Advances in concrete construction

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

SFRHPC interior beam-column-slab joints under reverse cyclic loading

  • Ganesan, N. (Department of Civil Engineering, National Institute of Technology Calicut) ;
  • Nidhi, M. (Department of Civil Engineering, National Institute of Technology Calicut) ;
  • Indira, P.V. (Department of Civil Engineering, National Institute of Technology Calicut)
  • Received : 2015.09.30
  • Accepted : 2015.12.23
  • Published : 2015.09.25
⟨ Previous Next ⟩

Abstract

Beam-column joints are highly vulnerable locations which are to be designed for high ductility in order to take care of unexpected lateral forces such as wind and earthquake. Previous investigations reveal that the addition of steel fibres to concrete improves its ductility significantly. Also, due to presence of slab the strength and ductility of the beam increases considerably and ignoring the effect of slab can lead to underestimation of beam capacity and defiance of strong column weak beam concept. The influence of addition of steel fibres on the strength and behaviour of steel fibre reinforced high performance concrete (SFRHPC) interior beam-column-slab joints was investigated experimentally. The specimens were subjected to reverse cyclic loading. The variable considered was the volume fraction of crimped steel fibres i.e., 0%, 0.5% and 1.0%. The results show that the addition of steel fibres improves the first crack load, strength, ductility, energy absorption capacity and initial stiffness of the beam.

