DOI QR코드

DOI QR Code

마그네슘 합금 판재를 활용한 차체 Reinforced Dash 부품 온간성형 공정 연구

A Study on Warm Forming Technology of Car Body Reinforced Dash Using Magnesium Alloy Sheet

  • 투고 : 2014.06.03
  • 심사 : 2014.08.26
  • 발행 : 2014.10.15

초록

The use of light weight magnesium alloy offers significant potential towards improvement of the automotive fuel efficiency. However, the application of formed magnesium alloy components in auto-body structures is restricted due to the low formability at room temperature and lack of knowledge for processing magnesium alloys at elevated temperatures. In this study, a warm tensile test of magnesium alloys was performed to measure tensile strength and elongation. An improvement in formability was confirmed at increased temperatures above about $250^{\circ}C$. Car body warm forming technology was conducted for forming forming reinforced dash components of the magnesium alloy AZ31B sheet at elevated temperatures.

키워드

참고문헌

  1. Lee, M. C., Oh, J. H., Oh, S. Y., Moon, M. S., Kim, E. S., Yang, S. M., Kang, S. J., 2013, A Study on Optimal Manufacturing Design of Mg Armrest Frame, Proceedings of the KSMTE Spring Conference 108.
  2. Lee, M. G., Kim, H. J., 2011, Experimental and Analytical Evaluation of Forming Characteristics for AZ31B Magnesium Alloy Sheet, Journal of the KSTP 20:2 146-153. https://doi.org/10.5228/KSTP.2011.20.2.146
  3. Hor, K. W., Su, C. M., Kim, J. H., Kim, H. M., Do, R. M., 2012, Study about optimal temperature conditions analysis and fatigue life according to temperature for hot forming of AZ31 magnesium alloy, Proceedings of the KSMTE Spring Conference 214.
  4. Kim, S. H., Park, K. D., Jang, J. H., Kim, K. T., Lee, H. W., Lee, G. A., Lee, K. P., Lee, Y. S., 2008, Experimental and Analytical Researches on Mechanical Properties Related to Formability of AZ31B Alloy Sheet, Proceedings of the KSTP Spring Conference 366-369.
  5. Lee, M. H., Kim, H. G., 2008, Evaluation of the Formability of Warm Forming Simulation of Magnesium Alloy Sheet Using FLD, Journal of the KSTP 17:7 501-506. https://doi.org/10.5228/KSPP.2008.17.7.501
  6. Lee, W. R., Kim, H. K., Kim, J. D., Han, B. K., 2005, A Study on the Mg sheet formability for the warm press forming, Proceedings of the KSME Spring Conference 1442-1447.
  7. Oh, S. W., Choo, D. K., Lee, J. H., Kang, C. G., 2005, Estimation of Mechanical Properties of Mg Alloy at High Temperature by Tension and Compression Test, Proceedings of the KSTP Spring Conference 69-72.
  8. Kim, H. Y., Choi, S. C., Lee, H. S., Kim, H. J., Lee, K. T., 2007, Experiments for Forming Limit Diagram and Springback Characteristics of AZ31B Magnesium Alloy Sheet at Elevated Temperature, ournal of the KSTP 16:5, 364-369. https://doi.org/10.5228/KSPP.2007.16.5.364

피인용 문헌

  1. Heat Shields Fused with Embossed and Press Formed Al Alloy Sheets for Automobiles vol.29, pp.4, 2014, https://doi.org/10.7735/ksmte.2020.29.4.274