References
- Acar, M., & Wray, G. R. (1986). An analysis of the air-jet yarn-texturing process part : The effect of wetting the yarns, Journal of The Textile Institute, 77(6), 359-370. https://doi.org/10.1080/00405008608658432
- Chaithanya, R. (2002). Relationship between the processing parameters and tensile properties of air textured Kevlar yarns, Unpublished master's thesis, North Carolina State University, North Carolina.
- Choi, L. H., Kim, H. A. & Kim, S. J. (2013). Physical properties of aramid and aramid/nylon hybird ATY for protective garments relative to ATY nozzle diameter (ATY 노즐 직경에 따른 방호의류용 아라미드와 아라미드/나일론 하이브리드 ATY사의 물성변화), Fashion & Tex. Res. J., 15(3), 437-443. https://doi.org/10.5805/SFTI.2013.15.3.437
- Dani, N. (2004). The fundamentals of air-jet texturing, Unpublished doctoral dissertation, North Carolina State University, US.
- Demir, A., Acar, M., & Wray, G. R. (1986). Instability tests for air-jet textured yarns. Textile Research Journal, 56(3), 191-202. https://doi.org/10.1177/004051758605600306
- Kim, S. J., Park, M. R., Choi, R. H. & Ma, H. Y. (2011). The effect of the ATY processing condition on the physical properties of para-aramid/nylon hybrid fliament (건․습 텍스쳐링 가공조건이 방호의류용 Aramid ATY와 Aramid/Nylon hybrid 사의 물성에 미치는 영향), The 40th Textile Research Symposium, Kyoto(Japan).
- Kothari, V. K., Sengupta, A. K., & Goswami, B. C. (1991a). Role of water in air-jet texturing part I: Polyester filament feeder yarns with different frictional characteristics, Textile Research Journal, 61(9), 495-502. https://doi.org/10.1177/004051759106100901
- Kothari, V. K., Sengupta, A. K., & Goswami, B. C. (1991b). Role of water in air-jet texturing part II: Nylon 6 yarns conditioned in different environments, Textile Research Journal, 61(10), 575-580. https://doi.org/10.1177/004051759106101003
- Manich, A. M., Maillo, J., Cayuela, D., Gacen, J., Castellar, M. D., & Ussman, M. (2007). The effects of texturing induced microstructural changes on the relaxation behaviour of polyamide 66 multifilament yarns, Fibers and Polymers, 8(5), 512-519. https://doi.org/10.1007/BF02875874
- Park, M. R., Choi, L. H., Ma, H. Y. & Kim, S. J. (2012). Physical property of para-aramdi/nylon hybrid filament according to the ATY processing condition, Asian Textile Conference-11, Daegu, Exco(Korea).
- Park, M. R., Kim, H. A. & Kim, S. J. (2013). Physical properties of aramid and aramid/nylon hybrid ATY for Protective garments according to the dry and wet texturing conditions (건․습 텍스쳐링 가공조건이 방호의류용 Aramid ATY와 Aramid/Nylon hybrid 사의 물성에 미치는 영향), Fashion & Tex. Res. J., 15(3), 444-450. https://doi.org/10.5805/SFTI.2013.15.3.444
- Rengasamy, R. S., Kothari, V. K., & Patnaik, A. (2004). Effect of process variables and feeder yarn properties on the properties of core-and-effect and normal air-jet textured yarns. Textile Research Journal, 74(3), 259-264. https://doi.org/10.1177/004051750407400313
- Sengupta, A. K., Chatopadhyay, R., & Sensarma, J. K. (1992). Air-jet texturing of sirospun yarn. Textile Research Journal, 62(6), 328-334.
- Sengupta, A. K., Kothari, V. K., & Sensarma, J. K. (1996). Effect of filament modulus and linear density on the properties air-jet textured yarns. Textile Research Journal, 66(7), 452-455. https://doi.org/10.1177/004051759606600706
- Zhang, J., Zhang, Z., Wang, S., & Qin, X. (2007). Investigation on air texturing process for diacetate blending with polyester filaments. Fibers and Polymers, 8(4), 427-431. https://doi.org/10.1007/BF02875833
- Zhang, J., Zhang, Z., Wang, S., & Qin, X. (2007). Properties of core-and-effect air textured yarns blended by diacetate and polyester filament. Fibers and Polymers, 8(1), 84-88. https://doi.org/10.1007/BF02908164