.2009.9.1.001
  4. Chan, C.L., Khalid, Y.A., Sahari, B.B. and and Hamouda, A.M.S. (2002), "Finite element analysis of corrugated web beams under bending", J. Constr. Steel. Res., 58(11), 1391-1406. https://doi.org/10.1016/S0143-974X(01)00075-X
  5. Ding, Y., Jiang, K., Shao, F. and Deng, A. (2013), "Experimental study on ultimate torsional strength of PC composite box-girder with corrugated steel webs under pure torsion", Struct. Eng. Mech., Int. J., 46(4), 519-531. https://doi.org/10.12989/sem.2013.46.4.519
  6. Easley, J.T. and McFarland, D.E. (1969), "Buckling of light-gauge corrugated metal shear diaphragms", J. Sruct. Div. ASCE, 95(ST7), 1497-1516.
  7. Elgaaly, M., Seshadri, A. and Hamilton, R.W. (1997), "Bending strength of steel beams with corrugated webs", J. Struct. Eng. ASCE, 123(6), 772-782. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(772)
  8. Hamilton, R.W. (1993), "Behavior of welded girder with corrugated webs", Ph. D. Thesis, University of Maine, Orono, ME, USA.
  9. Heins, C.P. (1975), Bending and Torsional Design in Structural Members, Lexington Books, MA, USA.
  10. Ibrahim, S.A., El-Dakhakhni, W.W. and Elgaaly, M. (2006), "Behavior of bridge girder with corrugated webs under monotonic and cyclic loading", Eng. Struct., 28(14), 1941-1955. https://doi.org/10.1016/j.engstruct.2006.03.026
  11. Kiymaz, G., Coskun, E., Cosgun, C. and Seckin E. (2010), "Transverse load carrying capacity of sinusoidally corrugated steel web beams with web openings", Steel Compos. Struct., Int. J., 10(1), 69-85. https://doi.org/10.12989/scs.2010.10.1.069
  12. Ko, H.-J., Moon, J., Shin,Y.-W. and Lee, H.-E. (2013), "Non-linear analyses model for composite box-girders with corrugated steel webs under torsion", Steel Compos. Struct., Int. J., 14(5), 409-429. https://doi.org/10.12989/scs.2013.14.5.409
  13. Luo, R. and Edlund, B. (1996), "Shear capacity of plate girders with trapezoidally corrugated webs", Thin-Wall. Struct., 26(1), 19-44. https://doi.org/10.1016/0263-8231(96)00006-7
  14. Machimdarong, C., Watanabe, E. and Utsunomiya, T. (2004), "Analysis of corrugated steel web girders by an efficient beam bending theory", Struct. Eng. / Earthq. Eng. JSCE, 21(2), 131s-142s. https://doi.org/10.2208/jsceseee.21.131s
  15. Moon, J., Yi, J., Choi, B.H. and Lee, H.-E. (2009a), "Lateral-torsional buckling of I-girder with corrugated webs under uniform bending", Thin-Wall. Struct., 47(1), 21-30. https://doi.org/10.1016/j.tws.2008.04.005
  16. Moon, J., Yi, J., Choi, B.H. and Lee, H.-E. (2009b), "Shear strength and design of trapezoidally corrugated steel webs", J. Constr. Steel. Res., 65(5), 1198-1205. https://doi.org/10.1016/j.jcsr.2008.07.018
  17. Moon, J., Lim, N.-M. and Lee, H.-E. (2013), "Moment gradient correction factor and inelastic flexuraltorsional buckling of I-girder with corrugated steel webs", Thin-Wall. Struct., 62, 18-27. https://doi.org/10.1016/j.tws.2012.07.023
  18. Samanta, A. and Mukhopadhyay, M. (1999), "Finite element static and dynamic analyses of folded plates", Eng. Struct., 21(3), 227-287.
  19. Yi, J., Gil, H., Youm, K. and Lee, H.-E. (2008), "Interactive shear buckling of trapezoidally corrugated webs", Eng. Struct., 30(6), 1659-1666. https://doi.org/10.1016/j.engstruct.2007.11.009
  20. Yoda, T., Ohura, T. and Sekii, K. (1994), "Analysis of composite PC Box girders with corrugated steel webs", Proceedings of the 4th International Conference on Short and Medium Span Bridges, Halifax, Canada, August, pp. 1107-1115.

피인용 문헌

  1. Flexural Vibration of Prestressed Concrete Bridges with Corrugated Steel Webs vol.17, pp.02, 2017, https://doi.org/10.1142/S0219455417500237
  2. Theoretical Analysis for Local Buckling of Corrugated Steel Plate vol.38, pp.2267-1242, 2018, https://doi.org/10.1051/e3sconf/20183803002
  3. Free vibrations of precast modular steel-concrete composite railway track slabs vol.24, pp.1, 2015, https://doi.org/10.12989/scs.2017.24.1.113