DOI QR코드

DOI QR Code

보강제 변화에 따른 실리콘 고무의 트래킹 열화 특성에 관한 연구

A Study on Tracking Degradation Properties of Silicone Rubber due to Reinforcing Agent

  • 이성일 (한국교통대학교 안전공학과)
  • Lee, Sung Ill (Department of safety Engineering, Korea National University of Transportation)
  • 투고 : 2014.11.10
  • 심사 : 2014.11.19
  • 발행 : 2014.12.01

초록

It found that the maximum temperature of the arc discharge occurred on the Silicone rubber sample significantly decreased with increasing the reinforcing agent. It was confirmed that the current value decreased with increasing the aluminium trihydrate($Al(OH)_3$) and the current value increased with reducing the primary resistance over time. Regarding these results, may be it is because the degradation due to the electro-conductive carbonization was improved and the properties of dielectric breakdown was reduced by the flame retardant reinforcing agent. It found that the electro-conductive carbonized road has not happened by increasing the flame retardant reinforcing agent. Regarding to the arc discharge, this study show that the arc arising near the lower electrode of sample has disappeared.

키워드

참고문헌

  1. H. G. Cho and Y. K. Park, J. KIEEME, 10, 770 (1997).
  2. G. Iyer, R. S. Gorur, R. Richert, A Krivda, and L. E. Schmidt, IEEE Trans. Dielectr. Electr. Insul., 18, 659 (2011). https://doi.org/10.1109/TDEI.2011.5931050
  3. D. H. Han, H. Y. Park, D. P. Kang, and K. E. Min, Proc. of 6th ICPADM, 354 (2000).
  4. Y. Toureille and J. P. Reboul, Ann. Soc. Sci., 89, 190 (1978).
  5. D. Y. Yi, J. H. Lee, and M. K. Han, IEEE Int'l Sym. (Electrical Insulation, Baltimore, 1992)
  6. J. J. Park, C. H. Lee, J. Y. Lee, and H. D. Kim, IEEE Trans. Dielectr. Electr. Insul., 18, 667 (2011). https://doi.org/10.1109/TDEI.2011.5931051
  7. J. Mackevich and M. Shah, IEEE Electrical Insulation Magazine, 13, 5 (1997). https://doi.org/10.1109/57.591510