Abstract
Physical characteristics of aggregates affect the workability and strength of mortar and concrete, which include their fineness ratio, particle size distribution and water absorption. The workability of construction materials decreases if the incorporated fine aggregates show improper size distribution of their particles. This study shows the particle size effect on the rheological behavior of mortar and provides basic information for evaluating its workability. A mini-slump flow test was adopted to evaluate the workability of mortar. In addition, its plastic viscosity and yield stress were measured using a rheometer for building materials. The sand samples were prepared by sieving river sand and sorting out with their particle sizes. As a result, it was observed that the fines less than 0.7 mm increases the yield stress and plastic viscosity of the mortar samples. If the fines are less than 0.34 mm, the water absorption of the fines dominates change on the workability.
콘크리트, 모르타르 등 건설재료의 강도와 작업성은 구성하는 잔골재의 조립률, 입자 크기, 흡수율 등의 물리적 특성에 영향을 받는다. 특히, 잔골재의 입자 크기와 그에 따른 입도 분포는 시공 품질을 좌우하는 건설재료의 작업성을 결정한다. 최근 들어 건설현장에서는 천연모래의 수급 불안정으로 다양한 종류의 잔골재를 사용하고 있는데, 잔골재의 입자 크기에 대한 검증 없이 사용하는 경우 건설재료의 품질 저하 문제가 빈번히 발생하고 있다. 이 논문에서는 잔골재의 입자 크기가 모르타르의 레올로지 거동에 미치는 영향을 분석하여 건설재료의 작업성 평가에 대한 기초 자료를 제공하고자 한다. 모르타르의 작업성 평가를 위해서는 일반적으로 많이 사용하는 미니 슬럼프 플로 시험과 건설재료용 레오미터를 이용하여 레올로지 특성, 즉 항복응력과 소성점도를 측정하였다. 사용한 샘플은 일반 모래에 대한 체가름 시험을 통해 입자 크기에 따라 분류한 11가지 종류의 모래를 동일한 배합비로 모르타르를 제조하여 사용하였다. 실험결과 입자 크기가 0.7 mm 이하로 작아질수록 모르타르의 항복응력과 소성점도가 점진적으로 증가하였다. 입자 크기가 0.34 mm 이하로 작아지면 모래 입자의 흡수율에 따른 영향이 커짐을 확인하였고, 흡수율만큼 배합수를 증가시키면 이에 대한 영향을 제거할 수 있었다. 따라서 0.34 mm 잔분에 대한 흡수율 보정은 건설재료의 작업성 관리에 매우 중요함을 확인하였다.