1. INTRODUCTION
Recently, companies have been faced with fierce competition and organizations are forced to adapt quickly or cease to exist in this sort of business environment. In order to meet the demands of rapid change, most companies build flexible and temporary groups such as project teams or virtual teams. Project teams and virtual teams have the same fundamental purpose, whether collocated or dispersed. They use the power of collective intelligence to troubleshoot and solve a problem. Project member’s participation and retention depends on member attachment, which is cultivated by connecting members with topics of interest to them and like-minded others. According to Matzat [29], successful interaction in online communities depends on both high usability and efforts that support the members' social interaction as a group. To promote effective group interaction, reinforcing team spirits and group interactions is necessary. In this study, consideration was given to the role of group dynamics as a tool to facilitate productive interaction in a virtual environment. Group dynamics are a kind of mechanism for group interaction. They accommodate different viewpoints and keep project members focused on specific tasks. Group dynamics are not well researched, but they are important for collaboration and creativity leading to joint knowledge creation and troubleshooting. This study assumed that group dynamics promoted effective interaction in groups and attempted to reveal the components of group dynamics. The study also examined how group dynamics affected team achievements in a virtual environment.
2. LITERATURE REVIEW
2.1 Team Model and Group Interaction
To create value and combine the creativity of their employees, many organizations rely on the team model [22]. The reason why they depend on the team model is that groups are superior to the individual in many tasks. Although group work is sometimes difficult to manage, the team model contributes to an issue-oriented program or complex issue.
Group interaction is the core of the team model. Group interaction coordinates team members, tasks, and tools [21]. According to the Time, Interaction, and Performance (TIP) theory, group interaction is crucial for the effective coordination of resources among functions and activities in work groups simultaneously performing different functions [30]. In order to facilitate group interaction, a step-by-step approach is needed. Group interaction includes activities such as the construction of a team, setup of goals, exchange of ideas, construction of agreements, and yield of results.
According to Tuckman [37], the development of a group normally goes through the following stages: forming, storming, norming, and performing. In the forming stage, the group members get together and they indulge themselves with orientation accomplished. This stage allows group members to identify the boundaries of both interpersonal and task behaviors. The second stage is storming. In this stage, disagreements appear and conflicts happen around interpersonal issues. These behaviors serve as resistance to group influence and task requirements. However, resistance is finally overcome in the norming stage. Cohesiveness developed by members and personal opinions are expressed in the task realm during this stage. The last stage is performing. In this step, group energy is channeled into the tasks. Structural issues have been resolved finally, and the structure can become supportive of task performance. Fisher [23] created a developmental model similar to Tuckman’s model. He studied the developmental nature of group discussion and suggested four steps of the developmental model: orientation, conflict, emergence, and reinforcement. Many researchers make rules or strategies for enhancing interactions based on the two studies mentioned above.
Group interaction may be accommodated using computer mediation for an idea-generation task [38]. The distributed asynchronous form of group interaction has obvious benefits. Group members do not have to be physically in the same place to meet, nor must they communicate with one another at the same time. DeRosa et al. [18] examined the influence of electronic communication media on group idea generation tasks and revealed that electronic brainstorming groups are more productive and more satisfied with the interaction process than face-to-face groups.
2.2 Group Dynamics
Team members exchange their ideas in order to come up with creative solutions for problems and to generate ideas for future innovations. In such a group process, group dynamics provide an important basis for creative ideas and innovations [32]. Group dynamics are the influential actions, processes, and changes that occur within and between groups [4]. They are psychological processes and the actions of a group engaged in a common endeavor, and they have been recognized as a central branch of social and organizational psychology [17]. Group dynamics are a driving force in promoting the exchange of knowledge and facilitating interactions in project groups. They are expressed in the form of cooperation or creativity. In many fields of research, there is an interest in understanding how group dynamics influence individual behaviors, attitudes, and opinions. Among the group members, there is a state of interdependence through which behaviors, attitudes, opinions, and experiences of one member are collectively influenced by the other group member.
