Elastomers and Composites

  • 제50권4호
  • /
  • Pages.297-303
  • /
  • 2015
  • /
  • 2092-9676(pISSN)
  • /
  • 2288-7725(eISSN)
한국고무학회 (The Rubber Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Thermal Decomposition of Ammonium Polyphosphate-Polyurethane Composite Foam Brown by H2O

  • Park, Kyeong-Kyu (Department of Chemical Engineering, Dong-A University) ;
  • Lee, Sang-Ho (Department of Chemical Engineering, Dong-A University)
  • 투고 : 2015.11.09
  • 심사 : 2015.11.19
  • 발행 : 2015.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Ammonium polyphosphate-polyurethane foam composite (APP-PUF) was prepared from poly(adipate)diol/ammonium polyphosphate composite (f = 2), polyether polyol (f = 4.6), and PMDI (f = 2.5). As a blowing agent, $H_2O$ was used at various concentrations. The thermal decomposition behavior, morphology, closed-cell content, and density of APP-PUF were characterized. At the $H_2O$ concentrations lower than 3.5 php, the cell size of pure polyurethane foams (PUF) and APP-PUFs were close each other. As the $H_2O$ concentration became greater than 5.0 php, the cell size of the PUFs greatly increased compared to that of APP-PUFs. Addition of 1.5~1.9 wt% ammonium polyphosphate to the PUFs greatly enhanced the thermal stability of the PUFs, so 50 wt% residual temperature of APP-PUFs increased to $380{\sim}488^{\circ}C$, which were $30{\sim}70^{\circ}C$ higher than those of the PUFs. Thermal stability of the PUFs and APP-PUFs increased with $H_2O$ content and then decreased once $H_2O$ content exceeded 5 php.

키워드

참고문헌

  1. I. Mihail, "Chemistry and Technology of Polyols for Polyurethanes", Rapra Technology Limited, United Kingdom, 2005.
  2. C. Ligourea, M. Cloitrea, C. Chateliera, and F. Montia, "Making polyurethane foams from microemulsions", Polymer, 46, 6402 (2005). https://doi.org/10.1016/j.polymer.2005.04.089
  3. M. Saha, M, kabir, and S. Jeelani, "Enhancement in thermal and mechanical properties of polyurethane foam infused with nanoparticle", Mat. Sci. Eng. A, 479, 213 (2008). https://doi.org/10.1016/j.msea.2007.06.060
  4. S. S. Kim and J. N. Park, "Industrial Application of Polyurethane" Polym. Sci. Tech., 10, 614 (1999).
  5. U. Jafelt and O. Ramnas, "New technology for cheaper district heating to single-family dwellings", The 10th International Symposium on District Heating and Cooling, September 3-5 (2006).
  6. M. Nayani, S. Gunashekar, and N. Abu-Zahra, "Synthesis and Characterization of Polyurethane-Nanoclay Composites", Int. J. Polym. Sci., 2013, 5 (2013).
  7. S. H. Kim, M. C. Lee, H. D. Kim, H. C. Park, H. M. Jeong, K. S. Yoon, and B. K. Kim, "Nanoclay reinforced rigid polyurethane foam", J. Appl. Polym. Sci., 117, 3764 (2006).
  8. S. W. Shin and S. H. Lee, "Synthesis and Thermal Degradation of Poly(oxydiethylene adipate urethane) Composites Containing Cloisite 30B and Melamine phosphate", Polymer (Korea), 36, 643 (2012). https://doi.org/10.7317/pk.2012.36.5.643
  9. S. Zhou, L. Wu, J. S, and W. Shen, "The change of the properties of acrylic-based polyurethane via addition of nano-silica", Prog. Org. Coat., 45, 33 (2002). https://doi.org/10.1016/S0300-9440(02)00085-1
  10. K. K. Park and S. H. Lee, "Synthesis of Polyurethane Foam/Organonanoclay/Phosphate Composites and its Characterization" Elast. Compos., 46, 343 (2011).
  11. K. K. Park and S. H. Lee, "Synthesis of Melamine Phosphate-Polyurethane Composite Foam Blown by Water and Characterization of Its Thermal Properties", Polym(Korea), 38, 441 (2014).
  12. M. Thirumal, D. Khastgir, G. B. Nando, Y. P. Naik, and N. K. Singha, "Halogen-free flame retardant PUF: Effect of melamine compounds on mechanical, thermal and flame retardant properties", Polym. Degrad. Stab., 95, 1138 (2010). https://doi.org/10.1016/j.polymdegradstab.2010.01.035
  13. Z. Tanga, M. M. Maroto-Valera, J. M. Andresena, J. W. Millerb, M. L. Listemann, P. L. McDaniel, D. K. Morita, and W. R. Furlan, "Thermal degradation behavior of rigid polyurethane foams prepared with different fire retardant concentrations and blowing agents", Polymer, 43, 6471 (2002). https://doi.org/10.1016/S0032-3861(02)00602-X
  14. L. Shufen, J. Zhi, Y. Kaijun, and Y. Shuqin, "Studies on the Thermal Behavior of Polyurethanes", Polym.-Plast. Technol. Eng., 45, 95 (2006). https://doi.org/10.1080/03602550500373634
  15. H. Singh, A. K. Jain, and T. P. Sharma, "Effect of Phosphorus-Nitrogen Additives on fire Retardancy of Rigid Polyurethane Foams", J. Appl. Polym. Sci., 109, 2718 (2008). https://doi.org/10.1002/app.28324
  16. D. Sophie, B. Michel, B. Serge, D. Rene, C. Giovanni, E. Berend, L. Chiris, R. Toon, and V. Herve, "Mechanism of Fire Retardancy of Polyurethanes Using Ammonium Polyphosphate", J. Appl. Plym. Sci., 82, 3262 (2001). https://doi.org/10.1002/app.2185
  17. S. Duquesnea, R. Delobela, M. Le Brasa, and G. Caminob, "A comparative study of the mechanism of action of ammonium polyphosphate and expandable graphite in polyurethane", Polym. Degrad. Stab., 77, 333 (2002). https://doi.org/10.1016/S0141-3910(02)00069-1