Earthquakes and Structures

  • 제7권4호
  • /
  • Pages.527-552
  • /
  • 2014
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and theoretical studies of confined HSCFST columns under uni-axial compression

  • Lai, M.H. (Department of Civil Engineering, The University of Hong Kong) ;
  • Ho, J.C.M. (Department of Civil Engineering, The University of Hong Kong)
  • 투고 : 2014.05.05
  • 심사 : 2014.06.06
  • 발행 : 2014.10.30
⟨ 이전 논문 다음 논문 ⟩

초록

The development of modern concrete technology makes it much easier to produce high-strength concrete (HSC) or ultra-high-strength concrete (UHSC) with high workability. However, the application of this concrete is limited in practical construction of traditional reinforced concrete (RC) structures due to low-ductility performance. To further push up the limit of the design concrete strength, concrete-filled-steel-tube (CFST) columns have been recommended considering its superior strength and ductility performance. However, the beneficial composite action cannot be fully developed at early elastic stage as steel dilates more than concrete and thereby reducing the elastic strength and stiffness of the CFST columns. To resolve this problem, external confinement in the form of steel rings is proposed in this study to restrict the lateral dilation of concrete and steel. In this paper, a total of 29 high-strength CFST (HSCFST) columns of various dimensions cast with concrete strength of 75 to 120 MPa concrete and installed with external steel rings were tested under uni-axial compression. From the results, it can be concluded that the proposed ring installation can further improve both strength and ductility of HSCFST columns by restricting the column dilation. Lastly, an analytical model calculating the uni-axial strength of ring-confined HSCFST columns is proposed and verified based on the Von-Mises and Mohr-Coulomb failure criteria for steel tube and in-filled concrete, respectively.

