DOI QR코드

DOI QR Code

Local dynamic buckling of FPSO steel catenary riser by coupled time-domain simulations

  • Eom, T.S. (Texas A&M University, College Station) ;
  • Kim, M.H. (Texas A&M University, College Station) ;
  • Bae, Y.H. (Texas A&M University, College Station) ;
  • Cifuentes, C. (Texas A&M University, College Station)
  • 투고 : 2014.08.18
  • 심사 : 2014.08.25
  • 발행 : 2014.09.25

초록

Steel catenary riser (SCR) is a popular/economical solution for the oil/gas production in deep and ultra-deep water. The behavioral characteristics of SCR have a high correlation with the motion of floating production facility at its survival and operational environments. When large motions of surface floaters occur, such as FPSO in 100-yr storm case, they can cause unacceptable negative tension on SCR near TDZ (touch down zone) and the corresponding elastic deflection can be large due to local dynamic buckling. The generation, propagation, and decay of the elastic wave are also affected by SCR and seabed soil interaction effects. The temporary local dynamic buckling vanishes with the recovery of tension on SCR with the upheaval motion of surface floater. Unlike larger-scale, an-order-of-magnitude longer period global buckling driven by heat and pressure variations in subsea pipelines, the sub-critical local dynamic buckling of SCR is motion-driven and short cycled, which, however, can lead to permanent structural damage when the resulting stress is greatly amplified beyond the elastic limit. The phenomenon is extensively investigated in this paper by using the vessel-mooring-riser coupled dynamic analysis program. It is found that the moment of large downward heave motion at the farthest-horizontal-offset position is the most dangerous for the local dynamic buckling.

