DOI QR코드

DOI QR Code

Numerical Analysis of NACA64-418 Airfoil with Blunt Trailing Edge

  • Yoo, Hong-Seok (Department of Mechanical Engineering, Andong National University) ;
  • Lee, Jang-Chang (Department of Mechanical Engineering, Andong National University)
  • 투고 : 2015.07.27
  • 심사 : 2015.12.22
  • 발행 : 2015.12.30

초록

The aerodynamic performance of blunt trailing edge airfoils was investigated. The flow fields around the modified NACA64-418, which consists of the tip blade of the wind turbine and Mexico model of IEA wind, were analyzed. To imitate the repaired airfoil, the original NACA64-418 airfoil, a cambered airfoil, is modified by the adding thickness method, which is accomplished by adding the thickness symmetrically to both sides of the camber line. The thickness ratio of the blunt trailing edge of the modified airfoil, $t_{TE}/t_{max}$, is newly defined to analyze the effects of the blunt trailing edge. The shape functions describing the upper and lower surfaces of the modified NACA64-418 with blunt trailing edge are obtained from the curve fitting of the least square method. To verify the accuracy of the present numerical analysis, the results are first compared with the experimental data of NACA64-418 with high Reynolds number, $Re=6{\times}10^6$, measured in the Langley low-turbulence pressure tunnel. Then, the aerodynamic performance of the modified NACA64-418 is analyzed. The numerical results show that the drag increases, but the lift increases insignificantly, as the trailing edge of the airfoil is thickened. Re-circulation bubbles also develop and increase gradually in size as the thickness ratio of the trailing edge is increased. These re-circulations result in an increase in the drag of the airfoil. The pressure distributions around the modified NACA64-418 are similar, regardless of the thickness ratio of the blunt trailing edge.

키워드

참고문헌

  1. J. G. Schepers, K. Boorsma, T. Cho, S. Gomez-Iradi, P. Schaffarczyk, A. Jeromin, W. Z. Shen, T. Lutz, K. Meister, B. Stoevesandt, S. Schreck, D. Micallef, R. Pereira, T. Sant, H. A. Madsen, and N. Sorensen, "Final report of IEA task 29, Mexnext(phase 1): Analysis of Mexico wind tunnel measurements," iea wind, 2012. http://www.mexnext.org/resultsstatus.
  2. W. A. Timmer, "An overview of NACA 6-digit airfoil series characteristics with reference to airfoils for large wind turbine blades", 47th AIAA Aerospace Science Meeting, Orlando, USA, 2009.
  3. J. L. Summers and W. A. Page, "Lift and moment characteristics at subsonic Mach numbers of four 10-percentthick airfoil sections of varying trailing-edge thickness", Ames Aeronautical Laboratory, California, USA, NACA RMA50J09, 1995.
  4. H. A. Smith and R. F. Schaefer, Aerodynamic characteristics at Reynolds numbers of 3.0x106 and 6x106 of three airfoil sections formed by cutting off various amount from the near portion of the NACA0012 airfoil section, Langley Aeronautical Laboratory, USA, NACA TN 2074, 1950.
  5. K. J. Standish and C. P. van Dam, "Aerodynamic analysis of blunt trailing edge airfoils", Journal of Solar Energy Engineering, Vol. 125, 2003, pp. 479-487. https://doi.org/10.1115/1.1629103
  6. J. P. Murcia and A. Pinilla, "CFD analysis of blunt trailing edge airfoils obtained with several modification methods, Universidad de los Andes", Bogota D.C., Colombia, Rev.ing, ISSN 0121-4993, Enero-junio de, 2011, pp. 14-24.
  7. ANSYS Fluent User's Guide.
  8. F. R. Menter at el, "A correlation based transition model using local variables part 1 - model formulation", Journal of Turbomachinery, Vol. 128, No. 3, 2004, pp. 413-42 https://doi.org/10.1115/1.2184352
  9. Rolling Stone Corporation. http://www.rs-corp.co.kr
  10. Acciona Windpower, AW3000 Specifications, ACCIONA Group. URL: http://www.acciona-windpower.com
  11. Lee K. H. "3MW Offshore Wind Turbine System", KSME, 2010, pp. 4498-4511.
  12. J. Jonkman, S. Butterfield, W. Musial and G. Scott, "Definition of a 5-MW Reference Wind Turbine for Offshore System Development", Technical Report NREL/TP-500-38060, 2009.
  13. The University of Edinburgh, Academic Study: Matching Renewable Electricity Generation With Demand: Full Report, Scottish Executive, 2006.