Project members influence each other through group interactions. Group interactions can develop a number of dynamic processes. In order to ensure positive group dynamics, positive stimulus and solidarity between team members are needed. Buchele and Spitz [1] suggested factors of group dynamics in a small group as follows: individual personalities in interaction, group boundaries, leadership, cohesiveness, role differentiation, patterns of communication, emotional relations, norms, climate, values, stages of group development, and subgroups. These processes include norms, roles, relations, development, need to belong, social influence, and effects on behavior. Taggar [35] highlighted the importance of team creativity-relevant processes such as inspirational motivation and coordination. Waruszynski [14] suggested that group dynamics are primarily rooted in social psychology that focuses on understanding the cohesiveness of groups, leadership, and group decision processes. Based on integrating previous research, Hoegl and Parboteeah [24] argued that high teamwork quality is related to mutual support in team discussion and individual task work, maintenance of work norms, open communication, fostering group cohesion, and ensuring team members’ contributions. Tekleab et al. [36] insisted that team conflict and cohesion strongly influence the ability of team members to interact effectively. Team projects should not always require only a positive process. As shown in Tuckman’s and Fisher’s study, organizational conflict is important for the purpose of organizational performance.
We have analyzed variables affecting group dynamics using project notes recorded by students. Our finding revealed that the project performance became high when the interaction happened more frequently. In addition, we have found that strong leadership, fierce debates among team members, and strong cohesion promoted productive interaction. Based on previous studies and prior analysis, we suggest the components of group dynamics, as shown in Table 1.
Table 1.The Components of Group Dynamics
2.2.1 Leadership
The first component of group dynamics is leadership. Leadership is the process of social influence in which one person can enlist the support of others in the accomplishment of a common task [2]. Leadership can be divided into two types: task-oriented and relationship-oriented leadership [40]. Task-oriented leadership is a style in which leaders focus on goal achievements and establish well-defined patterns of communication. In contrast, relationship-oriented leadership is a style in which leaders show concern and respect for their followers, look out for their welfare, and express appreciation and support. Since a project team is temporary and has a clear goal, strong leadership is absolutely necessary to facilitate group interaction and solve problems. Task-oriented leadership has a role in promoting collaboration and compliance with rules, and relationship-oriented leadership plays a role in motivating members through encouragement, persuasion, and inspiration. These two types of leadership attract members’ attention and yield influence over members.
2.2.2 Creative Friction
The second component of group dynamics is creative friction. Project members from diverse specialties bring multiple perspectives and experiences to the project, and thus conflict is sure to occur. Task conflict refers to the disagreements among the group members about the content of the task due to different viewpoints, opinions, and ideas. Relationship conflict refers to interpersonal incompatibilities and frictions among the group members resulting in tension, annoyance, and animosity [26]. Because task conflict increases the quality of decisions, the acceptance of decisions and satisfaction with the group outcome, task conflict is expected to be beneficial for group performance [26].
Creative friction is a dynamic tension between members and team creativity-relevant processes. Creative friction is caused by a task conflict related to the job, and occurs from diverse perspectives [11]. Diverse perspectives, which facilitate idea generation in the eyes of the creative individual, occasionally give rise to conflict [3]. Divergent thinking, one of the defining abilities and personality traits of creative people, comes with diverse perspectives. Guilford [6] proposed four basic categories of divergent thinking: fluency, flexibility, originality, and elaboration. Such an intrinsic state of tension in groups stimulates movement toward the achievement of desired common goals [10]. Additionally, creative friction safeguards against groupthink. Groupthink is a quick and simple decision making method that people use when working in a very cohesive subgroup [9]. It occurs when members strive for agreement. Groupthink hinders group members’ evaluation of different or divergent views, and thus causes errors in group decision making. Creative friction stimulates environments for project performance by facilitating idea generation, encouraging rational decision making, and preventing groupthink.
2.2.3 Group Cohesion
The last component of group dynamics is group cohesion. Cohesion is defined as a group property with individual manifestations of feelings of belongingness or attraction to the group [12]. Because members who belong to highly cohesive teams may, under certain circumstances, suspend their ability to think individually and express critical ideas, high levels of team cohesion may compromise the quality of team decision making and problem solving [8]. Group cohesion is the strength of the bonds linking individuals to the group and the degree to which the group members coordinate their efforts to achieve goals [4]. Members who feel team cohesion may believe that they can speak openly about mistakes without fear of negative repercussions [20]. Mullen and Cooper [31] defined a cohesive group with the following characteristics: interpersonal attraction, task commitment, and group pride. Then, they showed that group cohesion affects performance. Group dynamics resulted in strong cohesion based on intermember acceptance [19]. Therefore, group cohesion can be viewed as the final component of group dynamics. The relationship among components affecting group dynamics can be represented as described in Fig. 1.
