Steel and Composite Structures

  • 제17권5호
  • /
  • Pages.601-621
  • /
  • 2014
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of tapered-end shape of FRP sheets on stress concentration in strengthened beams under thermal load

  • El Mahi, Benaoumeur (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department) ;
  • Kouider Halim, Benrahou (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department) ;
  • Sofiane, Amziane (Clermont University, Institut Pascal, Polytech'Clermont-Ferrand) ;
  • Khalil, Belakhdar (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department) ;
  • Abdelouahed, Tounsi (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department) ;
  • Adda Bedia, El Abbes (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department)
  • 투고 : 2014.07.28
  • 심사 : 2014.04.03
  • 발행 : 2014.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

Repairing and strengthening structural members by bonding composite materials have received a considerable attention in recent years. The major problem when using bonded FRP or steel plates to strengthen existing structures is the high interfacial stresses that may be built up near the plate ends which lead to premature failure of the structure. As a result, many researchers have developed several analytical methods to predict the interface performance of bonded repairs under various types of loading. In this paper, a numerical solution using finite - difference method (FDM) is used to calculate the interfacial stress distribution in beams strengthened with FRP plate having a tapered ends under thermal loading. Different thinning profiles are investigated since the later can significantly reduce the stress concentration. In the present theoretical analysis, the adherend shear deformations are taken into account by assuming a parabolic shear stress through the thickness of both beam and bonded plate. The shear correction factor for I-section beams is also included in the solution. Numerical results from the present analysis are presented to demonstrate the advantages of use the tapers in design of strengthened beams.

