Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Prediction of shear capacity of channel shear connectors using the ANFIS model

  • Received : 2013.08.08
  • Accepted : 2014.04.10
  • Published : 2014.11.25
⟨ Previous Next ⟩

Abstract

Due to recent advancements in the area of Artificial Intelligence (AI) and computational intelligence, the application of these technologies in the construction industry and structural analysis has been made feasible. With the use of the Adaptive-Network-based Fuzzy Inference System (ANFIS) as a modelling tool, this study aims at predicting the shear strength of channel shear connectors in steel concrete composite beam. A total of 1200 experimental data was collected, with the input data being achieved based on the results of the push-out test and the output data being the corresponding shear strength which were recorded at all loading stages. The results derived from the use of ANFIS and the classical linear regressions (LR) were then compared. The outcome shows that the use of ANFIS produces highly accurate, precise and satisfactory results as opposed to the LR.

Keywords

Acknowledgement

Supported by : University of Malaya UMRG

References

  1. Abraham, A. (2005), Rule-Based Expert Systems, Handbook of Measuring System Design.
  2. AISC (2005), Specification for Structural Steel Buildings, American Institute of Steel Construction, Inc., Chicago, IL, USA.
  3. ASTM, C39 (2005), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, Annual Book of ASTM Standards.
  4. Bilgehan, M. (2011), "Comparison of ANFIS and NN models with a study in critical buckling load estimation", Applied Soft Computing, 11(4), 3779-3791. https://doi.org/10.1016/j.asoc.2011.02.011
  5. Hakim, S.J.S., Noorzaei, J., Jaafar, M., Jameel, M. and Mohammadhassani, M. (2011), "Application of artificial neural networks to predict compressive strength of high strength concrete", Int. J. Phys. Sci., 6(5), 975-981.
  6. Hakim, S.J.S. and Razak, H.A. (2013a), "Adaptive Neuro Fuzzy Inference System (ANFIS) and Artificial Neural Networks (ANNs) for structural damage identification", Struct. Eng. Mech., Int. J., 45(6), 779-802. https://doi.org/10.12989/sem.2013.45.6.779
  7. Hakim, S.J.S. and Razak, H.A. (2013b), "Structural damage detection of steel bridge girder using artificial neural networks and finite element models", Steel Compos. Struct., Int. J., 14(4), 367-377. https://doi.org/10.12989/scs.2013.14.4.367
  8. Hosain, M. and Pashan, A. (2009), "New design equations for channel shear connectors in composite beams", Can. J. Civil Eng., 36(9), 1435-1443. https://doi.org/10.1139/L09-078
  9. Jang, J.S. (1993), "ANFIS: Adaptive-network-based fuzzy inference system", Systems, Man and Cybernetics, IEEE Transactions on, 23(3), 665-685. https://doi.org/10.1109/21.256541
  10. Lali, P. and Setayeshi, S. (2011), "A novel approach to develop the control of Telbot using ANFIS for nuclear hotcells", Ann. Nucl. Energy, 38(10), 2156-2162. https://doi.org/10.1016/j.anucene.2011.06.021
  11. Maleki, S. and Bagheri, S. (2008a), "Behavior of channel shear connectors, Part I: Experimental study", J. Constr. Steel Res., 64(12), 1333-1340. https://doi.org/10.1016/j.jcsr.2008.01.010
  12. Maleki, S. and Bagheri, S. (2008b), "Behavior of channel shear connectors, Part II: Analytical study", J. Constr. Steel Res., 64(12), 1341-1348. https://doi.org/10.1016/j.jcsr.2008.01.006