Fig. 1Mechanisms of Group Dynamics
3. HYPOTHESES DEVELOPMENT
The aim of this study was to reveal how group dynamics affect an ICT-mediated team project. Based on previous studies, we suggested that the components of group dynamics were leadership, creative friction, and group cohesion. Then, we set our hypotheses to examine the impact of group dynamics on team achievements through empirical research on ICT-based team projects. The research model is shown in Fig. 2.
Fig. 2Research Model
3.1 The Relationship between Team Achievements and Satisfaction
Every project team has objectives and endeavors to achieve the intended outcomes. Project outcomes can be divided into physical and psychological outcomes. Physical outcomes are estimated by delivery schedules, budget, and quality of objectives. They are clearly measured and related in some way to the desired outcomes. In an idea generation task, physical outcomes can be measured by quantity and quality of the newly formed ideas. On the other hand, psychological outcomes are related to members’ sentiments. Hyatt and Ruddy [25] have noted that members’ satisfaction with the team is a critical aspect of group effectiveness. Felps and colleagues [22] insisted that group work can cause poor performance such as low viability and an unhappy team. Members may feel a high level of satisfaction if they achieved a great deal or made progress on the task. Based on this argument, we hypothesized the following:
3.2 Role of Group Cohesion on Team Achievements
An atmosphere of online communities influences people's intent to participate in online communities and affects the outputs of online communities. Many researchers [29], [31], [39] have already showed that cohesive teams are likely to believe that they perform better. Indeed, if team members escape from the feeling of isolation and antagonism, they can express their opinions actively. If team members become cohesive, they put forth effort to achieve a common goal. Once team members take their fear away and become cohesive, they efficiently collaborate with each other on the team project [31]. Accordingly, the following hypothesis was tested in the study.
3.3 Role of Creative Friction in Group Cohesion and Team Achievements
Creative thinking is becoming increasingly important in groups [32]. It refers to the ability to take new perspectives on problems and apply persistence to the exploration of new pathways to solve problems [35]. To generate creative thinking, creative friction should be encouraged. Creative friction allows team members to listen to each other, be willing to understand and appreciate conflicting viewpoints, and positively question each other’s assumptions [5].
As previously mentioned above, a project team undertakes some steps of team formation. According to Tuckman [37], cohesiveness is formed after disagreements and conflicts around tasks and personal relationships. Once cohesiveness is formed, the structure becomes supportive of task performance. Therefore, it can be assumed that creative friction is positively related with group cohesion.
Interactions involving conflicting viewpoints promote more discussion and critical thinking [27]. Task conflict increases the quality of decisions, acceptance of decisions, and satisfaction with the group outcome, so that task conflict is regarded as beneficial for group performance [26]. A number of studies on organizational learning and innovation have stressed the positive role of creative friction in facilitating innovation and learning [15]. Innovative companies try to harness the power of divergent viewpoints despite the creative friction between employees that usually occurs [7]. Creative friction facilitates the generation of a wide variety of ideas and responses to a particular problem, so it has a role in improving team achievements. This study proposed hypothesis 3 and 4 as follows.
3.4 Role of Leadership on Creative Friction, Group Cohesion, and Team Achievements
In virtual teams, leaders are often the nexus of the team. With proven ability, they take responsibility for task completion and implement team processes. Team project leaders affect group cohesion, norms, and team values. They play a key role in guiding the team members, negotiating conflicts, and motivating them to stay focused, and these activities engage team members in the project process. As stated above, task-oriented and relationship-oriented leadership are both needed for a successful project. Task-oriented leadership influences goal achievements and relationship-oriented leadership creates a positive atmosphere [16]. A team needs a great amount of freedom to create new ideas. However, discipline also needs to work within the confines of reality and stay in alignment with the organization’s strategies. Team project leaders can control the team through project discipline or ground rules, and task-oriented leadership can ensure that deadlines are met. Therefore, leaders should create strong discipline and share it with team members [14]. The ability of leaders is essential to shape group cohesion. A leader can build group cohesion by encouragement or inspiration of the members. Under the management of a team leader, creative friction and cohesion are generated. These byproducts and leadership may contribute to achieving the goal. Extending these arguments, we hypothesized the following:
4. METHOD
4.1 Research Design
We conducted an empirical study to verify the aforementioned hypotheses utilizing a class at Hanyang University in Korea. The class contained e-learning content designed to foster students’ creative thinking and problem solving skills. One hundred students in various majors were enrolled in the class per semester.
