DOI QR코드

DOI QR Code

Analytical model for the composite effect of coupled beams with discrete shear connectors

  • Zheng, Tianxin (Department of Civil Engineering, University of Nottingham Ningbo) ;
  • Lu, Yong (Institute for Infrastructure and Environment, School of Engineering, The University of Edinburgh) ;
  • Usmani, Asif (Institute for Infrastructure and Environment, School of Engineering, The University of Edinburgh)
  • 투고 : 2013.08.09
  • 심사 : 2014.07.05
  • 발행 : 2014.10.25

초록

Two-layer coupled or composite beams with discrete shear connectors of finite dimensions are commonly encountered in pre-fabricated construction. This paper presents the development of simplified closed-form solutions for such type of coupled beams for practical applications. A new coupled beam element is proposed to represent the unconnected segments in the beam. General solutions are then developed by an inductive method based on the results from the finite element analysis. A modification is subsequently considered to account for the effect of local deformations. For typical cases where the local deformation is primarily concerned about its distribution over the depth of the coupled beam, empirical modification factors are developed based on parametric calculations using finite element models. The developed analytical method for the coupled beams in question is simple, sufficiently accurate, and suitable for quick calculation in engineering practice.

키워드

참고문헌

  1. Al-deen, S., Ranzi, G. and Vrcelj, Z. (2011), "Full-scale long-term experiments of simply supported composite beams with solid slabs", J. Construct. Steel Res., 67(3), 308-321. https://doi.org/10.1016/j.jcsr.2010.11.001
  2. Berczynski, S. and Wroblewski, T. (2005), "Vibration of steel-concrete composite beams using the Timoshenko beam model", J. Vib. Control, 11, 829-848. https://doi.org/10.1177/1077546305054678
  3. Gianluca, R. (2008), "Locking problems in the partial interaction analysis of multi-layered composite beams", Eng. Struct., 30(10), 2900-2911. https://doi.org/10.1016/j.engstruct.2008.04.006
  4. Lawson, R.M. (2007), Building design using modules, Steel Construction Institute's Publication 348, Ascot, UK.
  5. Liang, Q.Q., Uy, B., Bradford, M.A. and Ronagh, H.R. (2004), "Ultimate strength of continuous composite beams in combined bending and shear", J. Construct. Steel Res., 60(8), 1109-1128. https://doi.org/10.1016/j.jcsr.2003.12.001
  6. Newmark, N.M., Siess C.P. and Viest I.M. (1951), "Tests and analysis of composite beams with incomplete interaction", Proc. Soc. Exp. Stress Anal., 9(1), 75-92.
  7. Nie, J. and Cai, C.S. (2003), "Steel-concrete composite beams considering shear slip effects", J. Struct. Eng., 129(4), 495-506. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(495)
  8. Nguyen, Q.H., Hjiaj, M. and Aribert, J.M. (2003), "A space-exact beam element for time-dependent analysis of composite members with discrete shear connection", J. Construct. Steel Res., 66(11), 1330-1338.4.
  9. Nguyen, Q.H., Hjiaj, M., Uy, B. and Guezouli, S. (2009), "Analysis of composite beams in the hogging moment regions using a mixed finite element formulation", J. Construct. Steel Res., 65(3), 737-748. https://doi.org/10.1016/j.jcsr.2008.07.026
  10. Nguyen, Q.H., Hjiaj, M. and Guezouli, S. (2011), "Exact finite element model for shear-deformable two-layer beams with discrete shear connection", Finite Elem. Anal. Des., 47(7), 718-727. https://doi.org/10.1016/j.finel.2011.02.003
  11. Razaqpur, A.G. and Nofal, M. (1989), "A finite element for modelling the nonlinear behavior of shear connectors in composite structures", Comput. Struct., 32(1), 169-174. https://doi.org/10.1016/0045-7949(89)90082-5
  12. Ranzi, G., Gara, F. and Ansourian, P. (2006), "General method of analysis for composite beams with longitudinal and transverse partial interaction", Comput. Struct., 84(31-32), 2373-2384. https://doi.org/10.1016/j.compstruc.2006.07.002
  13. Ranzi, G. and Zona, A. (2007), "A steel-concrete composite beam model with partial interaction including the shear deformability of the steel component", Eng. Struct., 29(11), 3026-3041. https://doi.org/10.1016/j.engstruct.2007.02.007
  14. Ranzi, G., Dall'Asta, A., Ragni, L. and Zona, A. (2010), "A geometric nonlinear model for composite beams with partial interaction", Eng. Struct., 32(5), 1384-1396. https://doi.org/10.1016/j.engstruct.2010.01.017
  15. Salari, M.R., Spacone, E., Shing, P.B. and Frangopol, D.M. (1998), "Nonlinear analysis of composite beams with deformable shear connectors", J. Struct. Eng., 124(10), 1148-1158. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1148)
  16. Wright, H.D. (1990), "The deformation of composite beams with discrete flexible connection", J. Construct. Steel Res., 15(1-2), 49-64. https://doi.org/10.1016/0143-974X(90)90042-F