Computers and Concrete

  • 제16권6호
  • /
  • Pages.825-846
  • /
  • 2015
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Shear performance assessment of steel fiber reinforced-prestressed concrete members

  • Hwang, Jin-Ha (Department of Architectural Engineering, University of Seoul) ;
  • Lee, Deuck Hang (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign) ;
  • Park, Min Kook (Department of Architectural Engineering, University of Seoul) ;
  • Choi, Seung-Ho (Department of Architectural Engineering, University of Seoul) ;
  • Kim, Kang Su (Department of Architectural Engineering, University of Seoul) ;
  • Pan, Zuanfeng (Department of Building Engineering, Tongji University)
  • 투고 : 2015.07.01
  • 심사 : 2015.11.16
  • 발행 : 2015.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, shear tests on steel fiber reinforced-prestressed concrete (SFR-PSC) members were conducted with test parameters of the concrete compressive strength, the volume fraction of steel fibers, and the level of effective prestress. The SFR-PSC members showed higher shear strengths and stiffness after diagonal cracking compared to the conventional prestressed concrete (PSC) members without steel fibers. In addition, their shear deformational behavior was measured using the image-based non-contact displacement measurement system, which was then compared to the results of nonlinear finite element analyses (NLFEA). In the NLFEA proposed in this study, a bi-axial tensile behavior model, which can reflect the tensile behavior of the steel fiber-reinforced concrete (SFRC) in a simple manner, was introduced into the smeared crack truss model. The NLFEA model proposed in this study provided a good estimation of shear behavior of the SFRPSC members, such as the stiffness, strengths, and failure modes, reflecting the effect of the key influential factors.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea

