참고문헌
-
S. Lee, K. S. Lee, S. K. Woo, J. W. Kim, T. Ishihara, and D. K. Kim, "Oxygen-Permeating Property of
$LaSrBFeO_3$ (B=Co, Ga) Perovskite Membrane Surface-Modified by$LaSrCoO_3$ ," Solid State Ionics, 158 287-96 (2003). https://doi.org/10.1016/S0167-2738(02)00821-4 - X. Tan, Y. Liu, and K. Li, "Mixed Conducting Ceramic Hollow-Fiber Membranes for Air Separation," AlChE Journal, 51 [7] 1991-2000 (2005). https://doi.org/10.1002/aic.10475
- J. H. Park, E. Lee, T. W. Kim, H. J. Yim, and K. S. Lee, "Fracture Behavior of Glass/Resin/Glass Sandwich Structures with Different Resin Thicknesses," Trans. Korean Soc. Mech. Eng. A, 34 [12] 1849-56 (2010). https://doi.org/10.3795/KSME-A.2010.34.12.1849
- G. H. Cho, E. H. Kim, Y. G. Jung, and Y. K. Byeun, "Improving Oxidation Resistance and Fracture Strength of MgO-C Refractory Material Through Precursor Coating," Surf. Coat. Technol., 260 429-32 (2014). https://doi.org/10.1016/j.surfcoat.2014.11.035
- K. S. Lee, S. K. Lee, B. R. Lawn, and D. K. Kim, "Contact Damage and Strength Degradation in Brittle/Quasi-Plastic Silicon Nitride Bilayers," J. Am. Ceram. Soc., 81 [9] 2394-404 (1998). https://doi.org/10.1111/j.1151-2916.1998.tb02635.x
- J. B. Davis, A. Kristoffersson, E. Carlstrom, and W. J. Clegg, "Fabrication and Crack Deflection in Ceramic Laminates with Porous Interlayers," J. Am. Ceram. Soc., 83 [10] 2369-74 (2000). https://doi.org/10.1111/j.1151-2916.2000.tb01563.x
-
K. S. Lee, K. I. Jung, Y. S. Heo, T. W. Kim, Y. G. Jung, and U. Paik, "Thermal and Mechanical Properties of Sintered Bodies and EB-PVD Layers of
$Y_2O_3$ Added$Gd_2Zr_2O_7$ Ceramics for Thermal Barrier Coatings," J. Alloys Compd., 507 448-55 (2010). https://doi.org/10.1016/j.jallcom.2010.07.196 - K. S. Lee, D. H. Lee, and T. W. Kim, "Microstructure Controls in Gadolinium Zirconate/YSZ Double Layers and Their Properties," J. Ceram. Soc. Jpn., 122 [8] 668-73 (2014). https://doi.org/10.2109/jcersj2.122.668
- Y. H. Hsu, I. G. Turner, and A. W. Miles, "Fabrication of Porous Bioceramics with Porosity Gradients Similar to the Bimodal Structure of Cortical and Cancellous Bone," J. Mater. Sci., 18 2251-56 (2007).