  13. Maleki, S. and Mahoutian, M. (2009), "Experimental and analytical study on channel shear connectors in fiber-reinforced concrete", J. Constr. Steel Res., 65(8-9), 1787-1793. https://doi.org/10.1016/j.jcsr.2009.04.008
  14. Mamdani, E.H. and Assilian, S. (1975), "An experiment in linguistic synthesis with a fuzzy logic controller", Int. J. Man. Mach. Stud., 7(1), 1-13. https://doi.org/10.1016/S0020-7373(75)80002-2
  15. Mohammadhassani, M., Nezamabadi-Pour, H., Jumaat, M.Z., Jameel, M., Hakim, S.J.S. and Zargar, M. (2013), "Application of the ANFIS model in deflection prediction of concrete deep beam", Struct. Eng. Mech., Int. J., 45(3), 323-336. https://doi.org/10.12989/sem.2013.45.3.323
  16. NBC (2005), National Building Code of Canada.
  17. Neville, A. (2008), Properties of Concrete, Prentice Hall, Malaysia.
  18. Neville, A. and Brooks, J. (2008), Concrete Technology, Prentice Hall, Malaysia.
  19. Pashan, A. (2006), "Behaviour of channel shear connectors: Push-out tests", M.S. Thesis, Department of Civil Engineering, University of Saskatchewan, Canada.
  20. Razak, H.A. and Sajedi, F. (2011), "The effect of heat treatment on the compressive strength of cement-slag mortars", Mater. Design, 32(8-9), 4618-4628. https://doi.org/10.1016/j.matdes.2011.04.038
  21. Sajedi, F. and Razak, H.A. (2011), "Effects of thermal and mechanical activation methods on compressive strength of ordinary Portland cement-slag mortar", Mater. Design, 32(2), 984-995. https://doi.org/10.1016/j.matdes.2010.08.038
  22. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2010), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)", Adv. Mater. Res., 168-170, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303
  23. Shariati, M., Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Scientific Res. Ess., 6(4), 977-983.
  24. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012a), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Design, 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039
  25. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012b), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Design, 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039
  26. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", J. Const. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050
  27. Shim, C. (2004), "Experiments on limit state design of large stud shear connectors", KSCE J. Civil Eng., 8(3), 313-318. https://doi.org/10.1007/BF02836013
  28. Slutter, R. and Driscoll, G.C. (1965), "Flexural strength of steel-concrete composite beams", J. Struct. Eng. - ASCE, 91(2), 71-99.
  29. Takagi, T. and Sugeno, M. (1985), "Fuzzy identification of systems and its applications to modeling and control", Systems, Man Cybernetics, IEEE Transactions, 35(1), 116-132.
  30. Viest, I. (1952), Full-scale tests of channel shear connectors and composite t-beams, Bulletin Series 405.
  31. Yilmaz, I. and Kaynar, O. (2011), "Multiple regression, ANN (RBF, MLP) and ANFIS models for prediction of swell potential of clayey soils", Expert Syst. Appl., 38(5), 5958-5966. https://doi.org/10.1016/j.eswa.2010.11.027
  32. Zadeh, L.A. (1965), "Fuzzy sets", Inform. Control, 8(3), 338-353. https://doi.org/10.1016/S0019-9958(65)90241-X

