참고문헌
- Schwenke, H., Knapp W., Haitjema H., Weckenmann A., Schmitt, R., and Delbressine F., "Geometric Error Measurement and Compensation of Machines-An Update," Ann CIRP-Manuf. Technol., Vol. 57, No. 2, pp. 660-675, 2008. https://doi.org/10.1016/j.cirp.2008.09.008
- Gao, W., Arai, Y., Shibuya, A., Kiyono, S., and Park, C. H., "Measurement of Multi-Degree-of-Freedom Error Motions of a Precision Linear Air-Bearing Stage," Precision Eng., Vol. 30, No. 1, pp. 96-103, 2006. https://doi.org/10.1016/j.precisioneng.2005.06.003
- Lee, S. W., Mayor, R., and Ni, J., "Development of a Six-Degree-of-Freedom Geometric Error Measurement System for a Meso-Scale Machine Tool," J. Manuf. Sci. Eng., Vol. 127, No. 4, pp. 857-865, 2005. https://doi.org/10.1115/1.2035692
- Wang, W., Kweon, S., Hwang, C., Kang, N., Kim, Y., and Yang, S., "Development of an Optical Measuring System for Integrated Geometric Errors of a Three-Axis Miniaturized Machine Tool," Int. J. Adv. Manuf. Technol., Vol. 43, No. 7-8, pp. 701-709, 2009. https://doi.org/10.1007/s00170-008-1743-7
- Fan, K. C., Chen, M. J., and Huang, W. M., "A Six-Degree-of-Freedom Measurement System for the Motion Accuracy of Linear Stages," Int. J. Mach. Tools Manufact., Vol. 38, No. 3, pp. 155-164, 1998. https://doi.org/10.1016/S0890-6955(97)00055-2
- Chou, C., Chou, L. Y., Peng, C. K., Huang, Y. C., and Fan, K. C., "CCD-based CMM Geometrical Error Measurement using Fourier Phase Shift Algorithm," Int. J. Mach. Tools Manuf., Vol. 37, No. 5, pp. 579-590, 1997. https://doi.org/10.1016/S0890-6955(96)00078-8
- Kuang, C., Feng, Q., and Zhang, B., "A Four-Degreeof-Freedom Laser Measurement System (FDMS) using a Single-Mode Fiber-Coupled Laser Module," Sens. Actuator A-Phys., Vol. 125, No. 1, pp. 100-108, 2005. https://doi.org/10.1016/j.sna.2005.05.022
- Liu, C. H., Jywe, W. Y., Hsu, C. C., and Hsu, T. H., "Development of a Laser-Based High-Precision Six-Degrees-of-Freedom Motion Errors Measuring System for Linear Stage," Rev. Sci. Instrum., Vol. 76, No. 5, Paper No. 055110, 2005. https://doi.org/10.1063/1.1915520
- Pan, T. S., Lee, J. Y., Wu, S. W., Hsieh, H. L., and Hsu, C. C., "Double Corner Cube Method for Enhancing the Sensitivity of Straightness Measurement," SICE Annual Conference (SICE), pp. 1010-1013, 2012.
- Kuang, C., Hong, E., Feng, Q., Zhang, B., and Zhang, Z., "A Novel Method to Enhance the Sensitivity for Two-Degrees-of-Freedom Straightness Measurement," Meas. Sci. Technol., Vol. 18, No. 12, pp. 3795-3800, 2007. https://doi.org/10.1088/0957-0233/18/12/014
- Liu, C. H., Chen, J. H., and Teng, Y. F., "Development of a Straightness Measurement and Compensation System with Multiple Right-Angle Reflectors and a Lead Zirconate Titanate-based Compensation Stage," Rev. Sci. Instrum., Vol. 80, No. 11, Paper No. 115105, 2009. https://doi.org/10.1063/1.3254018
- Lin, P. D., Jywe, W., and Chen, C. J., "General Method for Determining the Sensor Readings of Motion Measurement Systems by using Skew-ray Tracing Method," Optik, Vol. 120, No. 6, pp. 257-264, 2009. https://doi.org/10.1016/j.ijleo.2007.06.026
- Liu, C. S. and Lin, P. D., "Determination of the Linear Equations of Position-Sensing Detectors for Small Motion Measurement Systems," J. Opt. Soc. Am. A, Vol. 27, No. 11, pp. 2480-2487, 2010. https://doi.org/10.1364/JOSAA.27.002480
- Lee, J. W. and Cho, N. G., "Precision Displacement of Three-DOF Micro Motions using Position Sensitive Detector and spherical Reflector," J. Korean Soc. Precis. Eng., Vol. 20, No. 7, pp. 99-104, 2003.