참고문헌
- J. W. Jung, H. S. Jeon, Y. S. Bae, 2001, "A Motion control of Hydraulic System using variable orifice", Korea ADAMS User Conference, Vol. 11, No. 8-9, pp. 1-8.
- Korea Research Council for Industrial Science and Technology, "Development of intelligent servo actuator for steam control of nuclear/thermal power plants", Korea Institute of Machinery and Materials.
- T. P. Brackbill and S. G. Kandlikar, 2007, "Effect of Sawtooth Roughness on Pressure Drop and Turbulent Transition in Microchannels", Heat Transfer Engineering, Vol. 28, No. 8-9, pp. 662-669. https://doi.org/10.1080/01457630701326290
- Korea Institute Of Nuclear Safety, 2013, "Thermal-Hydraulic Detailed Analysis inside Pipe and Tube by Using CFD Techniques", Annual Research Report.
- M. T. Islam and Y. W. Lee, 2007, "Effect of Aspect Ratio On Gas Microchannel Flow", Journal of The Korean Society for Power System Engineering, Vol. 11, No. 3, pp. 16-21.
- M. T. Islam and Y. W. Lee, 2009, "Influence of Aspect Ratio on Friction Characteristics in Rectangular Gas Microchannel Flow", Journal of The Korean Society for Power System Engineering, Vol. 13, No. 2, pp. 18-29.
- J. H. An, 2009, "Comparison of the Leakage Flow Rate between Two Shapes of Labyrinth Seal in a Steam Turbine", Hanyang university Master's thesis.
- D. S. Bae , 2009, "Numerical Study of Unsteady Mixed Convection in a Cavity with High Viscous Fluid", Journal of The Korean Society for Power System Engineering, Vol. 13, No. 5, pp. 11-17.
- H. S. Kang, 2008, "A Study on the Characteristic of the Hydrostatic Bearing in the Hydraulic Cylinder", Journal of the Korean Society of Marine Engineering, Vol. 32, No. 4, pp. 522-527. https://doi.org/10.5916/jkosme.2008.32.4.522
피인용 문헌
- 정압베어링에서 입구압력 및 틈새간격 변화에 따른 누설량의 상관관계에 관한 연구 vol.20, pp.6, 2015, https://doi.org/10.9726/kspse.2016.20.6.034
- A Study on the Analysis of a Main Drive Hydraulic Cylinder for Concrete Pump Car vol.19, pp.5, 2015, https://doi.org/10.17958/ksmt.19.5.201710.735
- Development of High Traction In-pipe Robot Adjustable 500~800 mm Pipe and Verification of the Capability vol.25, pp.4, 2015, https://doi.org/10.9726/kspse.2021.25.4.052