The content provided students with the opportunity to improve their skills in facilitating group decision making processes and assisting groups in achieving productive outcomes. The team project topic was about creative idea generation. The instructor organized small groups of approximately 8 to 10 members so that students were mixed heterogeneously, considering sex, grade, major, and team project experience. A team leader was elected by the consensus of the team and he or she took on the overall coordination of the team. The instructor provided guidelines for the successful implementation of the team project, and the team leader had powerful authority with a penalty system. Evaluation criteria were about the product (such as originality, creativity, and feasibility of outputs) and process (such as the compliance of team rules, frequency of interaction, and degree of participation). A facilitator addressed the important of interaction in teams.
4.2 Measures of the Constructs and Data Collection
We have reviewed literature [20], [26], [40] and constructed measurements. The questionnaires were refined through the pilot test. Questionnaires were measured on a five-point Likert scale (1=very strongly disagree, 5=very strongly agree). Items used to measure constructs are shown in Table 2.
Table 2.Items Used to Measure Constructs
A survey was carried out among the undergraduate students enrolled in the e-learning course. The intention was for students to work in teams on project themes developed in collaboration with other majors. Students were split into teams of six or seven and carried out the team project in forums or chat rooms. The study was conducted three times for different participants. Each study took approximately two weeks and it was carried out in November 2012, May 2013, and November 2013. Students absorbed the project-related knowledge through e-learning courses every 1 hour per week and accomplished the project during two month using different types of online communities such as SNS. After students experienced the project, the survey was carried out. One hundred and ninety four responses among three hundred students were obtained, yielding a response rate of 64.6%. As shown in Table 3, the ratio of males to females was 50.5% to 49.5%. The percentages of freshmen, sophomores, juniors, and seniors were 23.7%, 23.2%, 22.7%, and 30.4%, respectively. Of these respondents, 76.8% had already experienced a team project and 78.9% had taken e-learning courses. While 85.6% of respondents used online communities such as café and club, only 7.2% used an SNS for the team project. The ratio of respondents who experienced team project, e-learning and online community shows that demographics of respondents are appropriate for the analysis of the research model.
Table 3.Demographics of Respondents
4.3 Reliability and Validity Test
Statistical data analysis was performed using SPSS 17.0 for factor analysis and reliability analysis. Cronbach's alpha can be considered an adequate index of the inter-item consistency reliability. As shown in Table 4, Cronbach’s alpha was found to be greater than 0.70 and it satisfied Nunnally’s standard [13]. For convergent validity testing, we used factor analysis. The principal component was analyzed with a varimax rotation to extract multivariate measures of flexibility and its infrastructural supports. As shown in Table 4, factor analysis yielded 5 components with eigen values above 1. As a result of the analysis, we saw an increase from 0.717 to 0.885 and all questions had good loadings on our intended constructs.
Table 4.Goodness of Fit Indicators for the Measurement Model
Results explained 78.24% of variable dispersion. Next, we conducted confirmatory factor analysis (CFA) to further establish the reliability and discriminant validity of the multiitem scales (see Table 5). The construct validity of the research instrument was assessed via CFA using AMOS 4.0. To perform CFA, we carried out the following activities. First, the measurement model should demonstrate goodness of fit for the empirical data and meet the requirements of certain indexes. The preliminary results showed that we did not obtain satisfactory results in several indices (e.g., CMIN/DF, CFI). CMIN/DF should be less than 2 and the goodness of fit index (GFI) should be larger than 0.9. Thus, we performed CFA analysis again after removing two items (creative friction 4, team achievements 4). The squared multiple correlation (SMC) of the two items was less than 0.04, and the standardized regression value of the two items was less than 0.5. As a result, all fit indices (CMIN/DF = 1.37, GFI = 0.91, AGFI = 0.88, NFI = 0.95, CFI = 0.98, RMSEA = 0.043) were calculated and found to be within acceptable ranges, thus supporting the overall fit of the measurement model (see Table 4). Table 4 shows that the proposed research model has a concrete empirical evidence.
