DOI QR코드

DOI QR Code

Predictive models of hardened mechanical properties of waste LCD glass concrete

  • Wang, Chien-Chih (Department of Civil Engineering and Geomatics, Cheng Shiu University) ;
  • Wang, Her-Yung (Department of Civil Engineering, National Kaohsiung University of Applied Sciences) ;
  • Huang, Chi (Department of Civil Engineering, National Kaohsiung University of Applied Sciences)
  • 투고 : 2014.06.09
  • 심사 : 2014.09.23
  • 발행 : 2014.11.28

초록

This paper aims to develop a prediction model for the hardened properties of waste LCD glass that is used in concrete by analyzing a series of laboratory test results, which were obtained in our previous study. We also summarized the testing results of the hardened properties of a variety of waste LCD glass concretes and discussed the effect of factors such as the water-binder ratio (w/b), waste glass content (G) and age (t) on the concrete compressive strength, flexural strength and ultrasonic pulse velocity. This study also applied a hyperbolic function, an exponential function and a power function in a non-linear regression analysis of multiple variables and established the prediction model that could consider the effect of the water-binder ratio (w/b), waste glass content (G) and age (t) on the concrete compressive strength, flexural strength and ultrasonic pulse velocity. Compared with the testing results, the statistical analysis shows that the coefficient of determination $R^2$ and the mean absolute percentage error (MAPE) were 0.93-0.96 and 5.4-8.4% for the compressive strength, 0.83-0.89 and 8.9-12.2% for the flexural strength and 0.87-0.89 and 1.8-2.2% for the ultrasonic pulse velocity, respectively. The proposed models are highly accurate in predicting the compressive strength, flexural strength and ultrasonic pulse velocity of waste LCD glass concrete. However, with other ranges of mixture parameters, the predicted models must be further studied.

