Structural Engineering and Mechanics

  • 제52권4호
  • /
  • Pages.755-765
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Buckling load optimization of laminated plates via artificial bee colony algorithm

  • Topal, Umut (Department of Civil Engineering, Faculty of Technology, Karadeniz Technical University) ;
  • Ozturk, Hasan Tahsin (Department of Civil Engineering, Faculty of Technology, Karadeniz Technical University)
  • 투고 : 2014.03.06
  • 심사 : 2014.06.20
  • 발행 : 2014.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this present work, Artificial Bee Colony Algorithm (ABCA) is used to optimize the stacking sequences of simply supported antisymmetric laminated composite plates with criticial buckling load as the objective functions. The fibre orientations of the layers are selected as the optimization design variables with the aim to find the optimal laminated plates. In order to perform the optimization based on the ABCA, a special code is written in MATLAB software environment. Several numerical examples are presented to illustrate this optimization algorithm for different plate aspect ratios, number of layers and load ratios.

키워드

참고문헌

  1. Ahmadian, M.R., Vincenti, A. and Vannucci, P. (2011), "A general strategy for the optimal design of composite laminates by the polar-genetic method", Mater. Des., 32, 2317-2327. https://doi.org/10.1016/j.matdes.2010.08.036
  2. Correia, V.M.F., Soares, C.M.M. and Soares, A.C.M. (2003), "Buckling optimization of composite laminated adaptive structures", Compos. Struct., 62, 315-321. https://doi.org/10.1016/j.compstruct.2003.09.030
  3. De Faria, A. (2002), "Buckling optimization and antioptimization of composite plates: uncertain loading combinations", Int. J. Numer. Meth. Eng., 53, 719-732. https://doi.org/10.1002/nme.309
  4. Honda, S., Narita, Y. and Sasaki, K. (2007), "Optimization for the maximum buckling loads of laminated composite plates-comparison of various design methods", Key Eng. Mater., 334-335, 89-92. https://doi.org/10.4028/www.scientific.net/KEM.334-335.89
  5. Honda, S. and Narita, Y. (2006), "Buckling optimization of laminated composite plates by minimizing errors of the discrete lamination parameters", Tran. Japan Soc. Mech. Eng.,72, 1262-1269. https://doi.org/10.1299/kikaia.72.1262
  6. Iyengar, N.G.R. and Vyas, N. (2011), "Optimum design of laminated composite under axial compressive load", Sadhana, 36, 73-85. https://doi.org/10.1007/s12046-011-0009-5
  7. Karaboga, D. and Akay, B. (2009), "A comparative study of artificial bee colony algorithm", App. Math. Comput., 214, 108-132. https://doi.org/10.1016/j.amc.2009.03.090
  8. Karaboga, D. and Basturk, B. (2007), "A powerful and efficient algorithm for numerical function optimization: Artificial bee colony (ABC) algorithm", J. Global Optim., 39, 459-471. https://doi.org/10.1007/s10898-007-9149-x
  9. Karakaya, S. and Soykasap, O. (2009), "Buckling optimization of laminated composite plates using genetic algorithm and generalized pattern search algorithm", Struct. Multidiscip. Optim., 39, 477-486. https://doi.org/10.1007/s00158-008-0344-2
  10. Lingaard, E. and Lund, E. (2011), "Optimization formulations for the maximum nonlinear buckling load of composite structures", Struct. Multidiscip. Optim., 43, 631-646. https://doi.org/10.1007/s00158-010-0593-8
  11. Narita, Y. and Turvey, G.J. (2004), "Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimization approach", J. Mech. Eng. Sci., 218, 681-691. https://doi.org/10.1243/0954406041319554
  12. Raju, B.M.V.A., Srinivasa, R.T.V. and Mantha, V. (2012), "Buckling design optimisation of composite laminated plates using differential evolution algorithm approach", Int. J. Theoretical. App. Multiscale Mech., 2, 255-270. https://doi.org/10.1504/IJTAMM.2012.049965
  13. Rao, A.R.M. and Arvind, N. (2007), "Optimal stacking sequence design of laminate composite structures using tabu embedded simulated annealing", Struct. Eng. Mech., 25, 239-268. https://doi.org/10.12989/sem.2007.25.2.239
  14. Reddy, J.N. (2004), Mechanics of Laminated Composite Plates and Shells, Theory and Analysis, CRC Press, Second edition, New York, USA.
  15. Sebaey, T.A., Lopes, C.S., Blanco, N. and Costa, J. (2011), "Ant colony optimization for dispersed laminated composite panels under biaxial loading", Compos. Struct., 94, 31-36. https://doi.org/10.1016/j.compstruct.2011.07.021
  16. Ozturk, H.T. and Durmus, A. (2013), "Optimum cost design of RC columns using artificial bee colony algorithm", Struct. Eng. Mech., 45, 639-650.
  17. Wu, Z., Weaver, P.M., Raju, G. and Kim, B.C. (2012), "Buckling analysis and optimisation of variable angle tow composite plates", Thin Wall. Struct., 60, 163-172. https://doi.org/10.1016/j.tws.2012.07.008

피인용 문헌

  1. Optimal placement of elastic steel diagonal braces using artificial bee colony algorithm vol.19, pp.2, 2015, https://doi.org/10.12989/scs.2015.19.2.349
  2. An approach for the Pasternak elastic foundation parameters estimation of beams using simulated frequencies 2017, https://doi.org/10.1080/17415977.2017.1377707
  3. Structural failure classification for reinforced concrete buildings using trained neural network based multi-objective genetic algorithm vol.63, pp.4, 2014, https://doi.org/10.12989/sem.2017.63.4.429
  4. Buckling load optimization of laminated plates resting on Pasternak foundation using TLBO vol.67, pp.6, 2018, https://doi.org/10.12989/sem.2018.67.6.617
  5. Optimal design of the transversely vibrating Euler-Bernoulli beams segmented in the longitudinal direction vol.44, pp.5, 2019, https://doi.org/10.1007/s12046-019-1084-2
  6. An investigation of non-linear optimization methods on composite structures under vibration and buckling loads vol.5, pp.3, 2014, https://doi.org/10.12989/acd.2020.5.3.209