참고문헌
- Agarwal, P. and Manuel, L. (2009), "Simulation of offshore wind turbine response for long-term extreme load prediction", Eng. Struct., 31(10), 2236-2246. https://doi.org/10.1016/j.engstruct.2009.04.002
- Ahsan, K. (2008), "Numerical simulation of wind effects: a probabilistic perspective", J. Wind Eng. Ind. Aerodyn., 96(10), 1472-1497 https://doi.org/10.1016/j.jweia.2008.02.048
- Burton, T., Sharpe, D. and Jenkins, N. (2011), Wind Energy Handbook, John Wiley&Sons, Chichester, England.
- Cheng, P.W. (2002), "A reliability based design methodology for extreme response of offshore wind turbine", Wind Energy Research Institute, Delft University of Technology, Netherlands
- Duquette, M.M. and Visser, K.D. (2003), "Numerical implications of solidity and blade number on rotor performance of horizontal-axis wind turbines", J. Solar Energy Eng., 125(4), 425-432. https://doi.org/10.1115/1.1629751
- Germanischer Lloyd (2005), "GL-2005 Rules and guidelines IV-industrial services, part 2-guideline for the certification of offshore wind turbines", Germanischer Lloyd, Hamburg.
- He, G.L. and Li, J. (2011), "Stochastic dynamic response of wind turbine systems under wind loads", J. Vib. Eng., 24(6), 696-703. (in Chinese)
- Holm-Jorgensen, K., Larsen, J.W. and Nielsen, S.R.K. (2008), "On the nonlinear structural analysis of wind turbine blades using reduced degree-of-freedom models", Struct. Eng. Mech., 28(1), 107-127. https://doi.org/10.12989/sem.2008.28.1.107
- Hsu, M.H. (2008), "Dynamic behaviour of wind turbine blades", Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 222(8), 1453-1464. https://doi.org/10.1243/09544062JMES759
- Holmes, J. (2002), "Effective static load distributions in wind engineering", J. Wind Eng. Ind. Aerodyn., 90(2), 91-109. https://doi.org/10.1016/S0167-6105(01)00164-7
- Katsumura, A., Tamura, Y. and Nakamura, O. (2007), "Universal wind load distribution simultaneously reproducing largest load effects in all subject members on large-span cantilevered roof", J. Wind Eng. Ind. Aerodyn., 95(9), 1145-1165. https://doi.org/10.1016/j.jweia.2007.01.020
- Karimirad, M. and Moan, T. (2011), "Wave-and wind-induced dynamic response of a spar-type offshore wind turbine", J. Waterw., Port, Coastal, Ocean Eng., 138(1), 9-20.
- Kasperski, M. and Niemann, H. (1992), "The LRC (load-response-correlation)-method a general method of estimating unfavourable wind load distributions for linear and non-linear structural behavior". J. Wind Eng. Ind. Aerodyn., 43(1), 1753-1763. https://doi.org/10.1016/0167-6105(92)90588-2
- Liao, M.F. (2008), Wind Turbine Technologies, The Northwest Industry University Press, Xi'an, China. (in Chinese)
- International Electrotechnical Commission (2006), Wind Turbine Generator Systems-1: Design Requirements, International Standard, Geneva, Switzerland.
- Murtagh, P.J., Basu, B. and Broderick, B.M. (2005), "Along-wind response of a wind turbine tower with blade coupling subjected to rotationally sampled wind loading", Eng. Struct., 27(8), 1209-1219. https://doi.org/10.1016/j.engstruct.2005.03.004
- Petrini, F., Li, H. and Bontempi, F. (2010), "Basis of design and numerical modeling of offshore wind turbines", Struct. Eng. Mech., 36(5), 599-618. https://doi.org/10.12989/sem.2010.36.5.599
- Shinozuka, M. and Seya, H. (1990), "Stochastic methods in wind engineering", J. Wind Eng. Ind. Aerodyn., 36(2), 1472-1497
- Ke, S.T., Ge, Y.J., Zhao, L. and Tamura, Y. (2012), "A new methodology for analysis of equivalent static wind loads on super-large cooling towers". J. Wind Eng. Ind. Aerodyn., 111(3), 30-39 https://doi.org/10.1016/j.jweia.2012.08.001
- Tarp, J., Madsen, P.H. and Frandsen, S. (2002), "Partial safety factors in the 3rd edition of IEC 61400 1: wind turbine generator systems-part 1: safety requirements", Technical Report R-1319, Riso National Laboratory, Roskilde
- Tempel, J.V.D. (2006), "Design of support structures for offshore wind turbines", Delft University of Technology, Netherlands.
- Veers, P.S., Ashwill, T.D., Sutherland, H.J. et al. (2003), "Trends in the design, manufacture and evaluation of wind turbine rotor", Wind Energy, 6(3), 245-259. https://doi.org/10.1002/we.90
- Wang, T.G. and Coton, F.N. (2000), "Prediction of the unsteady aerodynamic characteristics of horizontalaxis wind turbines including three-dimensional effects", Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 214(5), 385-400 https://doi.org/10.1243/0957650001537958
- Wang, T.G., Wang, L., Zhong, W. et al. (2012), "Large-scale wind turbine blade design and aerodynamic analysis", Chinese Sci. Bul., 57(5), 466-472. https://doi.org/10.1007/s11434-011-4856-6
피인용 문헌
- A new developed approach for EDL induced from a single concentrated force vol.21, pp.5, 2016, https://doi.org/10.12989/scs.2016.21.5.1105
- Equivalent static wind loads for stability design of large span roof structures vol.20, pp.1, 2015, https://doi.org/10.12989/was.2015.20.1.095
- Aerodynamic loads and aeroelastic responses of large wind turbine tower-blade coupled structure in yaw condition vol.56, pp.6, 2015, https://doi.org/10.12989/sem.2015.56.6.1021
- Statistical wind prediction and fatigue analysis for horizontal-axis wind turbine composite material blade under dynamic loads vol.9, pp.9, 2017, https://doi.org/10.1177/1687814017724088
- Aeroelastic Responses of Ultra Large Wind Turbine Tower-Blade Coupled Structures with SSI Effect vol.18, pp.12, 2015, https://doi.org/10.1260/1369-4332.18.12.2075
- Aerodynamic Force and Comprehensive Mechanical Performance of a Large Wind Turbine during a Typhoon Based on WRF/CFD Nesting vol.8, pp.10, 2018, https://doi.org/10.3390/app8101982
- Equivalent static wind loads analysis of tall television towers considering terrain factors of hilltops based on force measurement experiment vol.63, pp.4, 2014, https://doi.org/10.12989/sem.2017.63.4.509
- Wind load and wind-induced effect of the large wind turbine tower-blade system considering blade yaw and interference vol.28, pp.2, 2014, https://doi.org/10.12989/was.2019.28.2.071