DOI QR코드

DOI QR Code

Modeling and Analysis of a Ray Tracing Method for Non-Destructive Testing for Internal Defects

광선추적법을 이용한 비파괴 내부 결함 모델 및 해석

  • Kim, Teak Gu (Graduate School of NID Fusion Technology, Seoul National University of Science and Technology) ;
  • Kim, Joohan (Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology)
  • 김택구 (서울과학기술대학교 NID융합기술대학원) ;
  • 김주한 (서울과학기술대학교 기계.자동차공학과)
  • Received : 2014.10.10
  • Accepted : 2014.12.02
  • Published : 2015.01.01

Abstract

Modeling and analysis using a ray tracing method for internal defects were described. Reflection and refraction of rays on the interface of defects were modeled using the Harvey model and the Lambertian model. The diffraction on the interface of defects affected the incoming signals and it could evaluate any defects in the matter and its signal would be analyzed with the ray tracing simulation. The simulation results were compared with actual detecting signals and the ray tracing model was shown in good agreement with experimental data. This method has a possibility to be used as wave propagation modeling in non-destructive testing.

Keywords

References

  1. Kwon, S. J., Lee, D. H., Seo, J. W., and Kim, J. C., "Evaluation of Non Destructive Inspection Interval for Running Safety of Railway Axle," J. Korean Soc. Precis. Eng., Vol. 31, No. 9, pp. 777-782, 2014. https://doi.org/10.7736/KSPE.2014.31.9.777
  2. Mouritz, A. P., Townsend, C., and Shah Khan, M. Z., "Non-destructive Detection of Fatigue Damage in Thick Composites by Pulse-Echo Ultrasonics," Composites Science and Technology, Vol. 60, No. 1, pp. 23-32, 2000. https://doi.org/10.1016/S0266-3538(99)00094-9
  3. Lee, J. S., Park, I. K., and Lee, H. M., "Wavelet Analysis of Ultrasonic Echo Waveform and its Application for Nondestructive Evaluation," Proc. of Korean Society for Non-destructive Testing, pp. 39-47, 1998.
  4. Achenbach, J. D. and Gautesen, A. K., "Geometrical Theory of Diffraction for Three-D Elastodynamics," Journal of the Acoustical Society of America, Vol. 61, No. 2, pp. 413-421, 1977. https://doi.org/10.1121/1.381332
  5. Kishore, N. N., Sridhar, I., and Iyengar, N. G. R., "Finite Element Modeling of the Scattering of Ultrasonic Waves by Isolated Flaw," NDT & E International, Vol. 33, No. 5, pp. 297-305, 2000. https://doi.org/10.1016/S0963-8695(99)00054-7
  6. Bostrom, A. and Bovik, P., "Ultrasonic Scattering by a Side-drilled Hole," International Journal of Solids and Structures, Vol. 40, No. 13, pp. 3493-3505, 2003. https://doi.org/10.1016/S0020-7683(03)00150-1
  7. Rodriguez, M. A., San Emeterio, J. L., Lazaro, J. C., and Ramos, A., "Ultrasonic Flaw Detection in NDE of Highly Scattering Materials using Wavelet and Wigner-Ville Transform Processing," Ultrasonics, Vol. 42, No. 1, pp. 847-851, 2004. https://doi.org/10.1016/j.ultras.2004.01.063
  8. Yamada, H., Fukutomi, H., Lin, S., and Ogata, T., "Prediction of B Scope Images for Ultrasonic Testing by Geometrical Theory of Diffracion," Proc. of the 35thAnnual Review of Progress in Quantitative Nondestructive Evaluation, AIP Publishing, pp. 65-72, 2009.
  9. Lin, S., Tamata, H., Fukutomi, H., and Ogata, T., "Prediction of Received Signals in Ultrasonic Testing by Finite Element Method Combined with Geometrical Optics Theory," Proc. of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation, AIP Publishing, pp. 57-64, 2009.
  10. Kotha, A. and Harvey, J. E., "Scattering Effects of Machined Optical Surfaces," Proc. of SPIE, Vol. 2541, pp. 54-65, 1995.
  11. Bubb, D. M., Yi, S., Kuchmek, J., Corgan, J., and Papantonakis, M., "Laser Processing of Poly (methyl methacrylate) Lambertian Diffusers," Applied Surface Science, Vol. 257, No. 1, pp. 22-24, 2010. https://doi.org/10.1016/j.apsusc.2010.06.015
  12. Kishore, N., Sridhar, I., and Iyengar, N., "Finite Element Modelling of the Scattering of Ultrasonic Waves by Isolated Flaws," NDT & E International, Vol. 33, No. 5, pp. 297-305, 2000. https://doi.org/10.1016/S0963-8695(99)00054-7
  13. Li, C.-J., Fang, Y.-C., and Cheng, M.-C., "Prism-Pattern Design of an LCD Light Guide Plate using a Neural-Network Optical Model," Optik-International Journal for Light and Electron Optics, Vol. 121, No. 24, pp. 2245-2249, 2010. https://doi.org/10.1016/j.ijleo.2009.09.007