키워드

참고문헌

  1. Arslan, G., Sevuk, F. and Ekiz, I. (2008), "Steel plate contribution to load-carrying capacity of retrofitted RC beams", Constr. Build. Mater., 22(3), 143-153. https://doi.org/10.1016/j.conbuildmat.2006.10.009
  2. Belakhdar, K., Tounsi, A., Benyoucef, S., Adda-Bedia E.A. and El Hassar, S.M. (2010), "On the reduction of the interfacial stresses in a repaired beam with an adhesively bonded frp plate", Compos. Interfaces, 17(1), 1-14. https://doi.org/10.1163/092764409X12580201111467
  3. Belakhdar, K., Tounsi, A., Adda Bedia, E. and Redha, Y. (2011), "Effect of tapered-end shape of FRP sheets on stress concentration in strengthened beams", Steel Compos. Struct., Int. J., 11(6), 435-454. https://doi.org/10.12989/scs.2011.11.6.435
  4. Benyoucef, S., Tounsi, A., Meftah, S.A. and Adda-Bedia, E.A. (2006), "Approximate analysis of the interfacial stress concentrations in FRP-RC hybrid beams", Compos. Interfaces, 13(7), 561-571. https://doi.org/10.1163/156855406778440758
  5. Benyoucef, S., Tounsi, A., Meftah, S.A. and Adda-Bedia, E.A. (2007), "Creep and shrinkage effect on adhesive stresses in RC beams strengthened with composite laminates", Compos. Sci. Technol., 67(6), 933-942. https://doi.org/10.1016/j.compscitech.2006.07.007
  6. Deng, J., Marcus, M.K.L. and Stuart, S.J.M. (2004), "Stress analysis of steel beams reinforced with a bonded CFRP plate", Compos. Struct., 65(2), 205-215. https://doi.org/10.1016/j.compstruct.2003.10.017
  7. Gao, B., Kim, J.K. and Leung, C.K.Y. (2006a), "Optimization of tapered end design for FRP strips bonded to RC beams", Compos. Sci. Technol., 66(10), 1266-1273. https://doi.org/10.1016/j.compscitech.2005.10.026
  8. Gao, B., Kim, J.K. and Leung, C.K.Y. (2006b), "Strengthening efficiency of taper ended FRP strips bonded to RC beams", Compos. Sci. Technol., 66(13), 2257-2264. https://doi.org/10.1016/j.compscitech.2005.12.002
  9. Gao, B., Kim, J.K. and Leung, C.K.Y. (2006c), "Effect of tapered FRP sheets on interlaminar fracture behaviour of FRP-concrete interface", Compos. Part A, 37(10), 1605-1612. https://doi.org/10.1016/j.compositesa.2005.10.010
  10. Hao, S.W., Liu, Y. and Liu, X.D. (2012), "Improved interfacial stress analysis of a plated beam", Struct. Eng. Mech., Int. J., 44(6), 815-837. https://doi.org/10.12989/sem.2012.44.6.815
  11. Jones, R., Swamy, R.N. and Charif, A. (1988), "Plate separation and anchorage of reinforced concrete beams strengthened by epoxy bonded steel plates", Struct. Eng., 66(5), 85-94.
  12. Krour, B., Bernard, F. and Tounsi, A. (2013), "Fibers orientation optimization for concrete beam strengthened with a CFRP bonded plate: A coupled analytical-numerical investigation", Eng. Struct., 56, 218-227. https://doi.org/10.1016/j.engstruct.2013.05.008
  13. Li, G. and Ghebreyesus, A. (2006), "Fast repair of damaged RC beams using UV curing FRP composites", Compos. Struct., 72(1), 105-110. https://doi.org/10.1016/j.compstruct.2004.10.020
  14. Malek, A.M., Saadatmanesh, H. and Ehsani, M.R. (1998), "Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end", ACI Struct. J., 95(2), 142-152.
  15. Mo, Y.L., Tsai, S.P. and Lee, I.S. (1998), "Seismic performance behaviour of beam - column connections in pre - stressed concrete bridges", J. Mater. Struct., 31(6), 411-417. https://doi.org/10.1007/BF02480715
  16. Oehlers, D.J. (1992), "Reinforced concrete beams with plates glued to their soffits", J. Struct. Eng. ASCE, 118(8), 2023-2038. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:8(2023)
  17. Panjehpour, M., Farzadnia, N., Anwar, M.P. and Ali, A.A.A. (2011), "FRP sheets contribution in common repair techniques of concrete structures with emphasis on concrete columns", Int. J. Sustain. Construct. Eng. Technol., 2(2), 54-61.
  18. Pesic, N. and Pilakoutas, K. (2005), "Flexural analysis and design of reinforced concrete beams with externally bonded FRP reinforcement", Mater. Struct., 38(2), 183-192. https://doi.org/10.1007/BF02479343
  19. Roberts, T.M. (1989), "Approximate analysis of shear and normal stress concentrations in adhesive layer of plated RC beams", Struct. Eng., 67(12), 229-233.
  20. Seible, F., Priestley, M.J.N., Hegemier, G.A. and Innamorato, D. (1997), "Seismic retrofit of RC columns with continuous carbon fibre jackets", J. Comp. Constr., 1(2), 52-62. https://doi.org/10.1061/(ASCE)1090-0268(1997)1:2(52)
  21. Smith, S.T. and Teng, J.G. (2001), "Interfacial stresses in plated RC beams", Eng. Struct., 23(7), 857-871. https://doi.org/10.1016/S0141-0296(00)00090-0
  22. Stratford, T. and Cadei, J. (2006), "Elastic analysis of adhesion stresses for the design of a strengthened plate bonded to a beam", Constr. Build.Mater., 20(1-2), 34-35. https://doi.org/10.1016/j.conbuildmat.2005.06.041
  23. Swamy, R.N., Jones, R. and Charif, A. (1989), "The effect of external plate reinforcement on the strengthening of structurally damaged RC beams", Struct. Engr., 67(3), 45-56.
  24. Tounsi, A. (2006), "Improved theoretical solution for interfacial stresses in concrete beams strengthened with FRP plate", Int. J. Solids Struct., 43(14-15), 4154-4174. https://doi.org/10.1016/j.ijsolstr.2005.03.074
  25. Tounsi, A. and Benyoucef, S. (2007), "Interfacial stresses in externally FRP plated concrete beams", Int. J. Adhes. Adhes., 27(3), 207-215. https://doi.org/10.1016/j.ijadhadh.2006.01.009
  26. Tounsi, A., Hassaine, T.D., Benyoucef, S. and Adda-Bedia, E.A, (2009), "Interfacial stresses in FRP-plated RC beams: Effect of adherend shear deformations", Int. J. Adhes. Adhes., 29(4), 343-351. https://doi.org/10.1016/j.ijadhadh.2008.06.008
  27. Tsai, M.Y., Oplinger, D.W. and Morton, J. (1998), "Improved theoretical solutions for adhesive lap joints", Int. J. Solids Struct., 35(12), 1163-1185. https://doi.org/10.1016/S0020-7683(97)00097-8
  28. Yang, J., Ye, J. and Niu, Z. (2007), "Interfacial shear stress in FRP-plated RC beams under symmetric loads", Cem. Concr. Compos., 29(5), 421-432. https://doi.org/10.1016/j.cemconcomp.2006.11.011
  29. Yang, J., Chen, J.F. and Teng, J.G. (2009), "Interfacial stress analysis of plated beams under symmetric mechanical and thermal loading", Construct. Build. Mater., 23(9), 2973-2987. https://doi.org/10.1016/j.conbuildmat.2009.05.004
  30. Yang, J. and Ye, J.Q. (2010), "An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach", Int. J. Mech. Sci., 52(1), 13-30. https://doi.org/10.1016/j.ijmecsci.2009.09.041
  31. Yuan, H. and Lin, Z. (2009), "Theoretical model on interface failure mechanism of reinforced concrete continuous beam strengthened by FRP", Acta Mech. Solida Sinica, 22(2), 161-170. https://doi.org/10.1016/S0894-9166(09)60101-4
  32. Zhu, Y. and Zhang, Y.X. (2010), "Nonlinear finite element analyses of FRP-reinforced concrete slabs using a new layered composite plate element", Comput. Mech., 46(3), 410-430.

피인용 문헌

  1. Minimum cost design of overhead crane beam with box section strengthened by CFRP laminates vol.61, pp.4, 2014, https://doi.org/10.12989/sem.2017.61.4.475