Computers and Concrete

  • 제14권3호
  • /
  • Pages.233-245
  • /
  • 2014
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Fuzzy logic approach for estimating bond behavior of lightweight concrete

  • Arslan, Mehmet E. (Department of Civil Engineering, Duzce University) ;
  • Durmus, Ahmet (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2014.01.20
  • 심사 : 2014.06.29
  • 발행 : 2014.09.30
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a rule based Mamdani type fuzzy logic model for prediction of slippage at maximum tensile strength and slippage at rupture of structural lightweight concretes were discussed. In the model steel rebar diameters and development lengths were used as inputs. The FL model and experimental results, the coefficient of determination R2, the Root Mean Square Error were used as evaluation criteria for comparison. It was concluded that FL was practical method for predicting slippage at maximum tensile strength and slippage at rupture of structural lightweight concretes.

키워드

참고문헌

  1. Abraham, A. (2002), Rule Based Expert Systems, Handbook for Measurement Systems Design, Peter Sydenham and Richard Thorn (Eds.), John Wiley and Sons Ltd., London, UK.
  2. ACI 318-05 (2005), Building Code Requirements for Structural Concrete and Commentary, USA.
  3. Akkurt, I., Basyigit, C., Kilincarslan, S. and Beycioglu A. (2010), "Prediction of photon attenuation coefficients of heavy concrete by fuzzy logic", J. Frank. Inst., 347(9), 1589-1597 https://doi.org/10.1016/j.jfranklin.2010.06.002
  4. Arda, T.S. (1968), Compilation about Bond Behavior in Reinforced Concrete, I.T.U., Istanbul, Turkey.
  5. Arslan, M.E. (2007), "Investigation of bond strength of structural lightweight concrete and ordinary concrete comparatively in bending", MSc Thesis, Karadeniz Technical University, Trabzon.
  6. Arslan, M.E. and DURMUS, A. (2011), "Investigation of bond behavior between lightweight aggregate concrete and steel rebar using bending test", Comput. Concrete- Int. J., 8(4), 465-472. https://doi.org/10.12989/cac.2011.8.4.465
  7. Babu, K.G. and Babu, D.S. (1989), Behavior of lightweight expanded polystyrene concrete containing silica fume, Cement Concrete Res., 33(5), 755-762.
  8. Basyigit, C., Akkurt, I., Kilincarslan, S. and Beycioglu, A. (2010), "Prediction of compressive strength of heavyweight concrete by ANN and FL models", Neural Comput. Appl., 19(4), 507-513. https://doi.org/10.1007/s00521-009-0292-9
  9. Campione, G. and Mendola, L.L. (2004), "Behavior in compression of lightweight fiber reinforced concrete confined with transverse steel reinforcement", Cement Concrete Compos., 26(6), 645-656. https://doi.org/10.1016/S0958-9465(03)00047-7
  10. Chi, J.M., Huang R., Yang, C.C. and Chang, J.J. (2003), "Effect of aggregate properties on the strength and stiffness of lightweight concrete", Cement Concrete Compos., 25(2), 197-205. https://doi.org/10.1016/S0958-9465(02)00020-3
  11. Dahil, H.A. (2001), "Comparative Study of bond strength between steel rebars and high performance and ordinary concrete", MSc Thesis, Karadeniz Technical University, Trabzon.
  12. Ersoy, U. and O zcebe, G. (2001), Reinforced Concrete: Basic Principles and Designing According to TS- 500-2000 and Turkey's Earthquake Resistant Design Code (1998), Evrim Publishing, Istanbul, Turkey.
  13. Ferguson, P.M. (1965), Reinforced Concrete Fundamentals, Second Edition, John Wiley and Sons, New York, USA.
  14. Husem, M. and Durmus, A. (1993), Lightweight Aggregate Concretes Produced with Aggregates of Blacksea Region, Advances in Civil Engineering, First Technical Congress, Book of Proclamation, Gazi Magusa- KKTC, October.