-
J. H. Kang, H. M. Cha, Y. G. Jung, and U. Paik, "Crack Suppression and Residual Stress in
$BaTiO_3$ Based Ni-MLCCs of Y5V Specification through Post-Process," J. Mater. Process. Technol., 205 160-67 (2008). https://doi.org/10.1016/j.jmatprotec.2007.11.093 - K. S. Lee, S. K. Woo, I. S. Han, D. W. Seo, S. J. Park, and Y. O. Park, "Filtering Characteristics of Porous SiC Filter with High Surface Area," J. Ceram. Soc. Jpn., 110 [7] 656-61 (2002). https://doi.org/10.2109/jcersj.110.656
- Y. Zhang, F. He, S. Xia, L. Kong, D. Xu, and Z. Wu, "Adsorption of Sediment Phosphorus by Porous Ceramic Filter Media Coated with Nano-Titanium Dioxide Film," Ecol. Eng., 64 ,186-92 (2014). https://doi.org/10.1016/j.ecoleng.2013.12.056
- K. S. Lee, D. W. Seo, J. H. Yu, and S. K. Woo, "A Study on the Improvement of Strength in NiO-YSZ Porous Anode Material for Solid Oxide Fuel Cell," J. Korean Ceram. Soc., 40 [3] 241-48 (2003). https://doi.org/10.4191/KCERS.2003.40.3.241
- G. Pia, L. Casnedi, M. Ionta, and U. Sanna, "On the Elastic Deformation Properties of Porous Ceramic Materials Obtained by Pore-Forming Agent Method," Ceram. Int., 41 11097-105 (2015). https://doi.org/10.1016/j.ceramint.2015.05.057
- K. S. Lee, S. K. Kim, C. Kim, T. W. Kim, and D. K. Kim, "Cracking of Densely Coated Layer Adhesively Bonded to Porous Substrates Under Hertzian Stress," J. Mater. Sci., 42 9116-20 (2007). https://doi.org/10.1007/s10853-007-2063-2
- K. S. Lee, S. Wuttiphan, X. Z. Hu, S. K. Lee, and B. R. Lawn, "Contact-Induced Transverse Fractures in Brittle Layers on Soft Substrates: A Study on Silicon Nitride Bilayers," J. Am. Ceram. Soc., 81 [3] 571-80 (1998). https://doi.org/10.1111/j.1151-2916.1998.tb02376.x
- K. S. Lee, Y. W. Rhee, D. H. Blackburn, and B. R. Lawn, "Cracking of Brittle Coatings Adhesively Bonded to Substrates of Unlike Modulus," J. Mater. Res., 15 [8] 1653-56 (2000). https://doi.org/10.1557/JMR.2000.0237
- K. S. Lee, K. S. Jang, J. H. Park, T. W. Kim, I. S. Han, and S. K. Woo, "Designing the Fiber Volume Ratio in SiC Fiber-Reinforced SiC Ceramic Composites," Mater. Des., 32 4394-401 (2011). https://doi.org/10.1016/j.matdes.2011.03.080
-
S. H. Park, S. Lee, J. H. Yu, S. K. Woo, and K. S. Lee, "Fabrication of
$Li_2ZrO_3$ Membrane and Evaluation on the Mechanical Properties Before and After$CO_2$ Separation," J. Korean Ceram. Soc., 44 [1] 58-64 (2007). https://doi.org/10.4191/KCERS.2007.44.1.058 -
B. N. Nair, R. P. Burwood, V. J. Goh, K. Nakagawa, and T. Yamaguchi, "Lithium Based Ceramic Materials and Membranes for High Temperature
$CO_2$ Separation," Prog. Mater. Sci., 54 511-41 (2009). https://doi.org/10.1016/j.pmatsci.2009.01.002 - B. R. Lawn, "Indentation of Ceramics with Spheres: A Century after Hertz," J. Am. Ceram. Soc., 81 [8] 1977-94 (1998). https://doi.org/10.1111/j.1151-2916.1998.tb02580.x
- J. H. Ha, J. H. Kim, and D. K. Kim, "Elasticity and Thermal Conductivity of Porous Ceramics with Controlled Pore Structure," J. Ceram. Soc. Jpn., 112 [5] 1084-88 (2004).
- R. W. Rice, "Comparison of Stress Concentration Versus Minimum Solid Area Based Mechanical Property-Porosity Relation," J. Mater. Sci., 28 2187-90 (1993). https://doi.org/10.1007/BF00367582
- D. H. Lee and K. S. Lee, "Mechanical Behavior of Layered YSZ Thermal Barrier Coatings using Indentation Test," J. Korean Ceram. Soc., 48 [5] 396-403 (2011). https://doi.org/10.4191/kcers.2011.48.5.396
- A. Davison and M. Tinkham, "Phenomenological Equations for the Electrical Conductivity of Microscopically Inhomogeneous Materials," Phys. Rev., 13 [8] 3261-67 (1976). https://doi.org/10.1103/PhysRevB.13.3261