DOI QR코드

DOI QR Code

Free vibration analysis of bidirectional functionally graded annular plates resting on elastic foundations using differential quadrature method

  • Tahouneh, Vahid (Department of Mechanical Engineering, Islamshahr Branch, Islamic Azad University)
  • 투고 : 2013.12.01
  • 심사 : 2014.04.03
  • 발행 : 2014.11.25

초록

This paper deals with free vibration analysis of bidirectional functionally graded annular plates resting on a two-parameter elastic foundation. The formulations are based on the three-dimensional elasticity theory. This study presents a novel 2-D six-parameter power-law distribution for ceramic volume fraction of 2-D functionally graded materials that gives designers a powerful tool for flexible designing of structures under multi-functional requirements. Various material profiles along the thickness and in the in-plane directions are illustrated by using the 2-D power-law distribution. The effective material properties at a point are determined in terms of the local volume fractions and the material properties by the Mori-Tanaka scheme. The 2-D differential quadrature method as an efficient and accurate numerical tool is used to discretize the governing equations and to implement the boundary conditions. The fast rate of convergence of the method is shown and the results are compared against existing results in literature. Some new results for natural frequencies of the plates are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. The interesting results indicate that a graded ceramic volume fraction in two directions has a higher capability to reduce the natural frequency than conventional 1-D functionally graded materials.

