DOI QR코드

DOI QR Code

Packing density and filling effect of limestone fines

  • Kwan, A.K.H. (Department of Civil Engineering, The University of Hong Kong) ;
  • McKinley, M. (Department of Civil Engineering, The University of Hong Kong)
  • Received : 2013.10.30
  • Accepted : 2014.05.09
  • Published : 2014.11.27

Abstract

The use of limestone fines (LF) in mortar and concrete can in certain ways improve performance and thus has become more and more commonplace. However, although LF is generally regarded as a filler, it is up to now not clear how much filling effect it could have and how best the filling effect could be utilized. Herein, the packing density and filling effect of LF were studied by measuring the packing densities of LF, (LF + cement) blends and (LF + cement + fine aggregate) blends under dry and wet conditions, and measuring the performance of mortars made with various amounts of LF added. It was found that the addition of LF would not significantly increase the packing density of (LF + cement) blends but would fill into the paste to increase the paste volume and paste film thickness, and improve the flow spread and strength of mortar.

Keywords

References

  1. Bentz, D.P. (2005), "Replacement of "coarse" cement particles by inert fillers in low w/c ratio concretes; II: experimental validation", Cement Concrete Res., 35(1), 185-188. https://doi.org/10.1016/j.cemconres.2004.09.003
  2. Bentz, D.P. and Conway, J.T. (2001), "Computer modeling of the replacement of "coarse" cement particles by inert fillers in low w/c ratio concretes: hydration and strength", Cement Concrete Res., 31(3), 503-506. https://doi.org/10.1016/S0008-8846(01)00456-2
  3. Bentz, D.P., Irassar, E.F., Bucher, B. and Weiss, W.J. (2009), "Limestone fillers conserve cement in low w/cm concretes; an analysis based on Powers' model", Concrete Int., 31(11), 41-46.
  4. Bonavetti, V., Donza, H., Menendez, G., Cabrera, O. and Irassar, E.F. (2003), "Limestone filler cement in low w/c concrete: a rational use of energy", Cement Concrete Res., 33(6), 865-871. https://doi.org/10.1016/S0008-8846(02)01087-6
  5. British Standards Institution (1995), BS 812-2: 1995. Testing Aggregates: Methods of Determination of Density. British Standards Institution, UK.
  6. British Standards Institution (1998), BS EN 1097-3: 1998. Tests for Mechanical and Physical Properties of Aggregates: Determination of Loose Bulk Density and Voids. British Standards Institution, UK.
  7. British Standards Institution (2000), BS EN 197-1: 2000. Cement Composition, Specifications and Conformity Criteria for Common Cements. British Standards Institution, UK.
  8. British Standards Institution (2005), BS EN 196-1: 2005. Methods of Testing Cement: Determination of Strength. British Standards Institution, UK.
  9. British Standards Institution (2008), BS EN 1097-4: 2008. Tests for Mechanical and Physical Properties of Aggregates: Determination of the Voids of Dry Compacted Filler. British Standards Institution, UK.
  10. British Standards Institution (2010), BS EN 196-6: 2010. Methods of Testing Cement. Determination of Fineness. British Standards Institution, UK.
  11. Chen, J.J. and Kwan, A.K.H. (2012), "Adding limestone fines to reduce heat generation of curing concrete", Mag. Concrete Res., 64(12), 1101-1111. https://doi.org/10.1680/macr.11.00193
  12. Craeye, B., de Schutter, G., Desmet, B., Vantomme, J., Heirman, G., Vandewalle, L., Cizer, O., Aggoun, S. and Kadri, E.H. (2010), "Effect of mineral filler type on autogenous shrinkage of self-compacting concrete", Cement Concrete Res., 40(6), 908-913. https://doi.org/10.1016/j.cemconres.2010.01.014
  13. De Larrard, F. (1999), Concrete Mixture Proportioning: A Scientific Approach. E & FN Spon, New York, USA.
  14. Diederich, P., Mouret, M., de Ryck, A., Ponchon, F. and Escadeillas, G. (2012), "The nature of limestone filler and self-consolidating feasibility - relationships between physical, chemical and mineralogical properties of fillers and the flow at different states, from powder to cement-based suspension", Powder Tech., 218, 90-101. https://doi.org/10.1016/j.powtec.2011.11.045
  15. Fung, W.W.S. and Kwan, A.K.H. (2010), "Role of water film thickness in rheology of CSF mortar", Cement Concrete Compos., 32(4), 255-264. https://doi.org/10.1016/j.cemconcomp.2010.01.005
  16. Fung, W.W.S., Kwan, A.K.H. and Wong, H.H.C. (2009), "Wet packing of crushed rock fine aggregate", Mater. Struct., 42(5): 631-643. https://doi.org/10.1617/s11527-008-9409-3
  17. Kanazawa, K., Yamada, K. and Sogo, S. (1992), "Properties of low-heat generating concrete containing large volumes of blast-furnace slag and fly ash", Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete, ACI Special Publication SP-132, American Concrete Institute, USA, 97-118.
  18. Kwan, A.K.H., Chen, J.J. and Fung, W.W.S. (2012), "Effects of superplasticiser on rheology and cohesiveness of CSF cement paste", Adv. Cement Res., 24(3), 125-137. https://doi.org/10.1680/adcr.10.00020
  19. Kwan, A.K.H. and Fung, W.W.S. (2009), "Packing density measurement and modelling of fine aggregate and mortar", Cement Concrete Compos., 31(6), 349-357. https://doi.org/10.1016/j.cemconcomp.2009.03.006
  20. Kwan, A.K.H., Fung, W.W.S. and Wong, H.H.C. (2010), "Water film thickness, flowability and rheology of cement-sand mortar", Adv. Cement Res., 22(1), 3-14. https://doi.org/10.1680/adcr.2008.22.1.3
  21. Kwan, A.K.H. and Li, L.G. (2012), "Combined effects of water film thickness and paste film thickness on rheology of mortar", Mater. Struct., 45(9), 1359-1374. https://doi.org/10.1617/s11527-012-9837-y
  22. Kwan, A.K.H., McKinley, M. and Chen, J.J. (2013), "Adding limestone fines as cement paste replacement to reduce shrinkage of concrete", Mag. Concrete Res., 65(15), 942-950. https://doi.org/10.1680/macr.13.00028
  23. Kwan, A.K.H. and Wong, H.H.C. (2008a), "Packing density of cementitious materials: part 2 - packing and flow of OPC + PFA + CSF", Mater. Struct., 41(4), 773-784. https://doi.org/10.1617/s11527-007-9281-6
  24. Kwan, A.K.H. and Wong, H.H.C. (2008b), "Effects of packing density, excess water and solid surface area on flowability of cement paste", Adv. Cement Res., 20(1), 1-11. https://doi.org/10.1680/adcr.2008.20.1.1
  25. Lee, S.H., Kim, H.J., Sakai, E. and Daimon, M. (2003), "Effect of particle size distribution of fly ash-cement system on the fluidity of cement pastes", Cement Concrete Res., 33(5), 763-768. https://doi.org/10.1016/S0008-8846(02)01054-2
  26. Malhotra V.M. and Carette G.G. (1985) "Performance of concrete incorporating limestone dust as partial replacement for sand", J. Am. Concrete Inst., 82(3), 363-371.
  27. Mnahoncakova, E., Pavlikova, M., Grzeszczyk, S., Rovnanikova, P. and Cerny R. (2008), "Hydric, thermal and mechanical properties of self-compacting concrete containing different fillers", Construct. Build. Mater., 22(7), 1594-1600. https://doi.org/10.1016/j.conbuildmat.2007.03.016
  28. Nanthagopalan, P., Haist, M., Santhanam, M. and Muller, H.S. (2008), "Investigation on the influence of granular packing on the flow properties of cementitious suspensions", Cement Concrete Compos., 30(9), 763-768. https://doi.org/10.1016/j.cemconcomp.2008.06.005
  29. Nehdi, M., Mindess, S. and Aitcin, P.C. (1996), "Optimization of high strength limestone filler cement mortars", Cement Concrete Res., 26(6), 883-893. https://doi.org/10.1016/0008-8846(96)00071-3
  30. Okamura, H. and Ouchi, M. (2003), "Self-compacting concrete", J. Adv. Concrete Tech., 1(1), 5-15. https://doi.org/10.3151/jact.1.5
  31. Opoczky L. (1992), "Progress of particle size distribution during the intergrinding of a clinker-limestone mixture", Zement-Kalk-Gips, 45(12), 648-651.
  32. Soroka, I. and Setter, N. (1977), "The effect of fillers on strength of cement mortars", Cement Concrete Res., 7(4), 449-456. https://doi.org/10.1016/0008-8846(77)90073-4
  33. Sprung, S. and Siebel, E. (1991), "Assessment of the suitability of limestone for producing Portland limestone cement (PKZ)", Zement-Kalk-Gips, 44(1), 1-11.
  34. Svarovsky, L. (1987), Powder Testing Guide: Methods of Measuring the Physical Properties of Bulk Powders. Elsevier Applied Science Publishers Ltd, UK.
  35. Wong, H.H.C. and Kwan, A.K.H. (2008a), "Packing density of cementitious materials: part 1 - measurement using a wet packing method", Mater. Struct., 41(4), 689-701. https://doi.org/10.1617/s11527-007-9274-5
  36. Wong, H.H.C. and Kwan, A.K.H. (2008b), "Rheology of cement paste: role of excess water to solid surface area ratio", J. Mater. Civil Eng., 20(2), 189-197. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:2(189)

