References
- K. T. Kim and Y. S. Kim, 2010, "Effects of process parameters on the wear behavior of thermally sprayed Ni-based hard coatings", Journal of the KSTLE, Vol. 26, No. 3, pp. 157-161.
- J. H. Lee, and Y. S. Kim, 2013, "Process optimization for Co-based self-flux alloy coating by Taguchi method", Journal of the KSPSE, Vol. 15, No. 6, pp. 109-115. https://doi.org/10.9726/kspse.2013.17.6.108
- T. Y. Kim, J. D. Kim and Y. S. Kim, 2013, "Effect of fusing treatment on anti-corrosion characteristics of Ni-based self-flux alloy coating", Journal of the KSPSE, Vol. 17, No. 4, pp. 79-85. https://doi.org/10.9726/kspse.2013.17.4.079
- J. R. Davis et al., 2004, "Handbook of Thermal Spray Technology", ASM International.
- H. I. Lee, M. S. Han, K. K. Baek, C. H. Lee, C. H. Shin and M. K. Chung, 2008, "Study on new candidate coating materials to challenge rudder cavitation damage", Corrosion Science and Technology, Vol. 7 No. 5, pp. 274-282.
- K. T. Kim and Y. S. Kim, 2010, "Process optimization of thermal-sprayed STS316 coatings", Journal of the KSOE, Vol. 24, No. 1, pp. 161-165.
- B. Bhushan, "Principles and Applications of Tribology", Wiley-Interscience.
- B. Xu, Z. Zhu, S. Ma, W. Zhang and W. Liu, 2004, "Sliding wear behavior of Fe-Al and Fe-Al/WC coatings prepared by high velocity arc spraying", Journal of Wear, No. 257, pp. 1089-1095.
- J. M. Chen, C. Guo and J. S. Zhou, 2012, "Microsturcture and tribological properties of laser cladding Fe-based coating on pure Ti substrate", Transactions of Nonferrous Metals Society of China, No. 22, pp. 2171-2178.
Cited by
- 실험계획법을 이용한 ALBC3에 대한 고속화염용사의 최적 공정 설계 vol.17, pp.4, 2014, https://doi.org/10.5762/kais.2016.17.4.448