Table 5.Convergent Validity and AVE
Second, we carried out the convergent validity test. Convergent validity should fulfill the following criteria simultaneously: (1) factor loading for an item should exceed 0.7, (2) construct reliability should be greater than 0.7, and (3) average variance extracted (AVE) for a construct should exceed the reference value of 0.5. As shown in Table 5, all factor loadings of the reflective indicators exceeded 0.7 while construct reliabilities ranged from 0.87 to 0.92 and the AVE ranged from 0.67 to 0.76 (see Table 5). Table 5 shows that items in the questionnaire can measure variables appeared in the research model.
We compared the square root of the AVE with the correlations between the constructs. Each construct demonstrated satisfactory discriminant validity when the square root of its AVE value exceeded its correlation with other constructs [26]. As shown in Table 6, each square root of the AVE was greater than the correlations between constructs. Therefore, we could confirm the discriminant validity of the scales (see Table 6). Table 6 shows that each variable in the research model implies different meaning from each other.
Table 6.Note: Principal diagonal elements correspond to the square root of the average variance extracted (AVE) of each construct; the other figures correspond to the correlations between the constructs.
5. HYPOTHESIS TESTING
After the above treatment, the path relationships within the research model were analyzed by structural equation modeling (SEM) using AMOS 4.0. The result of the SEM is shown in Fig. 2 and Table 7. The goodness-of-fit statistics indicated a good fitting for our model. The χ2/df ratio was 1.538, which was indicative of good fit between the observed and reproduced covariance matrices. The fit indices of the research model were acceptable (GFI=0.904, RMR=0.039, NFI=0.931, TLI=0.975, CFI=0.970, RMSEA=0.053).
Table 7.Note: Significance levels are denoted as **p<0.01, *p<0.05 χ²/df=1.538, GFI=0.904, RMR=0.039, NFI=0.931, TLI=0.975, CFI=0.970, RMSEA=0.053
In this study, consideration was given to the role of group dynamics. We revealed that team achievements were positively related to satisfaction (B=0.544, t=8.469) and group cohesion affected team achievements (B=0.122, t=2.272). Therefore, hypothesis 1 and hypothesis 2 were supported. The results showed that the impacts of creative friction on group cohesion (B=0.392, t=6.383) and team achievements (B=0.265, t=3.610) were also significant, and thus hypothesis 3 and hypothesis 4 were also supported. It was also revealed that the impact of leadership on team creative friction (B=0.283, t=4.889), group cohesion (B=0.368, t=4.969), and team achievements (B=0.348, t=6.876) were statistically significant. As a result, our findings showed that leadership, creative friction, and group cohesion had positive relationships with team achievements, and these components of group dynamics had close relations with each other.
6. DISCUSSION AND IMPLICATIONS
6.1 Findings and Implications
The usage of ICT that supports group work has increased exponentially. For that reason, group work using a information system has become an important research topic [28,34]. This research suggested group dynamics as a mechanism for successful team projects and attempted to verify the impact of group dynamics through empirical studies. Focusing on the team level of analysis, we elicited leadership, creative friction, and group cohesion as components of group dynamics based on previous studies and project notes analysis. Then, we investigated how group dynamics influence team achievements in virtual environments.
The findings from this study suggest that leadership, creative friction, and group cohesion have a positive relationship with team achievements and that these components are closely related to each other in a virtual environment. These results show that 1) group dynamics play an important role in improving project performance, 2) dealing with creative conflict is a way to improve team performance, and 3) leadership plays a key role in a project team. The leader's role goes beyond facilitating to include managing the dynamics of the group with which they are working. The team leaders’ and team members’ roles and responsibilities should be outlined for the team members. The team leader should clearly define and discuss team member roles, responsibilities, and accountabilities with the entire team. Additionally, the team leader should encourage task-related conflict such as creative friction in order to derive meaningful results from the virtual team project. Team members can express opposition and coordinate different opinions. In the process of adjusting and overcoming conflicts, a team can improve its performance. In addition, this study demonstrates the importance of group cohesion as a factor of a successful team project. Research by Reed and Knight [33] showed that a lack of project group cohesion and hidden agendas is a greater risk for virtual projects than for traditional projects. This research also insisted that individuals within an organization work as a team to achieve a common goal. The results of this study support Reed and Knight’s study by demonstrating the importance of group cohesion and leadership through empirical research. It is expected to provide strategies to promote collaboration in the workplace, as well as effective learning through virtual projects. Establishing good group dynamics is a much more complex problem with project teams, but one that must be dealt with if the project team is to be successful.
