Geomechanics and Engineering

  • 제9권5호
  • /
  • Pages.601-618
  • /
  • 2015
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Sand-Nonwoven geotextile interfaces shear strength by direct shear and simple shear tests

  • 투고 : 2014.02.12
  • 심사 : 2015.05.08
  • 발행 : 2015.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

Soil-reinforcement interaction mechanism is an important issue in the design of geosynthetic reinforced soil structures. This mechanism depends on the soil properties, reinforcement characteristics and interaction between these two elements (soil and reinforcement). In this work the shear strength of sand/geotextile interfaces were characterized through direct and simple shear tests. The direct shear tests were performed on a conventional direct shear device and on a large scale direct shear apparatus. Unreinforced sand and one layer reinforced sand specimens were characterized trough simple shear tests. The interfaces shear strength achieved with the large scale direct shear device were slightly larger than those obtained with the conventional direct shear apparatus. Notwithstanding the differences between the shear strength characterization through simple shear and direct shear tests, it was concluded that the shear strength of one layer reinforced sand is similar to the sand/geotextile interface direct shear strength.

키워드

참고문헌

  1. Anubhav and Basudhar, P.K. (2010), "Modeling of soil-woven geotextile interface behavior from direct shear test results", Geotext. Geomembr., 28(4), 403-408. https://doi.org/10.1016/j.geotexmem.2009.12.005
  2. ASTM D 5321-02 (2002), Standard test method for determining the coefficient of soil and geosynthetic or geosynthetic and geosynthetic friction by the direct shear method, American Society for Testing Materials; USA.
  3. Cazzuffi, D., Picarelli, L., Ricciuti, A. and Rimoldi, P. (1993), "Laboratory investigations on the shear strength of geogrid reinforced soils", Geosynth. Soil Reinf. Test. Procedures, ASTM STP 1190, PA, USA.
  4. Deb, K. and Konai, S. (2014), "Bearing capacity of geotextile-reinforced sand with varying fine fraction", Geomech. Eng., Int. J., 6(1), 33-45. https://doi.org/10.12989/gae.2014.6.1.033
  5. EN ISO 12957-1 (2005), Geosynthetics - Determination of the friction characteristics - Part 1: Direct shear test, CEN - TC 189, 11 p.
  6. Esmaili, D., Hatami, K. and Miller, G.A. (2014), "Influence of matric suction on geotextile reinforcementmarginal soil interface strength", Geotext. Geomembr., 42(2), 139-153. https://doi.org/10.1016/j.geotexmem.2014.01.005
  7. Evgin, E. and Fakharian, K. (1998), "Cyclic rotational simple- shear behaviour of sand-steel interfaces", Soil. Found., 38(2), 191-199. https://doi.org/10.3208/sandf.38.2_191
  8. Hatami, K. and Esmaili, D. (2015), "Unsaturated soil-woven geotextile interface strength properties from small-scale pullout and interface tests", Geosynth. Int., 22(2), 161-172. https://doi.org/10.1680/gein.15.00002
  9. Hsieh, C. and Hsieh, M.-W. (2003), "Load plate rigidity and scale effects on the frictional behavior of sand/geomembrane interfaces", Geotext. Geomembr., 21(1), 25-47. https://doi.org/10.1016/S0266-1144(02)00034-1
  10. Hsieh, C., Chen, G.H. and Wu, J.-H. (2011), "The shear behavior obtained from the direct shear and pullout tests for different poor grades soil-geosynthetic systems", J. GeoEng., 6(1), 15-26.
  11. Khoury, C.N., Miller, G.A. and Hatami, K. (2011), "Unsaturated soil-geotextile interface behavior", Geotext. Geomembr., 29(1), 17-28. https://doi.org/10.1016/j.geotexmem.2010.06.009
  12. Lee, K.M. and Manjunath, V.R. (2000), "Soil-geotextile interface friction by direct shear tests", Can. Geotech. J., 37(1), 238-252. https://doi.org/10.1139/t99-124
  13. Ling, H.I., Burke, C., Mohri, Y. and Matsushima, K. (2002), "Shear strength parameters of soil-geosynthetic interfaces under low confining pressure using a tilting table", Geosynth. Int., 9(4), 373-380. https://doi.org/10.1680/gein.9.0223
  14. Liu, C.-N., Zornberg, J.G., Chen, T.-C., Ho, Y.-H. and Lin, B.-H. (2009), "Behavior of geogrid-sand interface in direct shear mode", J. Geotech. Geoenviron. Eng., 135(12), 1863-1871. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000150
  15. Oumarou, T.A. and Evgin, E. (2005), "Cyclic behaviour of a sand steel plate interface", Can. Geotech. J., 42(6), 1695-1704. https://doi.org/10.1139/t05-083
  16. Palmeira, E.M. (1988), "Discussion on direct shear tests on reinforced sand", Geotechnique, 38(1), 146-148.
  17. Silvano, R.P.S.X. and Lopes, M.L. (2005), "Soil/geosynthetic interface characterization trough direct shear tests", Proceedings of the 6th International Conference on Ground Improvement Techniques, Coimbra, Portugal, pp. 555-560.
  18. Terzaghi, K., Peck, R.B. and Mesri, G. (1996), Soil Mechanics in Engineering Practice, John Wiley & Sons.
  19. Uesugi, K. and Kishida, H. (1986), "Fricional resistance at yield between dry sand and mild steel", Soil. Found., 26(4), 139-149. https://doi.org/10.3208/sandf1972.26.4_139
  20. Vieira, C.S. (2008), "Geosynthetic reinforced soil retaining walls and slopes. Seismic behaviour and design methodologies", Ph.D. Thesis; Civil Engineering Department, University of Porto, 575 p. [In Portuguese]
  21. Vieira, C.S., Lopes, M.L. and Caldeira, L.M. (2011), "Numerical modelling of a geosynthetic reinforced steep slope subjected to seismic loading", ECCOMAS Thematic Conference - COMPDYN 2011: 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Corfu, Greece, May.
  22. Vieira, C.S., Lopes, M.L. and Caldeira, L.M. (2013), "Sand-geotextile interface characterisation through monotonic and cyclic direct shear tests", Geosynth. Int., 20(1), 26-38. https://doi.org/10.1680/gein.12.00037
  23. Zarnani, S., El-Emam, M.M. and Bathurst, R.J. (2011), "Comparison of numerical and analytical solutions for reinforced soil wall shaking table tests", Geomech. Eng., Int. J., 3(4), 291-321. https://doi.org/10.12989/gae.2011.3.4.291

