Structural Engineering and Mechanics

  • 제52권3호
  • /
  • Pages.445-468
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A new PSRO algorithm for frequency constraint truss shape and size optimization

  • Kaveh, A. (Centre of Excellence for Fundamental Studies in Structural Engineering, School of Civil Engineering, Iran University of Science and Technology) ;
  • Zolghadr, A. (Centre of Excellence for Fundamental Studies in Structural Engineering, School of Civil Engineering, Iran University of Science and Technology)
  • 투고 : 2013.12.04
  • 심사 : 2014.04.04
  • 발행 : 2014.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper a new particle swarm ray optimization algorithm is proposed for truss shape and size optimization with natural frequency constraints. These problems are believed to represent nonlinear and non-convex search spaces with several local optima and therefore are suitable for examining the capabilities of new algorithms. The proposed algorithm can be viewed as a hybridization of Particle Swarm Optimization (PSO) and the recently proposed Ray Optimization (RO) algorithms. In fact the exploration capabilities of the PSO are tried to be promoted using some concepts of the RO. Five numerical examples are examined in order to inspect the viability of the proposed algorithm. The results are compared with those of the PSO and some other existing algorithms. It is shown that the proposed algorithm obtains lighter structures in comparison to other methods most of the time. As will be discussed, the algorithm's performance can be attributed to its appropriate exploration/exploitation balance.