For the establishment of a collaborative environment, information system should support in-depth discussion and productive collaboration functionally. Thus, group dynamics can be an important research topic in the field of information system as well as strategic leadership. Previous studies have emphasized the importance of group dynamics. However, there were few empirical researches for the components of group dynamics and the actual role of them in a virtual space. Despite the lack of theoretical and empirical support for the connection between group dynamics and team performance, the empirical evidence from this study is expected to provide theoretical and practical implications.
6.2 Limitations and Future Research
This study aims to provide new insights regarding group dynamics and present some new results that improve upon past studies. However, it has some limitations. First is the problem of generalization. Because empirical research was conducted in an e-learning class, the results of the study may be generalized to education, but there may be a limit to application for other areas such as companies or R&D organizations. Second, the results of this study may be affected to some extent by the characteristics of the sample, such as team characteristics and cultural backgrounds. Some research evidence shows that heterogeneous groups outperform homogeneous groups on tasks requiring creativity. Because our empirical research is conducted with a heterogeneous group in terms of gender, grade level, major, and capacity, the results of this study may have explanatory power for heterogeneous groups. Our research was carried out in a collectivistic culture, and collectivistic culture may strengthen leadership and cohesion. Korea has a more collectivistic culture than Western nations. Under a collectivistic culture, being accepted by one’s group and following the rules are important. Therefore, there is strong emphasis on cooperation, compliance with the project principles, and a fellowship within the group. Therefore, in order to generalize the results of this study, further research studies should be conducted more widely regarding other factors such as background of members, organizational culture (e.g., collectivistic vs. individual culture), and group characteristics (e.g., heterogeneous vs. homogeneous groups).
참고문헌
- B. J. Buchele and H. I. Spitz, (Eds.), Group interventions for treatment of psychological trauma, New York: American Group Psychotherapy Association, 2004.
- M. Chemers, An Integrative Theory of Leadership, Mahway, NJ: Lawrence Erlbaum Associates Lawrence, 1997.
- T. Cummings, Organization Development and Change, In J. J. Boonstra (Eds.) Dynamics of Organizational Change and Learning, West Sussex: John Wiley & Sons Inc., 1993.
- D. R. Forsyth, Group dynamics (3rded). Belmont, CA: Wadsworth, 1999.
- S. S. Gryskiewicz, Positive Turbulence: Developing Climates for Creativity, Innovation, and Renewal, San Francisco, CA: Jossey-Bass, 1999.
- J. P. Guilford, The Nature of Human Intelligence, New York: McGraw-Hill, 1967.
- J. Hirshberg, The Creative Priority. New York: Harper Business, 1998.
- I. L. Janis, Victims of Groupthink: A Psychological Study of Foreign Policy Decisions and Fiascoes, Boston: Houghton Mifflin, 1972.
- I. L. Janis, Groupthink - Psychological Studies of Policy Decisions and Fiascoes (2nd ed), Boston: Houghton Mifflin, 1983.
- D.W. Johnson and R. T. Johnson, Positive Interdependence: Key to Effective Cooperation, In R. Hertz-Lazarowitz and N. Miller (Eds.) Interaction in Cooperative Groups: The Theoretical Anatomy of Group Learning, New York, NY: Cambridge University Press, 1995.
- D. A. Leonard, Innovation as a Knowledge Generation and Transfer Process, In A. Singhal and J. W. Dearing (Eds.) Communication of innovations, New Delhi: SAGE, 2006.
- M. A. Lieberman, I. D. Yalom, and M. B. Miles, Encounter Groups: First facts, New York: Basic Books, 1973.
- J. C. Nunnally, Psychometric theory, New York: McGraw Hill, 1978.
- B. T. Waruszynski, Work Team Strategies enhancing Team Development and Organizational Performance: A Foundation Report for Integrated Capability Engineering Teams, TM 2004-225, Defence R&D Canada - Ottawa, Dec. 2004.