Cited by

  1. Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength vol.21, pp.3, 2016, https://doi.org/10.12989/scs.2016.21.3.679
  2. Prostate Cancer Probability Prediction By Machine Learning Technique vol.35, pp.10, 2017, https://doi.org/10.1080/07357907.2017.1406496
  3. Applicability of Newton’s law of cooling in monetary economics vol.494, 2018, https://doi.org/10.1016/j.physa.2017.12.030
  4. Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique 2019, https://doi.org/10.1007/s10845-017-1306-6
  5. A machine learning approach for predicting the relationship between energy resources and economic development vol.495, 2018, https://doi.org/10.1016/j.physa.2017.12.082
  6. Applicability of Artificial Neural Networks to Predict Mechanical and Permeability Properties of Volcanic Scoria-Based Concrete vol.2018, pp.1687-8094, 2018, https://doi.org/10.1155/2018/5207962
  7. Rock brittleness prediction through two optimization algorithms namely particle swarm optimization and imperialism competitive algorithm pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0648-9
  8. Simulating the peak particle velocity in rock blasting projects using a neuro-fuzzy inference system pp.1435-5663, 2019, https://doi.org/10.1007/s00366-018-0659-6
  9. Feasibility of imperialist competitive algorithm to predict the surface settlement induced by tunneling pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0641-3
  10. Applying two optimization techniques in evaluating tensile strength of granitic samples pp.1435-5663, 2019, https://doi.org/10.1007/s00366-018-0645-z
  11. Statistical evaluation of mathematics lecture performances by soft computing approach vol.26, pp.4, 2018, https://doi.org/10.1002/cae.21931
  12. Research on the Design of Roof Cutting Parameters of Non Coal Pillar Gob-side Entry Retaining Mining with Roof Cutting and Pressure Releasing pp.1573-1529, 2018, https://doi.org/10.1007/s10706-018-0676-7
  13. A combination of artificial bee colony and neural network for approximating the safety factor of retaining walls pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0625-3
  14. An intelligent based-model role to simulate the factor of safe slope by support vector regression pp.1435-5663, 2019, https://doi.org/10.1007/s00366-018-0677-4
  15. Development of a new hybrid ANN for solving a geotechnical problem related to tunnel boring machine performance pp.1435-5663, 2019, https://doi.org/10.1007/s00366-019-00701-8
  16. Developing an innovative soft computing scheme for prediction of air overpressure resulting from mine blasting using GMDH optimized by GA pp.1435-5663, 2020, https://doi.org/10.1007/s00366-019-00720-5
  17. A novel intelligent approach to simulate the blast-induced flyrock based on RFNN combined with PSO pp.1435-5663, 2019, https://doi.org/10.1007/s00366-019-00707-2
  18. Effects of a proper feature selection on prediction and optimization of drilling rate using intelligent techniques pp.1435-5663, 2020, https://doi.org/10.1007/s00366-019-00711-6
  19. A new methodology for optimization and prediction of rate of penetration during drilling operations pp.1435-5663, 2019, https://doi.org/10.1007/s00366-019-00715-2
  20. Numerical analysis of tilted angle shear connectors in steel-concrete composite systems vol.23, pp.1, 2017, https://doi.org/10.12989/scs.2017.23.1.067
  21. Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis vol.63, pp.2, 2014, https://doi.org/10.12989/sem.2017.63.2.259
  22. Dynamic mix design optimization of high-performance concrete vol.29, pp.1, 2014, https://doi.org/10.12989/scs.2018.29.1.067
  23. Distribution of shear force in perforated shear connectors vol.27, pp.3, 2014, https://doi.org/10.12989/scs.2018.27.3.389
  24. Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method vol.21, pp.5, 2018, https://doi.org/10.12989/cac.2018.21.5.525
  25. Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake vol.28, pp.4, 2014, https://doi.org/10.12989/scs.2018.28.4.439
  26. Shear capacity equation for channel shear connectors in steel-concrete composite beams vol.28, pp.4, 2014, https://doi.org/10.12989/scs.2018.28.4.483
  27. Strengthening of bolted shear joints in industrialized ferrocement construction vol.28, pp.6, 2014, https://doi.org/10.12989/scs.2018.28.6.681
  28. Application of ANFIS technique on performance of C and L shaped angle shear connectors vol.22, pp.3, 2018, https://doi.org/10.12989/sss.2018.22.3.335
  29. Practical use of computational building information modeling in repairing and maintenance of hospital building- case study vol.22, pp.5, 2014, https://doi.org/10.12989/sss.2018.22.5.575
  30. Prediction of visitors' thermal comfort in open urban areas vol.59, pp.4, 2014, https://doi.org/10.5937/zasmat1804495g
  31. Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer vol.23, pp.1, 2014, https://doi.org/10.12989/cac.2019.23.1.061
