The Journal of the Korea institute of electronic communication sciences (한국전자통신학회논문지)

Korea Institute of Electronic Communication Science (한국전자통신학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Monitoring System for Safety Operation of Crane

크레인 안전 운전을 위한 모니터링 시스템 개발

  • 배영철 (전남대학교 전기.전자통신.컴퓨터 공학부)
  • Received : 2014.09.23
  • Accepted : 2014.11.10
  • Published : 2014.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the new integrated crane monitoring system that complemented the point at issue for existing crane monitoring system is implemented. The Implementing monitoring system based on wireless communication system, consist of a measuring system of total load currents of main circuit breaker, a temperature and vibration measuring system with temperature sensors and vibration sensors for monitoring an oil and bearing of a main decelerator, a temperature measuring system with temperature sensors of a main motor bearing, and sensors for fire monitoring of an entire electrical space. The measured data from these sensors transmit main controller which is located in external location. Then the Integrating monitoring system is implemented and is performed the performance test to performing diagnosis of motors of a crane.

본 논문에서는 현존하는 크레인 모니터링 시스템의 문제점을 보완한 새로운 크레인 통합 모니터링 시스템 구현한다. 구현하는 모니터링 시스템은 무선 네트워크를 기본으로 주 차단기의 전체 부하전류를 측정하기 위한 시스템, 주 감속기의 오일 및 베어링 감시를 위한 온도와 진동 측정 시스템, 주권 모터 베어링의 온도 측정 시스템, 또한 전기실 전체의 화재 감시를 위한 센서 등을 갖추고 여기에서 측정한 데이터를 중앙의 감시실로 전송하여 진단을 수행하는 통합 모니터링 시스템을 구현하고 성능시험을 수행한다.

Keywords

References

  1. Y.-C. Bae, "Diagnosis of power supply by analysis of chaotic nonlinear dynamics", J. of The Korea Institute of Electronic Communication Sciences, vol. 8, no. 1, 2013, pp. 13-19. https://doi.org/10.13067/JKIECS.2013.8.1.013
  2. S.-S. Hwang, Y-C. Bae, "Diagnosis of power supply using time-series of infrared camera ", J. of The Korea Institute of Electronic Communication Sciences, vol. 7, no. 6, 2012, pp. 1443-1447.
  3. J. So, Y.-C. Bae, " Design of Reflect mirror for Infrared Camera", in Pro. of KIECS 2013 fall conference, vol. 7, no. 2, 2013, pp. 357-359.
  4. Y. Bae, " Design of a Reflector Mirror for Infrared Camera in the High Magnetic Field of Power System, "J. of The Korea Institute of Electronic Communication Sciences, vol. 9, no. 2, 2014, pp. 255-260. https://doi.org/10.13067/JKIECS.2014.9.2.255
  5. Y. Bae, "Design of a Reflector for Infrared Camera," J. of The Korea Institute of Electronic Communication Sciences, vol. 9, no. 1, 2014, pp. 97-103. https://doi.org/10.13067/JKIECS.2014.9.1.97
  6. S. Kim and S. Kim, "Development of fault diagnostic system for mass unbalance and aerodynamic asymmetry of wind turbine system by using GH-Bladed," J. of Korean Institute of intelligent system, vol. 24, no. 1, pp. 113-109, 2014. https://doi.org/10.5391/JKIIS.2014.24.1.096
  7. D. Moon and S.Kim, "Development of Inverter fault diagnostic algorithm based on CT for small-sized wind turbine system," J. of Korean Institute of intelligent system, vol. 21, no. 6, pp. 767-774, 2011. https://doi.org/10.5391/JKIIS.2011.21.6.767
  8. D. Moon and S. Kim, "Development of intelligent fault diagnostic system for mechanical element of wind power generator," J. of Korean Institute of intelligent system, vol. 24, no. 1, pp. 78-83, 2014. https://doi.org/10.5391/JKIIS.2014.24.1.078
  9. S. Ahn, S. Choi and S. Kim, "Development of Fault Diagnostic Algorithm based on Spectrum Analysis of Acceleration Signal for Wind Turbine System," J. of Korean Institute of intelligent system, vol. 22, no. 6, pp. 675-680, 2012. https://doi.org/10.5391/JKIIS.2012.22.6.675
  10. Y. Kim, and Y. Bae, "Design of Fault-Diagnosis System for Rolling Mill" Bearing," J. of Korean Institute of intelligent system, vol. 8, no. 7 pp. 36-43, 1996.
  11. Y. Bae, "A Study on chaotic Phenomena in Rolling Mill Bearing," J. of Korean Institute of intelligent system, vol. 11, no. 4 pp. 315-319, 2001.
  12. W. Yim, C. Ruy, K., J. Ko, D. Hong amd Y. Bae, "A Study on chaotic Phenomena in Rolling Mill Bearing," J. of Korean Institute of intelligent system, vol. 9, no. 4, pp. 426-435, 1999.