  15. Husem, M. and Durmus, A. (1995), "Investigation of bond strength of lightweight aggregate concrete and ordinary concrete comparatively", Turkey Civil Engineering XIII. Technical Congress, Istanbul, November.
  16. Husem, M. (1995), "Investigation of Lightweight Aggregate Concrete Produced with Aggregate of Blacksea Region and Ordinary Concrete Comparatively", Ph.D. Thesis, Karadeniz Technical University, Trabzon.
  17. Ichinose, T., Kanayama, Y., Inoue, Y. and Bolander, J.E. (2004), "Size effect on bond strength of deformed bars", Construct. Build. Mater., 18(7), 549-558. https://doi.org/10.1016/j.conbuildmat.2004.03.014
  18. Kayali, O., Haque M.N. and Zhu B. (2003), "Some characteristics of high strength fiber reinforced lightweight aggregate concrete", Cement Concrete Compos., 25(2), 207-213. https://doi.org/10.1016/S0958-9465(02)00016-1
  19. Kilic, A., Atis, C.D., Yasar, E. and O zcan F. (2003), "High-strength lightweight concrete made with scoria aggregate containing mineral admixtures", Cement Concrete Res., 33(10), 1595-1599. https://doi.org/10.1016/S0008-8846(03)00131-5
  20. Koksal, F., Sahin, Y., Beycioglu, A., Gencel, O. and Brostow, W. (2012), "Estimation of fracture energy of high strength steel fiber reinforced concrete using rule based mamdani type fuzzy inference system", Sci. Eng. Compos. Mater., 19(4), 373-380.
  21. Mounir M.K., Mohamed A.S. and Mohamed A.A. (2013), "Steel-concrete bond potentials in selfcompacting Concrete mixes incorporating dolomite powder", Adv. Concrete Construct., An Int. J., 1(4).
  22. Omid, M. (2011) "Design of an expert system for sorting pistachio nuts through decision tree and fuzzy logic classifier", Expert Syst. Appl., 38(4), 4339-4347 https://doi.org/10.1016/j.eswa.2010.09.103
  23. Subasi, S., Beycioglu A., Sancak, E. and Sahin, l. (2012), "Rule-based mamdani type fuzzy logic model for the prediction of compressive strength of silica fume included concrete using non-destructive test rresults", Neural Comput. Appl., DOI: 10.1007/s00521-012-0879-4.
  24. Topcu, I.B. and Saridemir, M. (2008a), "Prediction of compressive strength of concrete containing fly ash using artificial neural network and fuzzy logic", Comput .Mater. Sci., 41(3), 305-311. https://doi.org/10.1016/j.commatsci.2007.04.009
  25. Topcu, I.B. and Saridemir, M. (2008b), "Prediction of rubberized concrete properties using artificial neural networks and fuzzy logic", Construct. Build Mater., 22(4), 532-540. https://doi.org/10.1016/j.conbuildmat.2006.11.007
  26. Yeih, W., Chang, J.J. and Tsai, C.L. (2004), "Enhancement of the bond strength of epoxy coated steel by the addition of fly ash", Cement Concrete Compos., 26(4), 315-321. https://doi.org/10.1016/S0958-9465(02)00142-7
  27. Zadeh, L.A. (1965), "Fuzzy Sets", Inform. Control, 8, 338-352. https://doi.org/10.1016/S0019-9958(65)90241-X

피인용 문헌

  1. Investigation of bond-slip modeling methods used in FE analysis of RC members vol.56, pp.2, 2015, https://doi.org/10.12989/sem.2015.56.2.275
  2. Implementation of bond-slip effects on behaviour of slabs in structures vol.16, pp.2, 2015, https://doi.org/10.12989/cac.2015.16.2.311
  3. Neuro-fuzzy and artificial neural networks modeling of uniform temperature effects of symmetric parabolic haunched beams vol.56, pp.5, 2015, https://doi.org/10.12989/sem.2015.56.5.787
  4. Mechanical properties of blended cements at elevated temperatures predicted using a fuzzy logic model vol.20, pp.2, 2017, https://doi.org/10.12989/cac.2017.20.2.247
  5. Bending strength diagnosis for corroded reinforced concrete beams with attendance of deterministic, random and fuzzy parameters vol.5, pp.3, 2020, https://doi.org/10.1080/24705314.2020.1765268
  6. Bond behavior investigation of ordinary concrete-rebar with hinged beam test and eccentric pull-out test vol.26, pp.6, 2014, https://doi.org/10.12989/cac.2020.26.6.587