Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Effects of infilled concrete and longitudinal rebar on flexural performance of composite PHC pile

  • Bang, Jin Wook (Department of Civil Engineering, Chungnam National University) ;
  • Lee, Bang Yeon (School of Architecture, Chonnam National University) ;
  • Lee, Byung Jae (R&D Center, JNTINC Co., Ltd.) ;
  • Hyun, Jung Hwan (Department of Civil Engineering, Chungnam National University) ;
  • Kim, Yun Yong (Department of Civil Engineering, Chungnam National University)
  • Received : 2014.05.09
  • Accepted : 2014.07.28
  • Published : 2014.11.25
⟨ Previous Next ⟩

Abstract

Concrete infill and reinforcement are one of the most well-known strengthening methods of structural elements. This study investigated flexural performance of concrete infill composite PHC pile (ICP pile) reinforced by infill concrete and longitudinal rebars in hollow PHC pile. A total four series of pile specimens were tested by four points bending method under simply supported conditions and investigated bending moment experimentally and analytically. From the test results, it was found that although reinforcement of infilled concrete on the pure bending moment of PHC pile was negligible, reinforcement of PHC pile using infilled concrete and longitudinal rebars increase the maximum bending moment with range from 1.95 to 2.31 times than that of conventional PHC pile. The error of bending moment between experimental results and predicted results by nonlinear sectional analysis on the basis of the conventional layered sectional approach was in the range of -2.54 % to 2.80 %. The axial compression and moment interaction analysis for ICP piles shows more significant strengthening effects of infilled concrete and longitudinal rebars.

Keywords

Acknowledgement

Supported by : National Research Foundation of Korea (NRF)

References

  1. Bang, J.W., Hyun, J.H., Lee, B.Y. and Kim, Y.Y. (2014), "Cyclic behavior of connection between footing and concrete-infilled composite PHC pile", Struct. Eng. Mech, 50(6), 603-617.
  2. Bhowmik, D., Baidya, D.K. and Dasgupta, S.P. (2013). "A numerical and experimental study of hollow steel pile in layered soil subjected to lateral dynamic loading", J. Soil Dyn. Earthq. Eng., 53, 119-129. https://doi.org/10.1016/j.soildyn.2013.06.011
  3. Chun, Y.S., Park, J.B. and Sim, Y.J. (2010), "Mechanical properties of PHC pile head connection with foundation slab and field application", Mag. Korea Concrete Inst., 22(5), 71-77.
  4. Gary, L.H. (2006), Behavior of Fiber-Reinforced Polymer Composite Piles Under Vertical Loads, Federal Highway Administration, Mclean, VA, USA.
  5. Guades, E., Aravinthan, T., Islam, M. and Manalo, A. (2012), "A review on the driving performance of FRP composite piles", Compos. Struct., 94(6), 1932-1942. https://doi.org/10.1016/j.compstruct.2012.02.004
  6. Hyun, J.H., Bang, J.W., Lee, S.S. and Kim, Y.Y. (2012) "Shear strength enhancement of hollow PHC pile reinforced with ininfilled concrete and shear reinforcement", J. Korea Concrete Inst., 24(1), 71-78. https://doi.org/10.4334/JKCI.2012.24.1.071
  7. Iskander, M. and Hassan, M. (1998) "State of the practice review in FRP composite piling", J. Compos. Construct., ASCE, 2(3), 116-120. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:3(116)
  8. Kim, Y.S., Lee, J.B., Kim, S.K. and Lee, J.H. (2009), "Development of an automated machine for PHC pile head grinding and crushing work", Autom. Const., 18, 737-750. https://doi.org/10.1016/j.autcon.2009.02.008
  9. Korean agency for Technology and Standards F 4306 (2003), "Pretensioned spun high strength concrete piles", 1-16.
  10. Lee, J.D. and Lee, H. (2007), "The performance evaluation of hybrid composite pile connections", Mag. Korea Concrete Inst., 19(3), 51-56.
  11. Lee, K.Y., Park, Y.D., Chung, W.Y., Choi, Y.D. and Kim, H.S. (2009), "Evaluation of structural performance and field application in composite pile", Proceeding of the Korean society for Railway, 2173-2180.
  12. Li, G.W., Pei, H.F., Yin, J.H., Lu, X.C. and Teng, J. (2014). "Monitoring and analysis of PHC pipe piles under hydraulic jacking using FBG sensing technology", Measurement, 49, 358-367. https://doi.org/10.1016/j.measurement.2013.11.046
  13. Meyerhof, G.G. (1976), "Bearing capacity and settlement of pile foundations", J. Geotech. Eng. Div., ASCE, 102(3), 195-228.
  14. Mha, H.S., Won, J.H. and Cho, H.S. (2012), "A study on flexural behavior of composite PHC pile with CT structural steel", J. Korean Soc. Steel Constr., 24(2), 233-243. https://doi.org/10.7781/kjoss.2012.24.2.233
  15. Mirmiran, A. and Shahawy, M. (1996), "A new concrete-filled hollow FRP composite column", Compos. Part B, 27(1), 263-268.
  16. Mirmiran, A., Shao, Y. and Shahawy, M. (2002), "Analysis and field tests on the performance of composite tubes under pile driving impact", Compos. Struct., 55(2), 127-135. https://doi.org/10.1016/S0263-8223(01)00140-4
  17. Oluokun, F. (1991) "Prediction of concrete tensile strength from its compressive strength: evaluation of existing relations for normal weight concrete", J. ACI Mater., 88(3), 302-309.
  18. Song, T.E. (2008), "Decision procedure in applying PHC piles instead of steel plies", Mag. Ssangyong Eng. Const., 48, 32-36.

Cited by

  1. Flexural Behavior of Large-Diameter Composite PHC pile Using In-Filled Concrete and Reinforcement vol.20, pp.5, 2016, https://doi.org/10.11112/jksmi.2016.20.5.109
  2. Pile-cap Connection Behavior Dependent on the Connecting Method between PHC pile and Footing vol.20, pp.3, 2016, https://doi.org/10.11112/jksmi.2016.20.3.025
  3. 말뚝머리 중공 프리캐스트 철근콘크리트 말뚝의 성능 평가 vol.21, pp.2, 2014, https://doi.org/10.11112/jksmi.2017.21.2.130
  4. 속채움 콘크리트와 전단철근을 사용한 대구경 합성 PHC말뚝의 전단보강 성능 vol.21, pp.6, 2014, https://doi.org/10.11112/jksmi.2017.21.6.067
  5. Flexural and shear behavior of large diameter PHC pile reinforced by rebar and infilled concrete vol.25, pp.1, 2014, https://doi.org/10.12989/cac.2020.25.1.075