참고문헌

  1. ACI Committee 318 (2008), Building code requirements for structural concrete (ACI 318M-08) and Commentary, American Concrete Institute, Farmington Hills.
  2. ACI Committee 544 (1988), Design consideration for steel fiber reinforced concrete (ACI 544.4R-88), ACI Struct. J., 85(5), 563-580.
  3. Adebar, P. and Collins, M.P. (1996), "Shear strength of members without transverse reinforcement", Can. J. Civil Eng., 23(1), 30-41. https://doi.org/10.1139/l96-004
  4. Au, F.T.K., Leung, C.C.Y. and Kwan, A.K.H. (2011), "Flexural ductility and deformability of reinforced and prestressed concrete sections", Comput. Concrete, 8(4), 473-489. https://doi.org/10.12989/cac.2011.8.4.473
  5. Avendano, A.R. and Bayrak, O. (2011), "Efficient shear reinforcement design limits for prestressed concrete beams", ACI Struct. J., 108(6), 689-697.
  6. CEB-FIP (1978), Model code for concrete structures, CEB-FIP International Recommendations, 3rd Edition, Comite Euro-International du Beton, Paris.
  7. Fib draft Model Code (2012), Model Code 2010- fib Bulletin No. 65. Final draft
  8. Campione, G. (2014), "Flexural and shear resistance of steel fiber-reinforced lightweight concrete beams", J. Struct. Eng., 140(4).
  9. Classen, M. and Dressen, T. (2015), "Experimental investigations on prestressed concrete beams with Openings", ACI Struct. J., 112(2), 221-232.
  10. Choi, K.K., Park, H.G. and Wight, J.K. (2007), "Shear strength of steel fiber-reinforced concrete beams without web reinforcement", ACI Struct. J., 104(1), 12-21.
  11. Colajanni, P., Recupero, A. and Spinella, N. (2014), "Design procedure for prestressed concrete beams", Comput. Concrete, 13(2), 235-253. https://doi.org/10.12989/cac.2014.13.2.235
  12. Colajanni, P., Recupero, A. and Spinella, N. (2012), "Generalization of shear truss model to the case of SFRC beams with stirrups", Comput. Concrete, 9(3), 227-244. https://doi.org/10.12989/cac.2012.9.3.227
  13. Collins, M.P. and Mitchell, D. (1991), Prestressed concrete structures, Prentice-Hall.
  14. Dinh, H.H., Parra-Montesinos, G.J. and Wight, J.K. (2010), "Shear behavior of steel fiber-reinforced concrete beams without stirrup reinforcement", ACI Struct. J., 107(5), 597-606.
  15. Dupont, D. and Vandewalle, L. (2003), "Calculation of crack widths with the s-e method", Test and design methods for steel fibre reinforced concrete: background and experiences-Proceedings of the RILEM TC162-TDF Workshop, RILEM Technical Committee 162-TDF, Bochum, Germany, 119-144.
  16. ENV 1992-1-1 (1991), Eurocode 2: design of concrete structures - Part 1.1: General rules and rules for buildings.
  17. Furlan Jr., S. and Hanai, J.B. (1999), "Prestressed fiber reinforced concrete beams with reduced ratios of shear reinforcement", Cement Concrete Comp., 21(3), 213-221. https://doi.org/10.1016/S0958-9465(98)00054-7
  18. Hognestad, E. (1951), A study of combined bending and axial load in rein forced concrete members, University of Illinois Engineering Experimental Station, Bulletin Series No. 399
  19. Hsu, T.T.C. and Zhang, L. (1996), "Tension stiffening in reinforced concrete membrane elements", ACI Struct. J., 93(1), 108-115.
  20. Ju, H., Lee, D.H., Hwang, J.H., Kang, J.W., Kim, K.S. and Oh, Y.H. (2012), "Torsional behavior model of steel-fiber-reinforced concrete members modifying fixed-angle softened-truss model", Compos. Part B Eng., 45(1), 215-231.
  21. Jung, S. and Kim, K.S. (2008), "Knowledge-based prediction of shear strength of concrete beams without shear reinforcement", Eng. Struct., 30(6), 1515-1525. https://doi.org/10.1016/j.engstruct.2007.10.008
  22. Kim, K.S. and Lee, D.H. (2012), "Flexural behavior model for post-tensioned concrete members with unbonded tendons", Comput. Concrete, 10(3), 241-258. https://doi.org/10.12989/cac.2012.10.3.241
  23. Kim, K.S., Lee, D.H., Hwang, J.H. and Kuchma, D.A. (2012), "Shear behavior model for steel fiberreinforced concrete members without transverse reinforcements", Compos. Part B: Eng., 43(5), 2324-2334. https://doi.org/10.1016/j.compositesb.2011.11.064
  24. Kim, K.S. and Lee, D.H. (2012), "Nonlinear analysis method for continuous posttensioned concrete members with unbonded tendons", Eng. Struct., 40(1), 487-500. https://doi.org/10.1016/j.engstruct.2012.03.021
  25. Lee, D.H. and Kim, K.S. (2011), "Flexural strength of prestressed concrete members with unbonded tendons", Struct. Eng. Mech., 38(5), 675-696. https://doi.org/10.12989/sem.2011.38.5.675
  26. Lee, D.H., Hwang, J.H., Ju, H.J. and Kim, K.S. (2014), "Application of direct tension force transfer model with modified fixed-angle softened-truss model to finite element analysis of steel fiber-reinforced concrete members subjected to shear", Comput. Concrete, 13(1), 49-70. https://doi.org/10.12989/cac.2014.13.1.049
