Journal of the Korean Society for Advanced Composite Structures (복합신소재구조학회 논문집)

Korean Society for Advanced Composite Structures (한국복합신소재구조학회)
권호 표지
DOI QR코드

DOI QR Code

A Study of Natural Frequency in Steel Wind Turbine Tower according to the RNA Model

강재 풍력 터빈 타워의 상부구조 모델링 방법에 따른 고유진동수 특성에 대한 고찰

  • Lee, Yun-Woo (Department of Civil, Environmental & Architectural Engineering, Korea University) ;
  • Choi, Jun-Ho (Department of Civil, Environmental & Architectural Engineering, Korea University) ;
  • Kang, Sung-Yong (Department of Civil, Environmental & Architectural Engineering, Korea University) ;
  • Kang, Young-Jong (Department of Civil, Environmental & Architectural Engineering, Korea University)
  • 이윤우 (고려대학교 건축사회환경공학과) ;
  • 최준호 (고려대학교 건축사회환경공학과) ;
  • 강성용 (고려대학교 건축사회환경공학과) ;
  • 강영종 (고려대학교 건축사회환경공학과)
  • Received : 2014.08.14
  • Accepted : 2014.09.12
  • Published : 2014.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Wind turbine tower has a very important role in wind turbine system as one of the renewable energy that has been attracting attention worldwide recently. Due to the growth of wind power market, advance and development of offshore wind system and getting huger capacity is inevitable. As a result, the vibration is generated at wind turbine tower by receiving constantly dynamic loads such as wind load and wave load. Among these dynamic loads, the mechanical load caused by the rotation of the blade is able to make relatively periodic load to the wind turbine tower. So natural frequency of the wind turbine tower should be designed to avoid the rotation frequency of the rotor according to the design criteria to avoid resonance. Currently research of the wind turbine tower, the precise research does not be carried out because of simplifying the structure of the other upper and lower. In this study, the effect of blade modeling differences are to be analyzed in natural frequency of wind turbine tower.

Keywords

References

  1. Choi, H. C., Kim, D. H., Kim, D. M., Park, K. K. (2010), "Seismic Response Analysis of a MW Class Wind-Turbine Considering Applied Wind Loads," Computational Structural Engineering Institute of Korea, Vol. 23, No. 2, pp. 209-215.
  2. GL Guideline (2010), "Guideline for the Certification of Wind Turbines"
  3. Han, T. H., Yoo, S. R., Won, D. H., Lee, S. H. (2013), "Resonance Safety Analysis of DSCT Wind Power Tower by Diameter Variation," Korean Recycled Construction Resource Institute Fall conference, pp. 202-205.
  4. Kim, S. Y., Kim, S. H. (2014), "Development of fault diagnostic system for mass unbalance and aerodynamic asymmetry of wind turbine system by using GH-Bladed" Journal of Korean Institute of Intelligent Systems, Vol. 24, No. 1, pp. 96-101. https://doi.org/10.5391/JKIIS.2014.24.1.096
  5. Lee, J. H., Bae, K. T., Jin, B. M., Kim, J. K. (2013), "Earthquake Response Analysis of an Offshore Wind Turbine Considering Effects of Geometric Nonlinearity of a Structure and Drag Force of Sea Water" Earthquake Engineering Society of Korea, Vol. 17, No. 6, pp. 257-269. https://doi.org/10.5000/EESK.2013.17.6.257
  6. Lee, J. H., Lee, S. B., Kim, J. K. (2012), "Earthquake Response Analysis of an Offshore Wind Turbine Considering Fluid-Structure-Soil Interaction" Earthquake Engineering Society of Korea, Vol. 16, No. 3, pp. 1-12. https://doi.org/10.5000/EESK.2012.16.3.001
  7. Moon, D. S., Kim, S. H. (2013), "Characteristic analysis on the mass unbalance and aerodynamic asymmetry of wind turbine system by using GH-Bladed" The Korean Society of Mechanical Engineers Spring conference, pp. 7-11.