전력망에서의 이더넷 활용기술 : Field Area Network 분야

  • Published : 2015.12.31

Abstract

전력산업은 오랫동안 다른 산업의 발전을 위하여 에너지를 안정적이고 또 효율적으로 공급하는 것에 집중하였다. 그러나 신기후체제 출범 이후에는 에너지산업의 혁신이라는 큰 목표를 달성하기 위해 다양한 노력을 진행하고 있다. 특히 기존의 폐쇄망으로 운영되던 전력망을 개방형, 양방향 통신망으로 업그레이드를 하고 있으며, 그 중심에는 이더넷 기술이 있다. 이더넷 기술은 높은 확장성으로 전력망에 손쉽게 적용이 가능하다. 하지만 안정성, 신뢰성 등에 대해서는 추가 고려가 필요한 상황이다. 이에 본고에서는 전력망의 요구사항을 분석하고, 이를 만족시키기 위한 이더넷 활용기술 및 활용사례에 대해 살펴보고자 한다.

Keywords

References

  1. 산업통상자원부, 미래창조과학부,"2030 에너지 신산업 확산전략,"2015년 11월, from http://www.motie.go.kr
  2. R. Zurawski, "Industrial Communication Technology Handbook, 2ndEd.,"CRCPress, 2015
  3. 박명혜, 김영현, "전력시스템에서의 Ethernet 활용방안," 한국이더넷포럼 워크샵, 2015년 8월
  4. IEC 61850-90-4 Standard for Network Engineering Guidelines for Communication Networks and Systems in Substations, 2013.
  5. IEC 61850 Standard for Power Utility Automation for Communication Networks and Systems in Substations, 2004.
  6. 한국전력공사, 스마트그리드를 위한 차세대 융합통신망 기술개발 보고서, 2012
  7. IEC 62439-3 Standard for Industrial Communication Networks - High Availability Automation Networks, Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR), 2012.
  8. Kirrmann H., Weber K., Kleineberg O. and Weibel H. "HSR: Zero recovery time and low-cost redundancy for Industrial Ethernet (High availability Seamless Redundancy, IEC 62439-3)," IEEE Conference on Emerging Technologies & Factory Automation(ETFA) 2009, Mallorca, Spain, pp. 14, September
  9. Administrative Committee of the Power System Dynamic Performance Committee, Causes of the 2003 Major Grid Blackouts in North America and Europe, and Recommended Means to Improve System Dynamic Performance, IEEE, from http://ewh.ieee.org
  10. IEEE 1588 Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, 2008
  11. 한국전력공사, IoT기반 에너지플랫폼 및 게이트웨이 개발 보고서, 2016
  12. 한국전력공사, 통합단말장치 구매규격서, 2016, from http://www.kepco.co.kr