키워드

참고문헌

  1. API Bulletin 2INT-MET (2007), Interim guidance on hurricane conditions in the Gulf of Mexico, American Petroleum Institute, 3-5, Washington, DC.
  2. API RP 2RD (2009), Design of risers for floating production systems (FPSs) and tension-leg platforms (TLPs), American Petroleum Institute, 83, Washington, DC.
  3. Aubeny, C. and Biscontin, G. (2008), "Interaction model for steelcompliant riser on soft seabed", Proceedings of the Offshore Technology Conference, Houston, TX.
  4. Aubeny, C. and Biscontin,G. (2009), "Seafloor-riser interaction model", Int. J. Geomechanics, 9, 133-141. https://doi.org/10.1061/(ASCE)1532-3641(2009)9:3(133)
  5. Bruton, D., White, D., Carr, M. and Cheuk, C. (2008), "Pipe-soil interaction during lateral buckling and pipeline walking -The SAFEBUCK JIP", Proceedings of the Offshore Technology Conference, Houston, TX.
  6. Bruton, D., White, D., Cheuk, C., Bolton, M. and Carr, M. (2006), "Pipe/Soil interaction behavior during lateral buckling, including large-amplitude cycle displacement tests by the Safebuck JIP", Proceedings of the Offshore Technology Conference, Houston, TX.
  7. Cheng, Y., Song, R., Mekha, B., Torstrick, A. and Liu, H. (2007), "Compression assessment of deepwater steel catenary risers at touch down zone", Proceedings of the Offshore Mechanics and Arctic Engineering, San Diego, CA.
  8. Jacob, BP, Reyes, MCT, Lima, BSLP, Torres, ALFL, Mourelle, MM, and Silva, RMC (1999). "Alternative configurations for steel catenary risers for turret moored FPSOs", Proceedings of the 9th Int.Offshore and Polar Eng. Conf., Brest, ISOPE
  9. Kang, H.Y. and Kim, M.H. (2012), "Hydrodynamic interactions and coupled dynamics between a container ship and multiple mobile harbors", Ocean Syst. Eng., 2 (3), 217-228 https://doi.org/10.12989/ose.2012.2.3.217
  10. Kim,M.H., Koo, B.J., Mercier, R.M. and Ward, E.G. (2005), "Vessel/mooring/riser coupled dynamic analysis of a turret-moored FPSO compared with OTRC experiment", Ocean Eng., 32, 1780-1802. https://doi.org/10.1016/j.oceaneng.2004.12.013
  11. Koo, B.J. and Kim, M.H. (2005), "Hydrodynamic interactions and relative motions of two floating platforms with mooring lines in side-by-side offloading operation", Appl. Ocean Res., 27 (6), 295-310.
  12. Kuiper, G.,Brugmans, J. and Metrikine, A. (2007), "Destabilization of deep-water risers by a heaving platform", J. Sound Vib., 310, 541-557.
  13. McCann, D., Smith, F. and O'Brien, P. (2003), "Guidelines for compression modeling in flexible risers for deepwater applications", Proceedings of the Offshore Technology Conference, Houston, TX.
  14. Song, R. and Stanton, P. (2009), "Advances in deepwater steel catenary riser technology state-of-the-art: part II -Analysis", Proceedings of the Offshore Mechanics and Arctic Engineering, Hawaii, USA
  15. Tahar, A. and Kim, M. (2003), "Hull/mooring/riser coupled dynamic analysis and sensitivity study of a tanker-based FPSO", Appl.Ocean Res., 25 (6), 367-382. https://doi.org/10.1016/j.apor.2003.02.001
  16. Wichers, J.E.W. and Devlin, P.V. (2001), "Effect of coupling of mooring lines and risers on the design values for a turret moored FPSO in deep water of Gulf of Mexico", Proceedings of the 11th International Offshore and Polar Engineering Conference, Stavanger, Norway.
  17. Yang, C.K. and Kim, M.H. (2011), "The structural safety assessment of a tie-down system on a tension leg platform during hurricane events", Ocean Syst. Eng., 1 (4), 263-283. https://doi.org/10.12989/ose.2011.1.4.263
  18. Yue, B., Campbell, M., Walters, D., Thompson, H. and Raghavan, K. (2010, Improved SCR design for dynamic vessel application, OMAE2010-20406.
  19. Zhou, J., Liu, Y. and Li, X. (2010), "Pipe walking-lateral buckling interaction", Proceedings of Earth and Space 2010: Engineering, Science, Construction, and Operations in Challenging Environment 2010 ASCE, Hawaii, USA.

피인용 문헌

  1. Turret location impact on global performance of a thruster-assisted turret-moored FPSO vol.6, pp.3, 2016, https://doi.org/10.12989/ose.2016.6.3.265
  2. A shell-dynamics model for marine pipelines of large suspended length vol.5, pp.4, 2015, https://doi.org/10.12989/ose.2015.5.4.301
  3. Numerical simulation of the coupled dynamic response of a submerged floating tunnel with mooring lines in regular waves vol.5, pp.2, 2015, https://doi.org/10.12989/ose.2015.5.2.109
  4. A finite element analysis for unbonded flexible risers under bending loads vol.5, pp.2, 2015, https://doi.org/10.12989/ose.2015.5.2.077
  5. Conceptual Design of a Riser for 10 MW OTEC vol.18, pp.1, 2015, https://doi.org/10.7846/JKOSMEE.2015.18.1.29
  6. Dynamic Effect of a Flexible Riser in a Fully Connected Semisubmersible Drilling Rig Using the Absolute Nodal Coordinate Formulation vol.139, pp.5, 2017, https://doi.org/10.1115/1.4037084
  7. BoD 기반의 Steel Lazy Wave Riser(SLWR)와 계류된 FPSO와의 연성해석에 관한 수치해석 연구 vol.43, pp.6, 2014, https://doi.org/10.5394/kinpr.2019.43.6.344
  8. Methodology for simulation of the post-failure behavior of flexible catenary risers vol.82, pp.None, 2014, https://doi.org/10.1016/j.marstruc.2021.103142