Cited by

  1. Mechanical properties and adiabatic temperature rise of low heat concrete using ternary blended cement vol.17, pp.2, 2016, https://doi.org/10.12989/cac.2016.17.2.271
  2. Fillers to lessen shear thickening of cement powder paste vol.142, 2017, https://doi.org/10.1016/j.conbuildmat.2017.03.076
  3. Evaluation on the durability of low heat concrete using ternary blended cement vol.18, pp.4, 2016, https://doi.org/10.12989/cac.2016.18.4.527
  4. Influence of packing density and water film thickness on early-age properties of cement pasteswith limestone filler and metakaolin vol.50, pp.2, 2017, https://doi.org/10.1617/s11527-016-0979-1
  5. Use of marble dust as paste replacement for recycling waste and improving durability and dimensional stability of mortar vol.166, pp.None, 2014, https://doi.org/10.1016/j.conbuildmat.2018.01.154
  6. Performance of self-compacting concrete with manufactured crushed sand vol.7, pp.2, 2014, https://doi.org/10.12989/acc.2019.7.2.087
  7. Effect of water film thickness on the flow in conventional mortars and concrete vol.52, pp.3, 2014, https://doi.org/10.1617/s11527-019-1362-9
  8. Reutilization of Clay Brick Waste in Mortar: Paste Replacement versus Cement Replacement vol.31, pp.7, 2014, https://doi.org/10.1061/(asce)mt.1943-5533.0002794
  9. Dilatancy mitigation of cement powder paste by pozzolanic and inert fillers vol.21, pp.3, 2014, https://doi.org/10.1002/suco.201900320