  27. Lee, D.H., Hwang, J.H., Ju, H., Kim, K.S. and Kuchma, D.A. (2012), "Nonlinear finite element analysis of steel fiber-reinforced concrete members using direct tension force transfer model", Finite Elem. Anal. Des., 50(1), 266-286. https://doi.org/10.1016/j.finel.2011.10.004
  28. Lee, S.C., Cho, J.Y. and Vecchio, F.J. (2011a), "Diverse embedment model for steel fiber-reinforced concrete in tension: model development", ACI Mater. J., 108(5), 516-525.
  29. Lee, S.C., Cho, J.Y. and Vecchio, F.J. (2011b), "Diverse embedment model for steel fiber-reinforced concrete in tension: model verification", ACI Mater. J. 108(5), 526-535.
  30. Lee, S.C., Cho, J.Y. and Vecchio, F.J. (2013), "Tension-stiffening model for steel fiber-reinforced concrete containing conventional reinforcement", ACI Struct. J., 110(4), 639-648.
  31. Lim, T.Y., Paramsivam, P. and Lee, S.L. (1987), "Analytical model for tensile behavior of steel-fiber concrete", ACI Mater. J., 84(4), 286-298.
  32. Mattock, A.H. (1979), "Flexural strength of prestressed concrete sections by programmable calculator," PCI J., 24(1), 32-54.
  33. Minelli, F. and Plizzari, G.A. (2010), "Shear strength of FRC members with little or no shear reinforcement: a new analytical model", fib Bulletin, 57(1), 211-226.
  34. Narayanan, R. and Darwish, Y. (1987), "Shear in prestressed concrete beams containing steel fibres", Int. J. Cement Comp. Lightweight Concrete, 9(2), 81-90. https://doi.org/10.1016/0262-5075(87)90023-6
  35. Nataraja, M.C., Dhang, N. and Gupta, A.P. (1999), "Stress-strain curves for steel-fiber reinforced concrete under compression", Cement Concrete Comp., 21(5), 383-390. https://doi.org/10.1016/S0958-9465(99)00021-9
  36. Padmarajaiah, S.K. and Ramaswamy, A. (2001), "Behavior of fiber-reinforced prestressed and reinforced high-strength concrete beams subjected to shear", ACI Struct. J., 98(5), 752-761.
  37. Padmarajaiah, S.K. and Ramaswamy, A. (2004), "Flexural strength predictions of steel fiber reinforced highstrength concrete in fully-partially prestressed beam specimens", Cement Concrete Comp., 26(4), 275-290. https://doi.org/10.1016/S0958-9465(02)00121-X
  38. Rahai, A. and Shokoohfar A. (2012), "Nonlinear shear strength of pre-stressed concrete beams", Struct. Eng. Mech., 41(4), 441-458. https://doi.org/10.12989/sem.2012.41.4.441
  39. Spinella, N., Colajanni, P. and La Mendola, L. (2012), "Nonlinear analysis of beams reinforced in shear with stirrups and steel fibers", ACI Struct. J., 109(1), 53-64.
  40. Susetyo, J. (2009), "Fibre reinforcement for shrinkage crack control in prestressed, precast segmental bridges", Ph.D dissertation, University of Toronto.
  41. Tan, K.H. and Mansur, M.A. (1990), "Shear transfer in reinforced fiber concrete", J. Mater. Civil Eng., 2(4), 202-214. https://doi.org/10.1061/(ASCE)0899-1561(1990)2:4(202)
  42. Tan, K.H., Murugappan, K. and Paramasivam, P. (1992), "Shear behavior of steel fiber reinforced concrete beams", ACI Struct. J., 89(6), 3-11.
  43. Tan, K.H., Paramasivam, P. and Murugappan, K. (1996), "Steel fibers as shear reinforcement in patially prestressed beams", ACI Struct. J., 92(6), 643-651.
  44. Thomas, J. and Ramaswamy, A. (2006), "Shear strength of prestressed concrete T-beams with steel fibers over partial/full depth", ACI Struct. J., 103(3), 427-435.
  45. Vecchio, F.J. and Collins, M.P. (1986), "Modified compression field theory for reinforced concrete elements subjected to shear", ACI J. Proc., 83(2), 219-231.
  46. Vecchio, F.J. and Wong, P. (2002), "Vector2 and formworks manual", Publication No. 2002-02, Dept. Civil Eng. Pub., University of Toronto, Toronto, ON, Canada.
  47. Voo, J.Y.L. and Foster, S.J. (2003), "Variable engagement model for fibre reinforced concrete in tension", UNICIV Report No. R-420 June 2003, University of New SouthWales, Sydney, Australia.

피인용 문헌

  1. Shear Deformation of Steel Fiber-Reinforced Prestressed Concrete Beams vol.10, pp.S3, 2016, https://doi.org/10.1007/s40069-016-0159-2
  2. Buckling analysis of embedded concrete columns armed with carbon nanotubes vol.17, pp.5, 2016, https://doi.org/10.12989/cac.2016.17.5.567
  3. Mechanical properties of SFRHSC with metakaolin and ground pumice: Experimental and predictive study vol.23, pp.5, 2015, https://doi.org/10.12989/scs.2017.23.5.543
  4. Contribution of steel fiber as reinforcement to the properties of cement-based concrete: A review vol.20, pp.2, 2015, https://doi.org/10.12989/cac.2017.20.2.155
  5. Unified equivalent frame method for post-tensioned flat plate slab structures vol.20, pp.6, 2015, https://doi.org/10.12989/cac.2017.20.6.663
  6. Experimental Study on Shear Capacity of Reinforced Concrete Beams with Corroded Longitudinal Reinforcement vol.12, pp.5, 2015, https://doi.org/10.3390/ma12050837
  7. Shear strength model for prestressed concrete beams with steel fibres failed in shear vol.73, pp.14, 2015, https://doi.org/10.1680/jmacr.19.00391