Keywords

References

  1. Abbas, A.A., Mohsin, S.M.S. amd Cotsovos, D.M. (2014), "Seismic response of steel fibre reinforced concrete beam-column joints", Eng. Struct., 59, 261-283. https://doi.org/10.1016/j.engstruct.2013.10.046
  2. ACI 211.1-91 (1991), Standard practice for selecting proportions for normal, heavyweight and mass concrete, Farmington Hills: American Concrete Institute, USA.
  3. ACI 352R-02 (Reapproved 2010), Joint ACI-ASCE Committee 352 Report, Recommendations for design of beam-column connections in monolithic reinforced concrete structures, Farmington Hills: American Concrete Institute, USA.
  4. Aïtcin, P.C. (1998), High Performance Concrete, E&FN Spon, London.
  5. Bajaj, V., Singh, S.P., Singh, A.P. and Kaushik, S.K. (2012), "Flexural fatigue analysis of hybrid fibre-reinforced concrete", Mag. Concrete Res., 64(4), 361-373. https://doi.org/10.1680/macr.10.00109
  6. Canbolat, B.B. and Wight, J.K. (2008), "Experimental investigation on seismic behaviour of eccentric reinforced concrete beam-column-slab connections", ACI Struct. J., 105(2), 154-162.
  7. Durrani, A.J. and Wight, J.K. (1987), "Earthquake resistance of connections including slabs", ACI Struct. J., 85(5), 400-406.
  8. Ehsani, M. and Wight, J.K. (1985), "Effect of transverse beams and slab on beam-to-column connections", ACI J., 82(2), 188-195.
  9. Ganesan, N., Bharati, R. and Shashikala, A.P. (2013a), "Behavior of self-consolidating rubberized concrete beam-column joints", ACI Mater. J., 110(64), 697-704.
  10. Ganesan, N., Indira, P.V. and Anjana, S. (2013b), "Engineering properties of steel fibre reinforced geopolymer concrete", Adv. Concrete Constr., 1(4), 305-318. https://doi.org/10.12989/acc2013.1.4.305
  11. Ganesan, N., Indira, P.V. and Anjana, S. (2014a), "Bond behaviour of reinforcing bars embedded in steel fibre reinforced geopolymer concrete", Mag. Concrete Res., 67(1), 9-16. https://doi.org/10.1680/macr.14.00125
  12. Ganesan, N., Indira, P.V. and Ruby, A. (2007), "Steel fibre reinforced high performance concrete beam-column joints subjected to cyclic loading", ISET J Earthq Technol, 44, 445-456.
  13. Ganesan, N., Indira, P.V. and Sabeena, M.V. (2013c), "Tension stiffening and cracking of hybrid fiber-reinforced concrete", ACI Mater. J., 110(66), 715-722.
  14. Ganesan, N., Indira, P.V. and Sabeena, M.V. (2014b), "Behaviour of hybrid fibre reinforced concrete beam-column joints under reverse cyclic loads", Mater. Des., 54, 686-693 https://doi.org/10.1016/j.matdes.2013.08.076
  15. Ganesan, N., Indira, P.V. and Seena, P. (2014c), "High performance fibre reinforced cement concrete slender structural walls", Adv. Concrete Constr., 2(4), 309-324. https://doi.org/10.12989/acc.2014.2.4.309
  16. Ha,G.J. and Cho, C.G. (2008), "Strengthening of reinforced high-strength concrete beam-column joints using advanced reinforcement details", Mag. Concrete Res., 60(7), 487-497. https://doi.org/10.1680/macr.2008.60.7.487
  17. Hanson, N.W. and Conner, H.W. (1967), "Seismic resistance of reinforced concrete beam-column joints", Proceedings ASCE, 93, 533-560.
  18. Henager, C.H. and Doherty, T.J. (1976), "Analysis of reinforced fibrous concrete beams", J. Struct. Dv., 102(1), 177-188.
  19. IS 1489 (Part I) (1991), Portland pozzolona cement specifications, Part I, Fly ash based, Bureau of Indian Standards, New Delhi.
  20. IS 383 (1970), Specification for coarse and fine aggregates from natural sources for concrete, Bureau of Indian Standards, New Delhi. (reaffirmed 2002)
  21. Joyklad, P., Pimanmas, A. and Dhakal, R.P. (2012), "Cyclic performance of beam-column joints with extended column fixed at base. Part I: experimental investigation", Mag. Concrete Res., 64(9), 807-825. https://doi.org/10.1680/macr.11.00083
  22. Kim, J., LaFave, J.M. and Song, J. (2009), "Joint shear behaviour of reinforced concrete beam-column connections", Mag. Concrete Res., 61(92), 119-132. https://doi.org/10.1680/macr.2008.00068
  23. Naaman, A.E. and Reinhardt, H.W. (2004), "High performance fiber reinforced cement composites HPFRCC-4", Cement Concrete Compos., 26, 757-759. https://doi.org/10.1016/j.cemconcomp.2003.09.001
  24. Li, B., Lam, E.S.S., Wu, B. and Wang, Y.Y. (2015), "Seismic behavior of reinforced concrete exterior beam-column joints strengthened by ferrocement composites", Earthq. Struct., 9(1), 223-256.
  25. Pantazopoulou, S. and French, C.W. (2001), "Slab participation in practical earthquake design of reinforced concrete frames", ACI Struct. J., 98(4), 1-11.
  26. Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons, NewYork.
  27. Priti, A.P., Atul, K.D. and Jatin, A.D. (2013), "Evaluation of RC and SFRC exterior beam-column joint under cyclic loading for reduction in lateral reinforcement of the joint region", Mag. Concrete Res., 65(7), 405-414. https://doi.org/10.1680/macr.12.00078
  28. Rajagopal, S., Prabavathy, S. and Kang, T.H.K. (2014), "Seismic behavior evaluation of exterior beam-column joints with headed or hooked bars using nonlinear finite element analysis", Earthq. Struct., 7(5), 861-875. https://doi.org/10.12989/eas.2014.7.5.861
  29. Shin, M. and LaFave, J.M. (2004), "Reinforced concrete edge beam-column-slab connections subjected to earthquake loading", Mag. Concrete Res., 55(6), 273-291.
  30. Sukontasukkul, P. (2004), "Tensile behaviour of hybrid fibre-reinforced concrete", Adv. Cement Res., 16(3), 115-122. https://doi.org/10.1680/adcr.2004.16.3.115
  31. Yan, L., Xing, Y.M. and Li, J.J. (2012), "High-temperature mechanical properties and microscopic analysis of hybrid-fibre-reinforced high-performance concrete", Mag. Concrete Res., 65(3), 139-147. https://doi.org/10.1680/macr.12.00034

Cited by

  1. Spatial nonlinear simulation analysis of progressive collapse resistance of R.C. frame structure under different seismic precautionary vol.34, pp.2, 2015, https://doi.org/10.3233/jifs-169395
  2. Flexural strengthening of RC one way solid slab with Strain Hardening Cementitious Composites (SHCC) vol.9, pp.5, 2020, https://doi.org/10.12989/acc.2020.9.5.511