Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Ultimate strength of long-span buildings with P.E.B (Pre-Engineered Building) system

  • Lee, Seong-Hui (Office Equipment Examination Division, Patent Examination Bureau I, Korean Intellectual Property Office) ;
  • Kim, Young-Ho (Institute of R&D, Jiseung Consultant Co., Ltd.) ;
  • Choi, Sung-Mo (School of Architectural Engineering, University of Seoul)
  • Received : 2014.04.14
  • Accepted : 2015.11.05
  • Published : 2015.12.25
⟨ Previous Next ⟩

Abstract

With the improvement of the quality of construction materials and the development of construction technologies, large-scale long-span steel frame buildings have been built recently. The P.E.B system using tapered members is being employed as an economically-efficient long-span structure owing to its advantage of being able to distribute stress appropriately depending on the size of sectional areas of members. However, in December 2005 and in February 2014, P.E.B buildings collapsed due to sudden loads such as snow loads and wind gusts. In this study, the design and construction of the P.E.B system in Korea were analyzed and its structural safety was evaluated using the finite element analysis program to suggest how to improve the P.E.B system in order to promote the efficient and rational application of the system.

Keywords

References

  1. Abidelah, A., Bouchair, A. and Kerdal, D.E. (2012), "Experimental and analytical behavior of bolted end-plate connections with or without stiffeners", J. Construct. Steel Res., 76, 13-27. https://doi.org/10.1016/j.jcsr.2012.04.004
  2. AISC (2001), Manual of Steel Construction-Load and Resistance Factor Design, (3rd Edition), American Institute of Steel Construction.
  3. Andrade, A., Camotim, D. and Dinis, P.D (2007), "Lateral-torsional buckling of singly symmetric webtapered thin walled I-beams : 1D model vs. shell FEA", Comput. Struct., 85(17-18), 1343-1359. https://doi.org/10.1016/j.compstruc.2006.08.079
  4. ANSYS (2005), ANSYS 9.0 Program Manual.
  5. ASCE 7-95 (1995), Minimum Design Loads for Buildings and Other Structures.
  6. Bazeos, N. and Karabalis, D.L. (2006), "Efficient computation of buckling loads for plane steel frames with tapered members", Eng. Struct., 28(5), 771-775. https://doi.org/10.1016/j.engstruct.2005.10.004
  7. Dessouki, A.K., Youssef, A.H. and Ibrahim, M.M. (2013), "Behavior of I-beam Bolted Extended end-plate moment connections", Ain Shams Eng. J., 4(4), 685-699. https://doi.org/10.1016/j.asej.2013.03.004
  8. Hernandez, S., Fontan, A.N., Perezzan, J.C. and Loscos, P. (2005), "Design optimization of steel portal frames", Adv. Eng. Software, 36(9), 626-633. https://doi.org/10.1016/j.advengsoft.2005.03.006
  9. Hong, J.K. and Uang, C.M. (2012), "Cyclic testing of a metal building moment frame system with web-tapered members", J. Construct. Steel Res., 70, 248-255 https://doi.org/10.1016/j.jcsr.2011.09.005
  10. Hwang, J.S., Chang, K.C. and Lee, G.C. (1991), "Seismic behavior of gable frame consisting of tapered members", J. Struct. Eng., 117(3), 808-821. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:3(808)
  11. Larue, B., Khelil, A. and Gueury, M. (2007), "Elastic flexural-torsional buckling of steel beams with rigid and continuous lateral restraints", J. Construct. Steel Res., 63(5), 692-708. https://doi.org/10.1016/j.jcsr.2006.07.004