  32. Behavior of steel storage pallet racking connection - A review vol.30, pp.5, 2019, https://doi.org/10.12989/scs.2019.30.5.457
  33. Estimation of moment and rotation of steel rack connections using extreme learning machine vol.31, pp.5, 2014, https://doi.org/10.12989/scs.2019.31.5.427
  34. Moment-rotation prediction of precast beam-to-column connections using extreme learning machine vol.70, pp.5, 2014, https://doi.org/10.12989/sem.2019.70.5.639
  35. Intelligent design of retaining wall structures under dynamic conditions vol.31, pp.6, 2014, https://doi.org/10.12989/scs.2019.31.6.629
  36. Application of waste tire rubber aggregate in porous concrete vol.24, pp.4, 2014, https://doi.org/10.12989/sss.2019.24.4.553
  37. Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures vol.33, pp.3, 2014, https://doi.org/10.12989/scs.2019.33.3.319
  38. Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete vol.8, pp.3, 2014, https://doi.org/10.12989/acc.2019.8.3.225
  39. Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings vol.33, pp.4, 2019, https://doi.org/10.12989/scs.2019.33.4.569
  40. Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete vol.9, pp.24, 2019, https://doi.org/10.3390/app9245534
  41. Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils vol.19, pp.6, 2014, https://doi.org/10.12989/gae.2019.19.6.473
  42. Strain rate effects on soil-geosynthetic interaction in fine-grained soil vol.19, pp.6, 2014, https://doi.org/10.12989/gae.2019.19.6.533
  43. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2014, https://doi.org/10.12989/scs.2020.34.1.155
  44. Depiction of concrete structures with seismic separation under faraway fault earthquakes vol.9, pp.1, 2020, https://doi.org/10.12989/acc.2020.9.1.071
  45. Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load vol.20, pp.2, 2014, https://doi.org/10.12989/gae.2020.20.2.087
  46. A Combination of Feature Selection and Random Forest Techniques to Solve a Problem Related to Blast-Induced Ground Vibration vol.10, pp.3, 2014, https://doi.org/10.3390/app10030869
  47. Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber vol.20, pp.3, 2014, https://doi.org/10.12989/gae.2020.20.3.191
  48. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2014, https://doi.org/10.12989/scs.2020.34.3.347
  49. Optimizing reinforced concrete beams under different load cases and material mechanical properties using genetic algorithms vol.34, pp.4, 2020, https://doi.org/10.12989/scs.2020.34.4.467
  50. Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm) vol.25, pp.2, 2014, https://doi.org/10.12989/sss.2020.25.2.183
  51. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2014, https://doi.org/10.12989/scs.2020.34.5.743
  52. Novel approach for forecasting the blast-induced AOp using a hybrid fuzzy system and firefly algorithm vol.36, pp.2, 2014, https://doi.org/10.1007/s00366-019-00725-0
  53. A Monte Carlo simulation approach for effective assessment of flyrock based on intelligent system of neural network vol.36, pp.2, 2014, https://doi.org/10.1007/s00366-019-00726-z
  54. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2014, https://doi.org/10.12989/acc.2020.9.4.355
  55. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2014, https://doi.org/10.12989/scs.2020.35.2.187
  56. Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation vol.35, pp.2, 2014, https://doi.org/10.12989/scs.2020.35.2.237
  57. Performance assessment of buckling restrained brace with tubular profile vol.8, pp.4, 2020, https://doi.org/10.12989/anr.2020.8.4.323
  58. Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations vol.18, pp.5, 2020, https://doi.org/10.12989/eas.2020.18.5.567
  59. Crisis Management of Android Botnet Detection Using Adaptive Neuro-Fuzzy Inference System vol.7, pp.2, 2020, https://doi.org/10.1007/s40745-020-00265-1
  60. Development of Advanced Computer Aid Model for Shear Strength of Concrete Slender Beam Prediction vol.10, pp.11, 2014, https://doi.org/10.3390/app10113811
  61. Neuro-genetic, neuro-imperialism and genetic programing models in predicting ultimate bearing capacity of pile vol.36, pp.3, 2020, https://doi.org/10.1007/s00366-019-00752-x
  62. Developing new tree expression programing and artificial bee colony technique for prediction and optimization of landslide movement vol.36, pp.3, 2014, https://doi.org/10.1007/s00366-019-00754-9
  63. Investigation on the monotonic behavior of the steel rack upright-beam column connection vol.26, pp.1, 2014, https://doi.org/10.12989/sss.2020.26.1.103
  64. Investigation on the monotonic behavior of the steel rack upright-beam column connection vol.26, pp.1, 2014, https://doi.org/10.12989/sss.2020.26.1.103
  65. A model to develop the porosity of concrete as important mechanical property vol.26, pp.2, 2014, https://doi.org/10.12989/sss.2020.26.2.147