키워드

참고문헌

  1. Allahverdizadeh, A., Naei, M.H. and Nikkhah Bahrami M. (2008), "Nonlinear free and forced vibration analysis of thin circular functionally graded plates", J. Sound Vib., 310(4-5), 966-984. https://doi.org/10.1016/j.jsv.2007.08.011
  2. Amini, M.H., Soleimani, M. and Rastgoo, A. (2009), "Three-dimensional free vibration analysis of functionally graded material plates resting on an elastic foundation", Smart Mater. Struct., 18(8), 085015. https://doi.org/10.1088/0964-1726/18/8/085015
  3. Bellman, R. and Casti, J. (1971), "Differential quadrature and long term integration", J. Math. Anal. Appl., 34(2), 235-238. https://doi.org/10.1016/0022-247X(71)90110-7
  4. Benveniste, Y. (1987), "A new approach to the application of Mori-Tanaka's theory of composite materials", Mech. Mater., 6(2), 147-157. https://doi.org/10.1016/0167-6636(87)90005-6
  5. Bert, C.W. and Malik, M. (1996), "Differential quadrature method in computational mechanics, a review", Appl. Mech. Rev., 49(1), 1-27. https://doi.org/10.1115/1.3101882
  6. Columbia Accident Investigation Board (2003a), Report of Columbia Accident Investigation Board, Vol. I. NASA.
  7. Columbia Accident Investigation Board (2003b), In-Flight Options Assessment, Vol. II. NASA, Appendix D.12 (PDF).
  8. Dasgupta, A. and Bhandarkar, S.M. (1992), "A generalized self-consistent Mori-Tanaka scheme for fibercomposites with multiple inter-phases", Mech. Mater., 14(1), 67-82. https://doi.org/10.1016/0167-6636(92)90019-A
  9. Dong, C.Y. (2008), "Three-dimensional free vibration analysis of functionally graded annular plates using the Chebyshev-Ritz method", Mater. Des., 29(8), 1518-1525. https://doi.org/10.1016/j.matdes.2008.03.001
  10. Ebrahimi, F. and Rastgo, A. (2008), "An analytical study on the free vibration of smart circular thin FGM plate based on classical plate theory", Thin Walled Struct., 46(12), 1402-1408. https://doi.org/10.1016/j.tws.2008.03.008
  11. Efraim, E. and Eisenberger, M. (2007), "Exact vibration analysis of variable thickness thick annular isotropic and FGM plates", J. Sound Vib., 299(4-5), 720-738. https://doi.org/10.1016/j.jsv.2006.06.068
  12. Eraslan, A.N. and Akis, T. (2009), "On the plane strain and plane stress solutions of functionally graded rotating solid shaft and solid disk problems", Acta Mech., 181(1-2), 43-63.
  13. Genin, G.M. and Birman, V. (2009), "Micromechanics and Structural Response of Functionally Graded, Particulate-Matrix, Fiber-Reinforced Composites", Int. J. Solids Struct., 46(10), 2136-2150. https://doi.org/10.1016/j.ijsolstr.2008.08.010
  14. Gupta, U.S., Lal, R. and Jain, S.K. (1990), "Effect of elastic foundation on axisymmetric vibrations of polar orthotropic circular plates of variable thickness", J. Sound Vib., 139(3), 503-513. https://doi.org/10.1016/0022-460X(90)90679-T
  15. Gupta, U.S., Lal, R. and Sharma, S. (2006), "Vibration analysis of non-homogeneous circular plate of nonlinear thickness variation by differential quadrature method", J. Sound Vib., 298(4-5), 892-906. https://doi.org/10.1016/j.jsv.2006.05.030
  16. Hosseini Hashemi, S., Omidi, M. and Rokni Damavandi Taher, H. (2009), "The validity range of CPT and Mindlin plate theory in comparison with 3-D vibration analysis of circular plates on the elastic foundation", Eur. J. Mech. A Solids, 28(3-5), 289-304. https://doi.org/10.1016/j.euromechsol.2008.07.012
  17. Hosseini Hashemi, S., Rokni Damavandi Taher, H. and Akhavan, H. (2010), "Vibration analysis of radially FGM sectorial plates of variable thickness on elastic foundations", Compos. Struct., 92(7), 1734-1743. https://doi.org/10.1016/j.compstruct.2009.12.016
  18. Hosseini Hashemi, S., Rokni Damavandi Taher, H. and Omidi, M. (2008), "3-D free vibration analysis of annular plates on Pasternak elastic foundation via p-Ritz method", J. Sound Vib., 311(3), 1114-1140. https://doi.org/10.1016/j.jsv.2007.10.020
  19. Hu, G.K. and Weng, G.J. (2000), "The Connections between the double-inclusion model and the Ponte Castaneda- Willis, Mori-Tanaka, and Kuster-Toksoz models", Mech. Mater., 32(8), 495-503. https://doi.org/10.1016/S0167-6636(00)00015-6
  20. Liew, K.M. and Liu, F.L. (2000), "Differential quadrature method for vibration analysis of shear deformable annular sector plates", J. Sound Vib., 230(2), 335-356. https://doi.org/10.1006/jsvi.1999.2623
  21. Liew, K.M., Han, J.B., Xiao, Z.M. and Du, H. (1996), "Differential quadrature method for Mindlin plates on Winkler foundation", Int. J. Mech. Sci., 38(4), 405-421. https://doi.org/10.1016/0020-7403(95)00062-3
  22. Liu, F.L. and Liew, K.M. (1999), "Free vibration analysis of Mindlin sector plates numerical solutions by differential quadrature method", Comput. Meth. Appl. Mech. Eng., 177(1-2), 77-92. https://doi.org/10.1016/S0045-7825(98)00376-4