  12. Lee, S.H., Shim, H.J., Chae, H.S., Lee, E.T., Hong, S.J. and Choi, S.M. (2006), "Evaluation of structural safety of long-span one-storied warehouse building based on non-linear analysis", International Symposium on Steel Structures (ISSS), pp. 1340-1348.
  13. Lee, S.H., Kim, J.H. and Choi, S.M. (2009), "Structural behavior of tension joint with high-strength bolted split-tee", Int. J. Steel Struct., 9(2), 93-105. https://doi.org/10.1007/BF03249484
  14. Li, J.J. and Li, G.Q. (2004), "Reliability-based integrated design of steel portal frames with tapered members", Struct. Safe., 26(2), 221-239. https://doi.org/10.1016/j.strusafe.2003.02.001
  15. Li, J.J., Li, G.Q. and Chan, S.L. (2003), "A second-order inelastic model for steel frames of tapered members with slender web", Eng. Struct., 25(8), 1033-1043. https://doi.org/10.1016/S0141-0296(03)00043-9
  16. Lim, C., Choi, W. and Sumner, E.A. (2012), "Low cycle fatigue life prediction using a four-bolt extended unstiffened end plate moment connection", Eng. Struct., 41, 373-384. https://doi.org/10.1016/j.engstruct.2012.03.039
  17. Lim, C., Choi, W. and Sumner, E.A. (2013), "Parametric study using finite element simulation for low cycle fatigue behavior of end plate moment connection", Steel Compos. Struct., Int. J., 14(1), 57-71. https://doi.org/10.12989/scs.2013.14.1.057
  18. Lin, S, Huang, Z. and Fan, M. (2013), "Analysis of end-plate connections at elevated temperatures", Steel Compos. Struct., Int. J., 15(1), 81-101. https://doi.org/10.12989/scs.2013.15.1.81
  19. Masika, R.J. and Dunai, L. (1995), "Behaviour of bolted end-plate portal frame joints", J. Construct. Steel Res., 32(2), 207-225. https://doi.org/10.1016/0143-974X(95)93173-2
  20. MBMA (2002), Metal Building Systems Manual, Metal Building Manufactufacturers Association.
  21. Nogueiro, P., Silva, L.S., Bento, R. and Simoes, R. (2009), "Calibration of model parameters for the cyclic response of end-plate beam-to-column steel-concrete composite joints", Steel Compos. Struct., Int. J., 9(1), 39-58.
  22. Polyzois, D. and Raftoyiannis, I. (1998), "Lateral-torsional stability of steel web-tapered I-beams", J. Struct. Eng., 124(10), 1208-1216. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1208)
  23. Saffari, H., Rahgozar, R. and Jahanshahi, R. (2008), "An efficient method for computation of effective length factor of columns in a steel gabled frame with tapered members", J. Construct. Steel Res., 64(4), 400-406. https://doi.org/10.1016/j.jcsr.2007.09.001
  24. Seek, M.W. and Murray, T.M. (2008), "Lateral restraint forces in Z-section roof systems using the component stiffness method", J. Construct. Steel Res., 64(12), 1366-1378. https://doi.org/10.1016/j.jcsr.2007.12.010
  25. Shim, H.J., Kim, J.W., Lee, S.H., Kim, J.H., Lee, E.T., Kang, S.B. and Choi, S.M. (2006), "Flexural behavior of tapered i-section beams with slender web", International Symposium on Steel Structures (ISSS), pp. 1349-1355.
  26. Yau, J.D. (2006), "Stability of tapered I-Beams under torsional moments", Finite Elem. Anal. Des., 42(10), 914-927. https://doi.org/10.1016/j.finel.2006.01.008
  27. Zahmatkesh, F., Osman, M.H., Talebi, E. and Kueh, A.B.H. (2014), "Analytical study of slant end-plate connection subjected to elevated temperatures", Steel Compos. Struct., Int. J., 17(1), 47-67. https://doi.org/10.12989/scs.2014.17.1.047

Cited by

  1. Lateral-torsional buckling of functionally graded tapered I-beams considering lateral bracing vol.28, pp.4, 2018, https://doi.org/10.12989/scs.2018.28.4.403