키워드

참고문헌

  1. Ahmed, S.F.U. (2013), "Properties of concrete containing construction and demolition wastes and fly ash", J. Mater. Civ. Eng., ASCE, 25(12), 1864-1870. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000763
  2. Al-Shamrani, M.A. (2005), "Applying the hyperbolic method and Ca/Cc concept for settlement prediction of complex organic-rich soil formations", Eng. Geology, 77, 17-34. https://doi.org/10.1016/j.enggeo.2004.07.004
  3. Atis, C.D., Karahan, O., Ari, K., Sola, O.C. and Bilim, C. (2009), "Relation between Strength Properties (Flexuraland Compressive) and Abrasion Resistance of Fiber (Steel and Polypropylene)-Reinforced Fly Ash Concrete", J. Mater. Civ. Eng., ASCE, 21(8), 402-408. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:8(402)
  4. Barbuta, M., Diaconescu, R.M and Harja, M. (2012), "Using Neural Networks for Prediction of Properties of Polymer Concrete with Fly Ash", J. Mater. Civ. Eng., ASCE, 24(5), 523-528. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000413
  5. Boscardin, M.C., Selig, E.T., Lin, R.S. and Yang, G.R. (1990), "Hyperbolic parameters for compacted soils", Journal of Geotechnical Engineering, ASCE, 116 (1), 88-104. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:1(88)
  6. Cheng, A., Hsu, H.M., Chao, S.J. and Lin, K.L. (2011), "Experimental Study on Properties of Pervious Concrete Made with Recycled Aggregate", Int. J. Pav. Res. Technol. , 4(2), 104-110.
  7. Ciou, S.S. (2009), "A study on the high temperature properties of cement mortar with waste liquid crystal glass powder", Master Dissertation, National Kaohsiung University of Applied Sciences, Kaohsiung.
  8. Dapena, E., Alaejos, P., Lobet, A. and Perez, D. (2011), "Effect of Recycled Sand Content on Characteristics of Mortars and Concretes", J. Mater. Civ. Eng., ASCE, 23(4), 414-422. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000183
  9. Duncan, J.M. and Chang, C.Y. (1970), "Nonlinear analysis of stress and strain in soil", J. Soil Mech. Found. Div., ASCE, 96(SM5), 1629-1653.
  10. Gao, Y.Y., Liu, L.P. and Wang, Y.J. (2008), "LCD panel manufacturing waste resource status of Comment. Green Foundation newsletters", special reports.
  11. Huang, W.L. (2009), "A study on waste LCD glass applied in self-compacting concrete", Master Dissertation, National Kaohsiung University of Applied Sciences, Kaohsiung.
  12. Hwang, K., Noguchi, T. and Tomosawa, F. (1999), "Numerical prediction model for compressive strength development of concrete containing fly ash", J. Struct. Constr. Eng., Architect. Inst. Japan, 519, 1-6.
  13. Ismail, Z.Z. and Hashmi, E.A.A. (2009), "Recycling of waste glass as a partial replacement for fine aggregate in concrete", Waste Manage., 29, 655-659. https://doi.org/10.1016/j.wasman.2008.08.012
  14. Konder, R.L. (1963), "Hyperbolic stress-strain response: cohesive soils", J. Soil Mech. Found. Div., ASCE, 89 (1), 115-143.
  15. Kou, S.C. and Poon, C.S. (2009), "Properties of self-compacting concrete prepared with recycled glass aggregate", Cement Concrete Compos, 31, 107-113. https://doi.org/10.1016/j.cemconcomp.2008.12.002
  16. Kumar, B., Tike, G.K. and Nanda, P.K. (2007), "Evaluation of Properties of High-Volume Fly-Ash Concrete for Pavements", J. Mater. Civ. Eng., ASCE, 19(10), 906-911. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:10(906)
  17. Lewis, C.D. (1982), Industrial and Business Forecasting Method., London: Butterworth Scientific Publishers, London.
  18. Lin, K.L. (2007), "The effect of heating temperature of thin film transistor-liquid crystal display (TFT-LCD) electric-optical waste glass substitute partial clay as eco-brick", J. Cleaner Product., 15, 1755-1759. https://doi.org/10.1016/j.jclepro.2006.04.002
  19. Lin, K.L., Huang, W.J., Shie, J.L., Lee, T.C., Wang, K.S. and Lee, C.H. (2009), "The utilization of thin film transistor liquid crystal display waste glass as a pozzolanic material", J. Hazard. Mater, 163, 916-921. https://doi.org/10.1016/j.jhazmat.2008.07.044
  20. Lin, K.L., Shiu, H.S., Shie, J.L., Cheng, T.W. and Hwang, C.L. (2012), "Effect of composition on characteristics of thin film transistor liquid crystal display (TFT-LCD) waste glass-metakaolin -based geopolymers", Constr. Build. Mater., 36, 501-507. https://doi.org/10.1016/j.conbuildmat.2012.05.018
  21. Mousavi, S.M., Aminian, P., Gandomi, A.H., Alavi, A.H. and Bolandi, H. (2012), "New predictive model for compressive strength of HPC using gene expression programming", Adv. Eng. Softw., 45, 105-114. https://doi.org/10.1016/j.advengsoft.2011.09.014
  22. Murat, P., Erdogan, O., Ahmet, O. and Ishak Yuce, M. (2007), "Appraisal of long-term effects of fly ash and silica fume on compressive strength of concrete by neural networks", Constr. Build. Mater., 21, 384-394. https://doi.org/10.1016/j.conbuildmat.2005.08.009
  23. Park, S.B., Lee, B.C. and Kim, J.H. (2004), "Studies on mechanical properties of concrete containing waste glass aggregate", Cement Concrete Res., 34, 2181-2189. https://doi.org/10.1016/j.cemconres.2004.02.006
  24. Shah, A.A., Alsayed, S.H., Abbas, H. and Al-Salloum, Y.A. (2012), "Predicting residual strength of non-linear ultrasonically evaluated damaged concrete using artificial neural network", Constr. Build. Mater., 29, 42-50. https://doi.org/10.1016/j.conbuildmat.2011.10.038
  25. Sridharan, A. and Rao, S.N. (1972), "Hyperbolic representation of strength, pore pressures and volume changes with axial strain in triaxial tests", Proceedings of the Symposium on Strength and Deformation Behaviour of Soils, Bangalore, India, 33-42.
  26. Stark, T.D., Ebling, R.M. and Vettel, J.J. (1994), "Hyperbolic stress-strain parameters for silts", J. Geotech.Eng., ASCE, 120 (2), 420-441. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:2(420)
  27. Tang, C.W. (2014), "Producing synthetic lightweight aggregates by treating waste TFT-LCD glass powder and reservoir sediments", Comput. Concr., 13(2), 149-171. https://doi.org/10.12989/cac.2014.13.2.149
  28. Terro, M.J. (2006), "Properties of concrete made with recycled crushed glass at elevated temperatures", Build. Environ., 41, 633-639. https://doi.org/10.1016/j.buildenv.2005.02.018
  29. Topcu, I.B. and Canbaz, M. (2004), "Properties of concrete containing waste glass", Cement Concrete Res., 34, 267-274. https://doi.org/10.1016/j.cemconres.2003.07.003
  30. Vahid, K.A. and Mohammad, T. (2010), "Prediction of 28-day compressive strength of concrete on the third day using artificial neural networks", Int. J. Eng., 3(6), 565-576.
  31. Wang, C.C. (2001), "Time-dependent hyperbolic model for clayey soil", J. Chinese Inst. Civil Hydraulic Engineering ,Chinese, August.
  32. Wang, C.C., Chen, T.T., Wang, H.Y. and Huang, C. (2014), "A predictive model for compressive strength of waste LCD glass concrete by nonlinear-multivariate regression", Comput. Concr., 13(4), 531-545. https://doi.org/10.12989/cac.2014.13.4.531
  33. Wang, H.Y. (2009), "A study of the engineering properties of waste LCD glass applied to controlled low strength materials concrete", Constr. Build. Mater., 23, 2127-2131. https://doi.org/10.1016/j.conbuildmat.2008.12.012
  34. Wang, H.Y. (2011), "The effect of the proportion of thin film transistor-liquid crystal display (TFT-LCD) optical waste glass as a partial substitute for cement in cement mortar", Constr. Build. Mater., 25, 791-797. https://doi.org/10.1016/j.conbuildmat.2010.07.004
  35. Wang, H.Y. and Chen, J.S. (2008), "Study of thin film transition liquid crystal display(TFT-LCD) optical waste glass applied in early-high-strength controlled low strength materials", Comput. Concr., 5, 491-501. https://doi.org/10.12989/cac.2008.5.5.491
  36. Wang, H.Y. and Huang, W.L. (2010a), "A study on the properties of fresh self-consolidating glass concrete (SCGC)", Constr. Build. Mater., 24, 619-624. https://doi.org/10.1016/j.conbuildmat.2009.08.047
  37. Wang, H.Y. and Huang, W.L. (2010b), "Durability of self-consolidating concrete is using waste LCD glass", Constr. Build. Mater., 24, 1008-1013. https://doi.org/10.1016/j.conbuildmat.2009.11.018
  38. Wang, H.Y., Chen, J.S., Wang, S.Y., Chen, Z.C. and Chen, F.L. (2007), "A study on the mix proportion and properties of wasted LCD glass applied to controlled low strength materials concrete (CLSM)", J. Taiwan Concrete Institute.