  23. Malekzadeh, P. (2009), "Three-dimensional free vibration analysis of thick functionally graded plates on elastic foundations", Compos. Struct., 89(3), 367-373. https://doi.org/10.1016/j.compstruct.2008.08.007
  24. Malekzadeh, P. and Karami, G. (2004), "Vibration of non-uniform thick plates on elastic foundation by differential quadrature method", Eng. Struct., 26(10), 1473-1482. https://doi.org/10.1016/j.engstruct.2004.05.008
  25. Matsunaga, H. (2000), "Vibration and stability of thick plates on elastic foundations", J. Eng. Mech., ASCE, 126(1), 27-34. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:1(27)
  26. Ming Hung, H. (2010), "Vibration analysis of orthotropic rectangular plates on elastic foundations", Compos. Struct., 92(4), 844-852. https://doi.org/10.1016/j.compstruct.2009.09.015
  27. Mori, T. and Tanaka, K. (1973), "Average stress in matrix and average elastic energy of materials with misfitting inclusions", Acta Metall., 21(5), 571-574. https://doi.org/10.1016/0001-6160(73)90064-3
  28. Nie, G.J. and Zhong, Z. (2007), "Semi-analytical solution for three-dimensional vibration of functionally graded circular plates", Comput. Mech. Appl., 196(49-52), 4901-4910. https://doi.org/10.1016/j.cma.2007.06.028
  29. Nie, G.J. and Zhong, Z. (2010), "Dynamic analysis of multi-directional functionally graded annular plates", Appl. Math. Modell., 34(3), 608-616. https://doi.org/10.1016/j.apm.2009.06.009
  30. Ponnusamy, P. and Selvamani, R. (2012), "Wave propagation in a generalized thermo elastic plate embedded in elastic medium", IMM, An Int. J., 5(1), 13-26.
  31. Prakash, T. and Ganapathi, M. (2006), "Asymmetric flexural vibration and thermoelastic stability of FGM circular plates using finite element method", Compos Part B, 37(7-8), 642-649. https://doi.org/10.1016/j.compositesb.2006.03.005
  32. Shafiee, A.A., Daneshmand, F., Askari, E., Mahzoon, M. (2014), "Dynamic behavior of a functionally graded plate resting on Winkler elastic foundation and in contact with fluid", Struct. Eng. Mech., 50(1), 53-71. https://doi.org/10.12989/sem.2014.50.1.053
  33. Shu, C. (2000), Differential Quadrature and its Application in Engineering, Springer, Berlin, Germany.
  34. Shu, C. and Wang, C.M. (1999), "Treatment of mixed and nonuniform boundary conditions in GDQ vibration analysis of rectangular plates", Eng. Struct., 21(2), 125-134. https://doi.org/10.1016/S0141-0296(97)00155-7
  35. Sobhani Aragh, B. and Yas, M.H. (2010), "Static and free vibration analyses of continuously graded fiberreinforced cylindrical shells using generalized power-law distribution", Acta Mech., 215(1-4), 155-173. https://doi.org/10.1007/s00707-010-0335-4
  36. Tahouneh, V. and Yas, M.H. (2012), "3-D free vibration analysis of thick functionally graded annular sector plates on Pasternak elastic foundation via 2-D differential quadrature method", Acta Mech., 223(9), 1879-1897. https://doi.org/10.1007/s00707-012-0648-6
  37. Tornabene, F. (2009), "Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution", Comput. Meth. Appl. Mech. Eng., 198(37-40), 2911-2935. https://doi.org/10.1016/j.cma.2009.04.011
  38. Vel, S.S. (2010), "Exact elasticity solution for the vibration of functionally graded anisotropic cylindrical shells", Compos. Struct., 92(11), 2712-2727. https://doi.org/10.1016/j.compstruct.2010.03.012
  39. Vel, S.S. and Batra, R.C. (2002), "Exact solution for thermoelastic deformations of functionally graded thick rectangular plates", AIAA, 40(7), 1421-1433. https://doi.org/10.2514/2.1805
  40. Wang, X. and Wang, Y. (2004), "Free vibration analyses of thin sector plates by the new version of differential quadrature method", Comput. Meth. Appl. Mech. Eng., 193(36-38), 3957-3971. https://doi.org/10.1016/j.cma.2004.02.010
  41. Xiang, Y., Kitipornchai, S. and Liew, K.M. (1996), "Buckling and vibration of thick laminates on Pasternak foundations", J. Eng. Mech., ASCE, 122(1), 54-63. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:1(54)
  42. Xiang, Y., Wang, C.M. and Kitipornchai, S. (1994), "Exact vibration solution for initially stressed Mindlin plates on Pasternak foundations", Int. J. Mech. Sci., 36(4), 311-316. https://doi.org/10.1016/0020-7403(94)90037-X
  43. Yas, M.H. and Sobhani Aragh, B. (2010), "Free vibration analysis of continuous grading fiber reinforced plates on elastic foundation", Int. J. Eng. Sci., 48(12), 1881-1895. https://doi.org/10.1016/j.ijengsci.2010.06.015
  44. Zhou, D., Cheung, Y.K., Lo, S.H. and Au, F.T.K. (2004), "Three-dimensional vibration analysis of rectangular thick plates on Pasternak foundation", Int. J. Numer. Meth. Eng., 59(10), 1313-1334. https://doi.org/10.1002/nme.915
  45. Zhou, D., Lo, S.H., Au, F.T.K .and Cheung, Y.K. (2006), "Three-dimensional free vibration of thick circular plates on Pasternak foundation", J. Sound Vib., 292(3-5), 726-741. https://doi.org/10.1016/j.jsv.2005.08.028