키워드

과제정보

연구 과제 주관 기관 : the Research Grants Council

참고문헌

  1. Cai, J. and He, Z.Q. (2006), "Axial load behavior of square cft stub column with binding bars", J. Construct. Steel Res., 62(5), 472-483. https://doi.org/10.1016/j.jcsr.2005.09.010
  2. Cai, S.H. (2003), Modern steel tube confined concrete structures, China Communications Press, Beijing, China (in Chinese).
  3. Fam, A., Qie, F.S. and Rizkalla, S. (2004), "Concrete-filled steel tubes subjected to axial compression and lateral cyclic loads", J. Struct. Eng., 130(4), 631-640. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:4(631)
  4. Giakoumelis, G. and Lam, D. (2004), "Axial capacity of circular concrete-filled tube columns", J. Construct. Steel Res., 60(7), 1049-1068. https://doi.org/10.1016/j.jcsr.2003.10.001
  5. Han, L.H. (2004), "Flexural behaviour of concrete-filled steel tubes", J. Construct. Steel Res., 60(2), 313-337. https://doi.org/10.1016/j.jcsr.2003.08.009
  6. Han, L.H. (2007), "Concrete filled steel structures: Theory and practice (second edition)", Science Press, Beijing, China (in Chinese).
  7. Han, L.H., He, S.H. and Liao, F.Y. (2011), "Performance and calculations of concrete filled steel tubes (cfst) under axial tension", J. Construct. Steel Res., 67(11), 1699-1709. https://doi.org/10.1016/j.jcsr.2011.04.005
  8. Han, L.H., Yao, G.H. and Zhao, X.L. (2005), "Tests and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (scc)" J. Construct. Steel Res., 61(9), 1241-1269. https://doi.org/10.1016/j.jcsr.2005.01.004
  9. Hawkins, N.M. (1968), "The bearing strength of concrete loaded through rigid plates", Mag. Concrete Res., 20(62), 31-40. https://doi.org/10.1680/macr.1968.20.62.31
  10. Ho, J.C.M. and Lai, M.H. (2013), "Behaviour of uni-axially loaded CFST columns confined by tie bars", J. Construct. Steel Res., 83, 37-50. https://doi.org/10.1016/j.jcsr.2012.12.014
  11. Ho, J.C.M., Lai, M.H. and Luo, L. (2014), "Uni-axial behaviour of confined high-strength CFST columns", Proceedings of the Institution of Civil Engineers. Structures and buildings, 166(SB1), 1-14.
  12. Ho, J.C.M. and Luo, L. (2012), "Uni-axial behaviour of normal-strength concrete-filled-steel-tube columns with external confinement", Earthq. Struct., 3(6), 889-910. https://doi.org/10.12989/eas.2012.3.6.889
  13. Ho, J.C.M. and Pam, H.J. (2003), "Inelastic design of low-axially loaded high-strength reinforced concrete columns", Eng. Struct., 25(8), 1083-1096. https://doi.org/10.1016/S0141-0296(03)00050-6
  14. Huang, C.S., Yeh, Y.K., Liu, G.Y., Hu, H.T., Tsai, K.C., Weng, Y.T., Wang, S.H. and Wu, M.H. (2002), "Axial load behavior of stiffened concrete-filled steel columns", J. Struct. Eng., 128(9), 1222-1230. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1222)
  15. Johansson, M. (2002), "The efficiency of passive confinement in cft columns", Steel Compos. Struct., 2(5), 379-396. https://doi.org/10.12989/scs.2002.2.5.379
  16. Kwan, A.K.H. (2000), "Use of condensed silica fume for making high-strength, self-consolidating concrete", Can. J. Civil Eng., 27(4), 620-627. https://doi.org/10.1139/l99-091
  17. Lai, M.H. and Ho, J.C.M. (2013), "Improving steel-concrete interface bonding in single-skinned high-strength concrete-filled-steel-tube columns by external steel rings", International Congress on Natural Sciences and Engineering (ICNSE 2013), Paper NSE309, 8-10 Jan, Taipei, Taiwan.
  18. Lai, M.H. and Ho, J.C.M. (2014a), "Behaviour of uni-axially loaded concrete-filled-steel-tube columns confined by external rings", The Structural Design of Tall and Special Buildings, 23(6), 403-426. https://doi.org/10.1002/tal.1046
  19. Lai, M.H. and Ho, J.C.M. (2014b), "Confinement effect of ring-confined concrete-filled-steel-tube columns under uni-axial load", Eng. Struct., 67, 123-141. https://doi.org/10.1016/j.engstruct.2014.02.013
  20. Li, B., Park, R. and Tanaka, H. (1991), "Effect of confinement on the behaviour of high strength concrete columns under seismic loading", Paper presented at the Pacific Conference on Earthquake Engineering, Auckland, 67-78.
  21. Liao, F.Y., Han, L.H. and He, S.H. (2011), "Behavior of cfst short column and beam with initial concrete imperfection: Experiments", J. Construct.Steel Res., 67(12), 1922-1935. https://doi.org/10.1016/j.jcsr.2011.06.009
  22. Mehrparvar, B. and Khoshnoudian, F. (2011), "Efficiency of active systems in controlling base-isolated buildings subjected to near-fault earthquakes", Struct. Des. Tall Spec.l Build., 20(8), 1019-1034. https://doi.org/10.1002/tal.572
  23. O'Shea, M.D. and Bridge, R.Q. (2000), "Design of circular thin-walled concrete filled steel tubes", J. Struct. Eng., 126(11), 1295-1303. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1295)
  24. Pam, H.J. and Ho, J.C.M. (2009), "Length of critical region for confinement steel in limited ductility high-strength reinforced concrete columns", Eng. Struct., 31(12), 2896-2908. https://doi.org/10.1016/j.engstruct.2009.07.015
  25. Pam, H.J., Kwan, A.K.H. and Islam, M.S. (2001), "Flexural strength and ductility of reinforced normal-and high-strength concrete beams", Proceedings of the Institution of Civil Engineers. Structures and buildings, 146(4), 381-389. https://doi.org/10.1680/stbu.2001.146.4.381
  26. Richart, F.E., Brandtzae g, A. and Brown, R.L. (1929), "The failure of plain and spirally reinforced concrete in compression", Illinois, USA: University of Illinois at Urbana Champaign.
  27. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng., ASCE, 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  28. Schneider, S.P. (1998), "Axially loaded concrete-filled steel tubes", J. Struct. Eng., 124(10), 1125-1138. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1125)
  29. Tan, K.F. (2006), "Analysis of formulae for calculating loading bearing capacity of steel tubular high strength concrete", J. Southwest Univ.Sci.Tech., 21(2), 7-10 (in Chinese).
  30. Xue, J.Q., Briseghella, B. and Chen, B.C. (2012), "Effects of debonding on circular cfst stub columns", J. Construct. Steel Res., 69(1), 64-76. https://doi.org/10.1016/j.jcsr.2011.08.002
  31. Zhong, S.T. (2006), "Unified theory of CFST: Research and application", Tsinghua University Press, Beijing, China (in Chinese).
  32. Zhou, K.J.H., Ho, J.C.M. and Su, R.K.L. (2010), "Normalished rotation capacity for deformability evaluation of high-performance concrete beams", Earthq. Struct., 1(3), 269-287. https://doi.org/10.12989/eas.2010.1.3.269

피인용 문헌

  1. An analysis-based model for axially loaded circular CFST columns vol.119, 2017, https://doi.org/10.1016/j.tws.2017.07.024
  2. A theoretical axial stress-strain model for circular concrete-filled-steel-tube columns vol.125, 2016, https://doi.org/10.1016/j.engstruct.2016.06.048
  3. Optimal design of external rings for confined CFST columns vol.67, pp.19, 2015, https://doi.org/10.1680/macr.14.00348
  4. Residual bond behavior of high strength concrete-filled square steel tube after elevated temperatures vol.27, pp.4, 2014, https://doi.org/10.12989/scs.2018.27.4.509
  5. Bearing Capacity of Stone-Lightweight Aggregate Concrete-Filled Steel Tubular Stub Column Subjected to Axial Compression vol.23, pp.7, 2014, https://doi.org/10.1007/s12205-019-2287-0
  6. Seismic behaviour of innovative composite walls with high-strength manufactured sand concrete vol.195, pp.None, 2014, https://doi.org/10.1016/j.engstruct.2019.05.096
  7. Compressive behavior of FRP-confined steel-reinforced high strength concrete columns vol.220, pp.None, 2014, https://doi.org/10.1016/j.engstruct.2020.110990
  8. Seismic performance and damage evaluation of spiral ribbed thin-walled concrete filled and encased steel tube composite columns vol.20, pp.6, 2014, https://doi.org/10.12989/eas.2021.20.6.669