피인용 문헌

  1. Modelling of the compressive strength development of cement mortar with furnace slag and desulfurization slag from the early strength vol.128, 2016, https://doi.org/10.1016/j.conbuildmat.2016.10.083
  2. Assessment of the compressive strength of recycled waste LCD glass concrete using the ultrasonic pulse velocity vol.137, 2017, https://doi.org/10.1016/j.conbuildmat.2017.01.117
  3. Study on the engineering properties and prediction models of an alkali-activated mortar material containing recycled waste glass vol.132, 2017, https://doi.org/10.1016/j.conbuildmat.2016.11.103
  4. Prediction models of compressive strength and UPV of recycled material cement mortar vol.19, pp.4, 2014, https://doi.org/10.12989/cac.2017.19.4.419
  5. Prediction model of resistivity and compressive strength of waste LCD glass concrete vol.19, pp.5, 2014, https://doi.org/10.12989/cac.2017.19.5.467
  6. Prediction of expansion of electric arc furnace oxidizing slag mortar using MNLR and BPN vol.20, pp.1, 2014, https://doi.org/10.12989/cac.2017.20.1.111
  7. Establishment of the Controlled Low-Strength Desulfurization Slag Prediction Model for Compressive Strength and Surface Resistivity vol.10, pp.16, 2014, https://doi.org/10.3390/app10165674
  8. Effective utilization of e-waste plastics and glasses in construction products - a review and future research directions vol.176, pp.None, 2014, https://doi.org/10.1016/j.resconrec.2021.105936