References
- J. H. Lee, "After-treatment System Technologies for Light-Duty Vehicles", Auto Journal of KSAE, Vol. 35 No. 9, 2013, pp. 22-26.
-
W. S. Kim, "Considering a step-by-step management diesel vehicle emission characteristics (PM and
$NO_x$ ) in Seoul", Seoul institute of policy report, No. 140, 2013, pp. 1-20. - Y. M. Woo, Y. J. Lee, Y. Y. Kim, J. H. Kim, B. D. Min, "Effects of Spray Characteristics on the Performance of DI Diesel Engine", Journal KSAE 30th anniversary conference, 2008, pp. 305-310.
- S. H. Kwon, M. S. Kim, M. S. Choi, S. H. Jo, "Combustion Optimization of Diesel 2.0 Liter Class Engine with 8-hole Injector Nozzle", Journal of KSAE, Vol. 16, No. 3, 2008, pp. 73-79.
- J. H. Lee, S. J. Kim, "Modeling the Effects of Injection Conditions and Combustion Chamber Geometry on Emissions in a HSDI Diesel Engine", Journal of KSME other publications, 2002, pp. 2337-2342.
- L. W. Su, X. R. Li, Z. Zhang, F. S. Liu, "Numerical analysis on the combustion and emission characteristics of forced swirl combustion system for DI diesel engines", Energy Conversion and Management, Vol. 86, 2014, pp. 20-27. https://doi.org/10.1016/j.enconman.2014.05.023
- C. P. Abdul Gafoor, G. Rajesh, "Numerical investigation of piston bowl geometry and swirl ratio on emission from diesel engines", Energy Conversion and Management, Vol. 101, 2015, pp. 541-551. https://doi.org/10.1016/j.enconman.2015.06.007
- B. W. Ryu, H. J. Kim, C. S. Lee, "Prediction of the Effect of Injection Strategy on the Combustion and Emission Characteristics in a Direct Injection Diesel Engine", Journal KSAE 30th anniversary conference, 2008, pp. 427-432.
- M. S. Chon, "Effect of Nozzle Hole Number on Fuel Spray and Emission Characteristics of High Pressure Diesel Injector", Journal of Ilass-Korea, Vol. 17, No. 4, 2012.
- Fire version 2013 ESE-Diesel (Engine Simulation Environment) Module Manual, AVL List GmbH, 2012.
- Fire version 2013 Combustion Module Manual AVL GmbH, 2013.
- W. Bosch, "The Fuel Rate Indicator : A New Measuring Instrument for Display of the Characteristics of Individual Injection", SAE 660749, 1966.