키워드

과제정보

연구 과제 주관 기관 : Iran National Science Foundation

참고문헌

  1. Bellagamba, L. and Yang, T.Y. (1981), "Minimum-mass truss structures with constraints on fundamental natural frequency", AIAA J., 19(11), 1452-1458. https://doi.org/10.2514/3.7875
  2. Erol, O.K. and Eksin, I. (2006), "New optimization method: Big Bang-Big Crunch", Adv. Eng. Softw., 37, 106-111 https://doi.org/10.1016/j.advengsoft.2005.04.005
  3. Fourie, P.C. and Groenwold, A.A. (2002), "The particle swarm optimization algorithm in size and shape optimization", Struct. Multidiscip. Optim., 23(4), 259-267 https://doi.org/10.1007/s00158-002-0188-0
  4. Gomes, M.H. (2011), "Truss optimization with dynamic constraints using a particle swarm algorithm", Expert. Syst. Appl., 38, 957-968 https://doi.org/10.1016/j.eswa.2010.07.086
  5. Grandhi, R.V. (1993), "Structural optimization with frequency constraints-a review", AIAA J., 31(12), 2296-2303 https://doi.org/10.2514/3.11928
  6. Grandhi, R.V. and Venkayya, V.B. (1988), "Structural optimization with frequency constraints", AIAA J., 26, 858-66. https://doi.org/10.2514/3.9979
  7. Goldberg, D.E. (1989), Genetic algorithms in search, optimization and machine learning, Reading, Addison-Wesley, MA.
  8. Holland, J.H. (1992), Adaptation in natural and artificial systems: an introductory analysis with applications to biology, control, and artificial intelligence, 2nd Edition, MIT Press, Cambridge.
  9. Jansen, P.W. and Perez, R.E. (2011), "Constrained structural design optimization via a parallel augmented Lagrangian particle swarm optimization approach", Comput. Struct., 89(13-14), 1352-1356 https://doi.org/10.1016/j.compstruc.2011.03.011
  10. Kaveh, A. (2014), Advances in metaheuristic algorithms for optimal design of structures, Springer Verlag, GmbH, Wien-New York.
  11. Kaveh, A. and Khayatazad, A. (2012), "A novel meta-heuristic method: ray optimization", Comput. Struct., 112-113, 283-294 https://doi.org/10.1016/j.compstruc.2012.09.003
  12. Kaveh, A. and Laknejadi, A. (2011), "A novel hybrid charge system search and particle swarm optimization method for multi-objective optimization", Expert. Syst. Appl., 12(38), 15475-15488
  13. Kaveh, A. and Talatahari, S. (2009), "Particle swarm optimizer, ant colony strategy and harmony search scheme hybridized for optimization of truss structures", Comput. Struct., 87(56), 267-283 https://doi.org/10.1016/j.compstruc.2009.01.003
  14. Kaveh, A. and Talatahari, S. (2010a), "A novel heuristic optimization method: charged system search", Acta Mech., 213(3-4), 267-289 https://doi.org/10.1007/s00707-009-0270-4
  15. Kaveh, A. and Talatahari, S. (2010b), "Optimal design of skeletal structures via the charged system search algorithm", Struct. Multidiscip. Optim., 41(6), 893-911 https://doi.org/10.1007/s00158-009-0462-5
  16. Kaveh, A. and Talatahari, S. (2011), "Hybrid charged system search and particle swarm optimization for engineering design problems", Eng. Comput., 4(28), 423-440
  17. Kaveh, A. and Zolghadr, A. (2011), "A Shape and size optimization of truss structures with frequency constraints using enhanced charged system search algorithm", Asian J. Civil Eng., 12, 487-509
  18. Kaveh, A. and Zolghadr, A. (2012), "Truss optimization with natural frequency constraints using a hybridized CSS-BBBC algorithm with trap recognition capability", Comput. Struct., 102-103, 14-27 https://doi.org/10.1016/j.compstruc.2012.03.016
  19. Kennedy, J. and Everhart, R.C. (1995), "Particle swarm optimization", Proceedings of the IEEE international conference on neural networks, 4, 1942-1948 https://doi.org/10.1109/ICNN.1995.488968
  20. Konzelman, C.J. (1986), "Dual methods and approximation concepts for structural optimization", M.Sc. Thesis, Department of Mechanical Engineering, University of Toronto, Canada
  21. Lee, K.S. and Geem, Z.W. (2004), "A new structural optimization method based on the harmony search algorithm", Comput. Struct., 82, 781-798 https://doi.org/10.1016/j.compstruc.2004.01.002
  22. Lin, J.H., Chen, W.Y. and Yu, Y.S. (1982), "Structural optimization on geometrical configuration and element sizing with static and dynamic constraints", Comput. Struct., 15, 507-515 https://doi.org/10.1016/0045-7949(82)90002-5
  23. Lingyun, W., Mei, Z., Guangming, W. and Guang, M. (2005), "Truss optimization on shape and sizing with frequency constraints based on genetic algorithm", J. Comput. Mech., 25, 361-368
  24. Luh, G.C. and Lin, C.Y. (2011), "Optimal design of truss-structures using particle swarm optimization", Comput. Struct., 89(2324), 2221-2232 https://doi.org/10.1016/j.compstruc.2011.08.013
  25. Mohammadzadeh, S. and Nouri, M. (2013), "An improved algorithm in railway truss bridge optimization under stress, displacement and buckling constraints imposed on moving load", Struct. Eng. Mech., 46(4), 571-594 https://doi.org/10.12989/sem.2013.46.4.571
  26. Perez, R.E. and Behdinan, K. (2007), "Particle swarm approach for structural design optimization", Comput. Struct., 85(19-20), 1579-1588 https://doi.org/10.1016/j.compstruc.2006.10.013
  27. Rozvany, G.I.N., Bendsoe, M.P. and Kirsh, U. (1995), "Layout optimization of structures", Appl. Mech. Rev., 48(2), 41-119. https://doi.org/10.1115/1.3005097
  28. Sedaghati, R., Suleman, A. and Tabarrok, B. (2002), "Structural optimization with frequency constraints using finite element force method", AIAA J., 40, 382-388 https://doi.org/10.2514/2.1657
  29. Sergeyev, O. and Mroz, Z. (2000), "Sensitivity analysis and optimal design of 3D frame structures for stress and frequency constraints", Comput. Struct. 75(2), 167-185 https://doi.org/10.1016/S0045-7949(99)00088-7
  30. Soh, C.K. and Yang, J. (1996), "Fuzzy controlled genetic algorithm search for shape optimization", J. Comput. Civil Eng., ASCE 10(2), 143-150 https://doi.org/10.1061/(ASCE)0887-3801(1996)10:2(143)
  31. Talbi, E.G. (2009), Metaheuristics: from design to implementation, John Wiley and Sons
  32. Tang, H., Zhang, W., Xie, L. and Xue, S. (2013), "Multi-stage approach for structural damage identification using particle swarm optimization", Smart Struct. Syst., 11(1), 69-86 https://doi.org/10.12989/sss.2013.11.1.069
  33. Wang, D., Zha, W.H. and Jiang, J.S. (2004), "Truss optimization on shape and sizing with frequency constraints", AIAA J. 42, 1452-1456
  34. Wang, Y., Li, B., Weise, T., Wang, J., Yuan, B. and Tian, Q. (2011), "Self-adaptive learning based particle swarm optimization", Inform. Sci., 181(20), 4515-4538 https://doi.org/10.1016/j.ins.2010.07.013
  35. Xinchao, Z. (2010), "A perturbed particle swarm algorithm for numerical optimization", Appl. Soft. Comput., 10(1), 119-124 https://doi.org/10.1016/j.asoc.2009.06.010
  36. Zhao, Y., Zub, W. and Zeng, H. (2009), "A modified particle swarm optimization via particle visual modeling analysis", Comput. Math. Appl., 57, 2022-2029. https://doi.org/10.1016/j.camwa.2008.10.007

