DOI QR코드

DOI QR Code

원전 적용을 위한 면진장치의 성능기반 설계 변위 추정

Estimation of the Isolator Displacement for the Performance Based Design of Nuclear Power Plants

  • 투고 : 2014.06.05
  • 심사 : 2014.10.06
  • 발행 : 2014.11.01

초록

There has been an increasing demand for introducing a base isolation system to secure the seismic safety of a nuclear power plant. However, the design criteria and the safety assessment methodology of a base isolated nuclear facility are still being developed. A performance based design concept for the base isolation system needs to be added to the general seismic design procedures. For the base isolation system, the displacement responses of isolators excited by the extended design basis earthquake are important as well as the design displacement. The possible displacement response by the extended design basis earthquake should be limited less than the failure displacement of the isolator. The failure of isolators were investigated by an experimental test to define the ultimate strain level of rubber bearings. The uncertainty analysis, considering the variations of the mechanical properties of isolators and input ground motions, was performed to estimate the probabilistic distribution of the isolator displacement. The relationship of the displacement response by each ground motion level was compared in view of a period elongation and a reduction of damping. Finally, several examples of isolator parameters are calculated and the considerations for an acceptable isolation design is discussed.

키워드

참고문헌

  1. ASCE. Minimum Design Loads for Buildings and Other Structures. ASCE/SEI 7-10. Reston VA: American Society of Civil Engineers; 2010. 608 p.
  2. ASCE. Seismic Design Criteria for Structures, Systems, and Components in Nuclear Facilities. ASCE/SEI 43-05. Reston VA: American Society of Civil Engineers; 2005. 81 p.
  3. Kammerer AM, Whittaker AS, Constantinou MC. Technical considerations for seismic isolation of nuclear facilities. NUREG (Draft). Washington, DC: U.S. Nuclear Regulatory Commission; 2014.
  4. USNRC. A Performance-Based Approach to Define the Site-Specific Earthquake Ground Motion. Regulatory Guide. 1.208. Washington, DC: U.S Nuclear Regulatory Commission; 2007. 24 p.
  5. Japan Electric Association. Design and Technical Guideline of Seismic Isolation Structure for Nuclear Power Plant. JEAG 4614-2000. Nuclear Standard Committee of JEA; 2000. (in Japanese, only).
  6. ESC. Anti-seismic devices. BS EN 15129. European Standards Committee; 2010. 162 p.
  7. Forni M. Guidelines proposal for seismic isolation of nuclear power plant. ENEA Report RdS/2010/86. 2010. 22p.
  8. USNRC. Design Response Spectra for Seismic Design of Nuclear Power Plants. Regulatory Guide. 1.60. Washington, DC: U.S Nuclear Regulatory Commission; 1973. 6 p.
  9. Mizukosh K, Yasaka A, Iizuka, M. Failure Test of Laminated Rubber Bearings with Various Shapes. 10WCEE; 1992 Jul 19-24; Madrid, Spain. 2277-2280.
  10. Yabana S, Kanazawa K, Nagata S, Kitamura S, Sano T. Shaking table tests with large test specimens of seismically isolated FBR plants, 3; Ultimate behavior of upper structure and rubber bearings. Proceedings of 2009 ASME PVP; 2009 Jul 26-30; Prague, Czech. 179-187.
  11. Feng D, Miyama T, Masuda K, Liu W, Zhou F, Zheng B, Li Z. A detailed experimental study on chinese lead rubber bearing. 12WCEE, 2000 Jan 30-Feb 4 Auckland; New Zealand. Paper No. 202 p.
  12. Takaoka E, Takenaka Y, Nimura1 A. Shaking table test and analysis method on ultimate behavior of slender base-isolated structure supported by laminated rubber bearings. Earthquake Engineering and Structural Dynamics. 2011 Aug;40:551-570. https://doi.org/10.1002/eqe.1048
  13. Kikuchi M, Nakamura T, Aiken ID. Three-dimensional analysis for square seismic isolation bearings under large shear deformations and high axial loads. Earthquake Engineering and Structural Dynamics. 2010 Sep;39:1513-1531. https://doi.org/10.1002/eqe.1042
  14. Minowa C, Masaki N, Iiba M. Large scale dynamic failure tests of low damping rubber base isolators. 12WCEE, 2000 Jan 30-Feb 4 Auckland; New Zealand. 1344 p.
  15. Aiken ID, Kelly JM, Clark PW, Tamura K, Kikuchi M, Itoh T. Experimental studies of the mechanical characteristics of three types of SI bearings, 10WCEE; 1992 Jul 19-24; Madrid, Spain. 2281-2286.
  16. Lin YY, Chang KC. Effects of site classes on damping reduction factors. ASCE Journal of Structural Engineering. 2004 Nov;130(11):1667-1675. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1667)
  17. ATC. Seismic evaluation and retrofit of concrete buildings. Report ATC-40. Redwood City, CA: Applied Technology Council; c1996.
  18. Kim, JH, Kim MK, Choi I. Response of Base Isolation System Subjected to Spectrum Matched Input Ground Motions. EESK J. Earthquake Eng. 2013 Mar;17(2):89-95. https://doi.org/10.5000/EESK.2013.17.2.089
  19. Huang Y, Whittaker, AS, Kennedy RP, Mayes RL. Assessment of Base-Isolated Nuclear Structures for Design and Beyond-Design Basis Earthquake Shaking. Technical Report MCEER-09-0008. Buffalo NY: MCEER, 2009. 136 p.
  20. PEER. Pacific Earthquake Engineering Research Center NGA Database. Available from: http://peer.berkeley.edu/nga/.
  21. Kennedy RP. Performance-goal based (risk informed) approach for establishing the SSE site specific response spectrum for future nuclear power plants. Nuclear Engineering and Design. 2011 Mar; 241(3): 648-656. https://doi.org/10.1016/j.nucengdes.2010.08.001
  22. McGuire RK, Silva WJ, Costantino CJ. Technical basis for revision of regulatory guidance on design ground motions: Development of hazard- and risk-consistent seismic spectra for two sites. NUREG/CR-6769. Washington, DC: U.S. Nuclear Regulatory Commission, c2002.