DOI QR코드

DOI QR Code

Studies on Deinking Properties of Recovered Paper for Manufacturing Eco-friendly Thermal Recording Paper

친환경 감열기록지 생산을 위한 순환제지자원의 탈묵 특성 연구

  • Lee, Tai Ju (Changgang Institute of Paper Science and Technology) ;
  • Choi, Do Chim (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Kim, Moon Sung (Daehan Paper) ;
  • Ryu, Jeong Yong (Changgang Institute of Paper Science and Technology)
  • 이태주 (창강제지기술연구소) ;
  • 최도침 (강원대학교 산림환경과학대학 제지공학과) ;
  • 김문성 ((주)대한제지) ;
  • 류정용 (창강제지기술연구소)
  • Received : 2015.11.11
  • Accepted : 2015.12.12
  • Published : 2015.12.30

Abstract

Demands of thermal recording paper have been increased significantly by increase in usage of invoice, fax, and label. Thermal recording paper was mainly made based on virgin fiber. It is necessary to find a suitable alternative to virgin fiber in terms of environment protectional resources conservation. In this paper, deinking properties of different recovered papers were analyzed in order to use the recovered paper as raw material of thermal recording paper. Recovered paper were ONP, OMG and white ledger. Flotation reject of OMG was high because inorganic pigments in coating layer could be removed by upstream of froth. Brightness of white ledger and OMG were much higher than that of ONP. Therefore, properties of pulp made from the recovered paper could be enhanced with increase in blending ratio of white ledger and OMG. However, blending ratio of OMG caused the increase of flotation reject. Consequently, the optimum blending ratio of ONP, OMG, and white ledger was 3:3:3 for eco-friendly thermal recording paper. Under the condition, brightness was about 70% and ERIC was below 300 ppm.

Keywords

References

  1. Ko, Y. S., Preservation and characteristics of thermal recording paper, In Conservation of the Archives, Vol. 7, pp. 15-19 (2014).
  2. Laurijssena, J., Marsidib, M., Westenbroeka, A., Worrell, E., and Faaijc, A., Paper and biomass for energy?: The impact of paper recycling on energy and $CO_2$ emissions, Resour. Converv. Recy. 54(12):1208-1218 (2010). https://doi.org/10.1016/j.resconrec.2010.03.016
  3. McKinney, R. W. J., Technology of Paper Recycling, Springer, United Kingdom, pp. 296-297 (1995).
  4. Li, R. G., Xie, X. F., and Zhao, C. S., Study of flotation deinking efficiency of old newspaper and old magazine, Advanced Materials Research 295-297:2205-2209 (2011). https://doi.org/10.4028/www.scientific.net/AMR.295-297.2205
  5. Zhang, X., Renaud, S., and Paice, M., Cellulase deinking of fresh and aged recycled newsprint/magazines (ONP/OMG), Enzyme Micro. Tech. 43(2):103-108 (2008). https://doi.org/10.1016/j.enzmictec.2007.11.005
  6. Carre, B., Brun, J., and Galland, G., The incidence of the destabilization of the pulp suspension on the deposition of secondary stickies, Pulp and Paper Canada 99(7):T248-T252 (1998).
  7. Ryu, J. Y., Improvement of plybond strength of two-ply sheets by spraying starch blends, Master's Thesis, Seoul National University, Republic of Korea (1997).
  8. Shin, E. J., Choi, T. H., Song, B. K, Cho, B.- U., and Ryu, J. Y., A new deposit test method to evaluate potential white pitch deposit - Influence of pH and calcium hardness, Journal of Korea TAPPI 41(2):26-33 (2009).
  9. Miranda, R., Blanco, A., Negro, C., and Tijero, J., Stickies removal in a deinking line of a newprint mill: Efficiency of the different process stages, Cell. Chem. Tech. 40(9-10):775-782 (2006).