References
- Kim, C. H., Kim, M. S., You, H. I., Choi, B. O., Lee, S. H., and Kim, D. S., "Roll-to-Roll Contact Printer with Multiple Printing Methods," J. Korean Soc. Precis. Eng., Vol. 27, No. 9, pp. 7-10, 2010.
- Kim, C. H., Jo, J., and Lee, S. H., "Design of Roll-to-Roll Printing Equipment with Multiple Printing Methods for Multi-Layer Printing," Review of Scientific Instruments, Vol. 83, No. 6, Paper No. 065001, 2012. https://doi.org/10.1063/1.4726018
- Kim, C. H., Lee, Y., Kim, Y. G., and Kim, D. S., "Effect of Printing Qualities on the Resonant Frequencies of Printed UHF RFID Tag Antennas," J. Korean Soc. Precis. Eng., Vol. 25, No.11, pp. 90-94, 2008.
- Lee, J. S., Nguyen, H. A. D., Kim, C. H., Shin, K. H., and Lee, D. J., "An Effect of Mechanical Factors on Printability of Micropattern in Roll-to-Roll Printing Process," Proc. of KSPE Autumn Conference, pp. 259-260, 2010.
- Nam, K. S., Yoon, S. M., Lee, S. H., Kim, D. S., and Kim, C. H., "Effect of Properties of Conductive Ink on Printability of Electrode Patterning by Gravure Printing Method," J. Korean Soc. Precis. Eng., Vol. 30, No. 6, pp. 573-577, 2013. https://doi.org/10.7736/KSPE.2013.30.6.573
- Jeon, S. W. and Kim, C. H., "Development of Software for Measurement of Geometric Characteristics of Printed Pattern in Printed Electronics," Proc. of KSPE Spring Conference, pp. 489, 2014.
- IEC "IEC62902 Ed 1.0, 119/30/RVN," http://www.iec.ch/dyn/www/f?p=103:52:0::::FSP_ORG_ID,FSP_DOC_ID,FSP_DOC_PIECE_ID:8679,152071,280240 (Accessed 15 OCT. 2014)
- Maini, R. and Aggarwal, H., "Study and Comparison of Various Image Edge Detection Techniques," International Journal of Image Processing(IJIP), Vol. 3, No. 1, pp. 1-11, 2009.
- Shrivakshan, G. T. and Chandrasekar, C., "A Comparison of various Edge Detection Techniques used in Image Processing," International Journal of Computer Science Issues(IJCSI), Vol. 9, No. 1, pp. 269-276, 2012.
- Gonzalez, R. C., Woods, R. E., and Eddins, S. L., "Digital Image Processing Using MATLAB," Prentice Hall, 2nd Ed., pp. 481-500, 2012.
Cited by
- Assessment of printability for printed electronics patterns by measuring geometric dimensions and defining assessment parameters vol.30, pp.12, 2016, https://doi.org/10.1007/s12206-016-1131-4
- Control and measurement of doctoring angle at deformed state in doctoring apparatus for printed electronics vol.18, pp.5, 2017, https://doi.org/10.1007/s12541-017-0076-6
- Development of doctoring apparatus capable of measurement and control of doctoring angle and force in printing equipment for printed electronics vol.29, pp.9, 2018, https://doi.org/10.1088/1361-6501/aad0fd