피인용 문헌

  1. Microstructural investigation on mechanical behavior of soil-geosynthetic interface in direct shear test vol.45, pp.3, 2017, https://doi.org/10.1016/j.geotexmem.2017.02.001
  2. Recycled Construction and Demolition Wastes as filling material for geosynthetic reinforced structures. Interface properties vol.124, 2016, https://doi.org/10.1016/j.jclepro.2016.02.115
  3. Influence of particle shape on the shear strength and dilation of sand-woven geotextile interfaces vol.45, pp.1, 2017, https://doi.org/10.1016/j.geotexmem.2016.07.005
  4. Full-scale investigations into installation damage of nonwoven geotextiles vol.17, pp.1, 2015, https://doi.org/10.12989/gae.2019.17.1.081
  5. The Influence of Compaction and Water Conditions on Shear Strength and Friction Resistance between Geotextiles and Ash-Slag Mixture vol.13, pp.5, 2020, https://doi.org/10.3390/en13051086
  6. Evaluating aqaba marine sand geotextile interface shear strength vol.14, pp.5, 2015, https://doi.org/10.1080/19386362.2019.1651985
  7. Global and local sand-geosynthetic interface behaviour vol.71, pp.4, 2015, https://doi.org/10.1680/jgeot.19.p.109
  8. Experimental investigation of interface behaviour between different types of sand and carbon fibre polymer vol.25, pp.13, 2015, https://doi.org/10.1080/19648189.2019.1626290