피인용 문헌

  1. Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation 2017, https://doi.org/10.1177/0954406217720823
  2. Vibration of axially moving 3-phase CNTFPC plate resting on orthotropic foundation vol.57, pp.1, 2016, https://doi.org/10.12989/sem.2016.57.1.105
  3. Using an equivalent continuum model for 3D dynamic analysis of nanocomposite plates vol.20, pp.3, 2016, https://doi.org/10.12989/scs.2016.20.3.623
  4. The effects of carbon nanotube waviness and aspect ratio on the buckling behavior of functionally graded nanocomposite plates using a meshfree method vol.38, 2017, https://doi.org/10.1002/pc.23814
  5. 3D free vibration analysis of elastically supported thick nanocomposite curved panels with finite length and different boundary conditions via 2D GDQ method vol.23, pp.10, 2016, https://doi.org/10.1080/15376494.2015.1068402
  6. Nonlinear free and forced vibration analysis of FG-CNTRC annular sector plates pp.02728397, 2019, https://doi.org/10.1002/pc.24998
  7. Vibrational analysis of sandwich sectorial plates with functionally graded sheets reinforced by aggregated carbon nanotube pp.1530-7972, 2020, https://doi.org/10.1177/1099636218785972
  8. An analytical approach for free vibrations analysis of viscoelastic circular and annular plates using FSDT pp.1537-6532, 2020, https://doi.org/10.1080/15376494.2018.1472348
  9. Free vibration analysis of elastically restrained functionally graded curved beams based on the Mori–Tanaka scheme pp.1537-6532, 2019, https://doi.org/10.1080/15376494.2018.1452318
  10. Using modified Halpin-Tsai approach for vibrational analysis of thick functionally graded multi-walled carbon nanotube plates vol.23, pp.6, 2014, https://doi.org/10.12989/scs.2017.23.6.657
  11. Free vibration behavior of viscoelastic annular plates using first order shear deformation theory vol.62, pp.5, 2014, https://doi.org/10.12989/sem.2017.62.5.607
  12. The effect of carbon nanotubes agglomeration on vibrational response of thick functionally graded sandwich plates vol.24, pp.6, 2014, https://doi.org/10.12989/scs.2017.24.6.711
  13. Vibration and mode shape analysis of sandwich panel with MWCNTs FG-reinforcement core vol.25, pp.3, 2017, https://doi.org/10.12989/scs.2017.25.3.347
  14. Dynamic response of functionally graded annular/circular plate in contact with bounded fluid under harmonic load vol.65, pp.5, 2018, https://doi.org/10.12989/sem.2018.65.5.523
  15. Quasi-3D static analysis of two-directional functionally graded circular plates vol.27, pp.6, 2014, https://doi.org/10.12989/scs.2018.27.6.789
  16. An efficient and simple refined theory for free vibration of functionally graded plates under various boundary conditions vol.16, pp.1, 2014, https://doi.org/10.12989/gae.2018.16.1.001
  17. Numerical approaches for vibration response of annular and circular composite plates vol.29, pp.6, 2018, https://doi.org/10.12989/scs.2018.29.6.759
  18. Vibration of angle-ply laminated composite circular and annular plates vol.34, pp.1, 2020, https://doi.org/10.12989/scs.2020.34.1.141
  19. Thermal buckling analysis of magneto-electro-elastic porous FG beam in thermal environment vol.8, pp.1, 2014, https://doi.org/10.12989/anr.2020.8.1.083
  20. Free vibration analysis of functionally graded beams with variable cross-section by the differential quadrature method based on the nonlocal theory vol.75, pp.6, 2020, https://doi.org/10.12989/sem.2020.75.6.737
  21. Vibration analysis of damaged core laminated curved panels with functionally graded sheets and finite length vol.38, pp.5, 2014, https://doi.org/10.12989/scs.2021.38.5.477