  66. Human development index in a context of human development: Review on the western Balkans countries vol.10, pp.9, 2014, https://doi.org/10.1002/brb3.1755
  67. An improved adaptive neuro-fuzzy inference system using probability trajectory-based clustering ensemble vol.9, pp.None, 2014, https://doi.org/10.1016/j.sciaf.2020.e00520
  68. Indirect measure of shear strength parameters of fiber-reinforced sandy soil using laboratory tests and intelligent systems vol.22, pp.5, 2014, https://doi.org/10.12989/gae.2020.22.5.397
  69. Developing a hybrid adoptive neuro-fuzzy inference system in predicting safety of factors of slopes subjected to surface eco-protection techniques vol.36, pp.4, 2014, https://doi.org/10.1007/s00366-019-00768-3
  70. Development of a novel hybrid intelligent model for solving engineering problems using GS-GMDH algorithm vol.36, pp.4, 2014, https://doi.org/10.1007/s00366-019-00769-2
  71. Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures vol.36, pp.4, 2014, https://doi.org/10.1007/s00366-019-00780-7
  72. Project planning and risk management as a success factor for IT projects in agricultural schools in Serbia vol.63, pp.None, 2014, https://doi.org/10.1016/j.techsoc.2020.101371
  73. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2014, https://doi.org/10.12989/acc.2020.10.5.393
  74. Effect of shear connectors on strength of structural sandwich panels vol.2, pp.12, 2014, https://doi.org/10.1007/s42452-020-03754-3
  75. Application of discrete element method (DEM) in characterization of bond-slip behavior in RC beams with confinement subjected to corrosion vol.28, pp.None, 2014, https://doi.org/10.1016/j.istruc.2020.10.026
  76. Experimental study on the hybrid shear connection using headed studs and steel plates vol.37, pp.6, 2020, https://doi.org/10.12989/scs.2020.37.6.649
  77. Prediction of total sediment load: A case study of Wadi Arbaat in eastern Sudan vol.26, pp.6, 2014, https://doi.org/10.12989/sss.2020.26.6.781
  78. A GENETIC PROGRAMMING APPROACH FOR ESTIMATING ECONOMIC SENTIMENT IN THE BALTIC COUNTRIES AND THE EUROPEAN UNION vol.27, pp.1, 2014, https://doi.org/10.3846/tede.2021.13989
  79. In-plane varying bending force effects on wave dispersion characteristics of single-layered graphene sheets vol.10, pp.2, 2021, https://doi.org/10.12989/anr.2021.10.2.101
  80. Ionic liquid coated magnetic core/shell CoFe2O4@SiO2 nanoparticles for the separation/analysis of trace gold in water sample vol.10, pp.3, 2014, https://doi.org/10.12989/anr.2021.10.3.295
  81. Experimental evaluation of new channel shear connector shapes vol.21, pp.3, 2014, https://doi.org/10.1007/s13296-021-00478-x
  82. Optimization algorithms for composite beam as smart active control of structures using genetic algorithms vol.27, pp.6, 2014, https://doi.org/10.12989/sss.2021.27.6.1041
  83. Assessment of microstructure and surface effects on vibrational characteristics of public transportation vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.101
  84. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  85. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2014, https://doi.org/10.12989/sss.2021.28.2.167
  86. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2014, https://doi.org/10.12989/scs.2021.40.6.853
  87. A new intelligence fuzzy-based hybrid metaheuristic algorithm for analyzing the application of tea waste in concrete as natural fiber vol.190, pp.None, 2021, https://doi.org/10.1016/j.compag.2021.106420
  88. Utilizing Artificial Intelligence to Predict the Superplasticizer Demand of Self-Consolidating Concrete Incorporating Pumice, Slag, and Fly Ash Powders vol.14, pp.22, 2021, https://doi.org/10.3390/ma14226792
  89. Analyzing the energy performance of buildings by neuro-fuzzy logic based on different factors vol.23, pp.12, 2014, https://doi.org/10.1007/s10668-021-01382-4
  90. Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures vol.278, pp.None, 2014, https://doi.org/10.1016/j.compstruct.2021.114524
  91. Evaluation and monitoring of impact resistance of fiber reinforced concrete by adaptive neuro fuzzy algorithm vol.34, pp.None, 2014, https://doi.org/10.1016/j.istruc.2021.09.072
  92. Information and knowledge behind data from underground rock grouting vol.13, pp.6, 2014, https://doi.org/10.1016/j.jrmge.2021.06.013
  93. Adaptive neuro fuzzy evaluation of energy and non‐energy material productivity impact on sustainable development based on circular economy and gross domestic product vol.31, pp.1, 2014, https://doi.org/10.1002/bse.2878
  94. Engine performance fueled with jojoba biodiesel and enzymatic saccharification on the yield of glucose of microbial lipids biodiesel vol.239, pp.no.pd, 2014, https://doi.org/10.1016/j.energy.2021.122390