피인용 문헌

  1. Cohort intelligence algorithm for discrete and mixed variable engineering problems 2018, https://doi.org/10.1080/17445760.2017.1331439
  2. Shape optimization for partial double-layer spherical reticulated shells of pyramidal system vol.55, pp.3, 2015, https://doi.org/10.12989/sem.2015.55.3.555
  3. Comparison of nine meta-heuristic algorithms for optimal design of truss structures with frequency constraints vol.76, 2014, https://doi.org/10.1016/j.advengsoft.2014.05.012
  4. Cyclical parthenogenesis algorithm for layout optimization of truss structures with frequency constraints vol.49, pp.8, 2017, https://doi.org/10.1080/0305215X.2016.1245730
  5. Optimum design of steel floor system: effect of floor division number, deck thickness and castellated beams vol.59, pp.5, 2016, https://doi.org/10.12989/sem.2016.59.5.933
  6. Parametric modeling and shape optimization of four typical Schwedler spherical reticulated shells vol.56, pp.5, 2015, https://doi.org/10.12989/sem.2015.56.5.813
  7. A Backtracking Search Algorithm for the Simultaneous Size, Shape and Topology Optimization of Trusses vol.13, pp.15, 2016, https://doi.org/10.1590/1679-78253101
  8. An improved differential evolution based on roulette wheel selection for shape and size optimization of truss structures with frequency constraints vol.29, pp.1, 2018, https://doi.org/10.1007/s00521-016-2426-1
  9. Dolphin Echolocation Optimization: Continuous search space vol.1, pp.2, 2016, https://doi.org/10.12989/acd.2016.1.2.175
  10. Parametric modeling and shape optimization design of five extended cylindrical reticulated shells vol.21, pp.1, 2016, https://doi.org/10.12989/scs.2016.21.1.217
  11. Modified symbiotic organisms search for structural optimization pp.1435-5663, 2019, https://doi.org/10.1007/s00366-018-0662-y
  12. Meta-heuristic methods for optimization of truss structures with vibration frequency constraints vol.229, pp.10, 2018, https://doi.org/10.1007/s00707-018-2234-z
  13. Minimum-weight design of high-rise structures subjected to flexural vibration at a desired natural frequency vol.27, pp.15, 2018, https://doi.org/10.1002/tal.1515
  14. Structural failure classification for reinforced concrete buildings using trained neural network based multi-objective genetic algorithm vol.63, pp.4, 2014, https://doi.org/10.12989/sem.2017.63.4.429
  15. Optimization of the braced dome structures by using Jaya algorithm with frequency constraints vol.30, pp.1, 2014, https://doi.org/10.12989/scs.2019.30.1.047
  16. Combining Migration and Differential Evolution Strategies for Optimum Design of Truss Structures with Dynamic Constraints vol.43, pp.suppl1, 2014, https://doi.org/10.1007/s40996-018-0165-5
  17. Optimum design of shape and size of truss structures via a new approximation method vol.76, pp.6, 2014, https://doi.org/10.12989/sem.2020.76.6.799