- O. Arazy, O. Nov, R. Patterson, and L. Yeo, "Information quality in Wikipedia: The effects of group composition and task conflict," Journal of Management Information Systems, vol. 27, no. 4, 2011, pp. 71-98. https://doi.org/10.2753/MIS0742-1222270403
- B. M. Bass, "From transactional to transformational leadership: Learning to share the vision," Organizational Dynamics, vol. 18, no. 4, 1990, pp. 19-31. https://doi.org/10.1016/0090-2616(90)90061-S
- A. V. Carron, W. N. Widmeyer, and L. R. Brawley, "The development of an instrument to assess cohesion in sport teams: The group environment questionnaire," Journal of Sport Psychology, vol. 7, 1985, pp. 244-266. https://doi.org/10.1123/jsp.7.3.244
- D. M. DeRosa, C. L. Smith, and D. A. Hantula, "The medium matters: Mining the long-promised merit of group interaction in creative idea generation tasks in a metaanalysis of the electronic group brainstorming literature," Computers in Human Behavior, vol. 23, 2007, pp. 1549-1581. https://doi.org/10.1016/j.chb.2005.07.003
- Z. Dornyei and A. Malderez, "Group dynamics and foreign language teaching," System, vol. 25, no. 1, 1997, pp. 65-81. https://doi.org/10.1016/S0346-251X(96)00061-9
- A. C. Edmondson, "The local and variegated nature of learning in organizations: A group-level perspective," Organization Science, vol. 13, no. 2, 2002, pp. 128-146. https://doi.org/10.1287/orsc.13.2.128.530
- J. Ericksen and L. Dyer, "Right from the start: Exploring the effects of early team events on subsequent project team development and performance," Administrative Science Quarterly, vol. 49, 2004, pp. 438-471.
- W. Felps, T. Mitchell, and E. Byington, "How, when, and why bad apples spoil the barrel: Negative group members and dysfunctional groups," Research in Organizational Behavior, vol. 27, no. 6, 2006, pp. 181-230.
- B. A. Fisher, "Decision emergence: Phases in group decision-making," Speech Monographs, vol. 37, no. 1, 1970, pp. 53-66. https://doi.org/10.1080/03637757009375649
- M. Hoegl and K. P. Parboteeah, "Creativity in innovative projects: how teamwork matters," Journal of Engineering and Technology Management, vol. 24, no. 1, 2007, pp. 148-166. https://doi.org/10.1016/j.jengtecman.2007.01.008
- D. E.Hyatt and T. M.Ruddy, "An examination of the relationship between work group characteristics and performance: Once more into the breech," Personnel Psychology, vol. 50, 1997, pp.553-585. https://doi.org/10.1111/j.1744-6570.1997.tb00703.x
- K. A. Jehn, "A multi method examination of the benefits and detriments of intra group conflict," Administrative Science Quarterly, vol. 40, 1995, pp. 256-282. https://doi.org/10.2307/2393638
- A. Jeong, "Sequential analysis of group interaction and critical thinking in online threaded discussions," The American Journal of Distance Education, vol. 17, no. 1, 2003, pp. 25-43. https://doi.org/10.1207/S15389286AJDE1701_3
- C. M. Johnson, "A survey of current research on online communities of practice," The Internet and Higher Education, vol. 4, no. 1, 2001, pp. 45-60. https://doi.org/10.1016/S1096-7516(01)00047-1
- U. Matzat, "Reducing problems of sociability in online communities: Integrating online communication with offline interaction," American Behavioral Scientist, vol. 53, no. 8, 2010, pp. 1170-1193. https://doi.org/10.1177/0002764209356249
- J. E. McGrath, "Time, interaction, and performance (TIP): A theory of groups," Small Group Research, vol. 22, no. 2, 1991, pp. 147-174. https://doi.org/10.1177/1046496491222001
- B. Mullen and C. Cooper, "The relation between group cohesivness and performance: An integration," Psychological Bulletin, vol. 115, no. 2, 1994, pp. 210-227. https://doi.org/10.1037/0033-2909.115.2.210
- P. B. Paulus, "Groups, teams, and creativity: The creative potential of idea-generating groups," Applied Psychology: An International Review, vol. 49, 2000, pp. 237-262. https://doi.org/10.1111/1464-0597.00013
- A. H. Reed and L. V. Knight, "Project risk differences between virtual and co-located teams," Journal of Computer Information Systems, vol. 51, no. 1, 2010, pp. 19-30.
- K. A. Saeed, "Evaluating the value of collaboration systems in collocated teams: A longitudinal analysis," Computers in Human Behavior, vol. 28, no. 2, 2012, pp. 552-560. https://doi.org/10.1016/j.chb.2011.10.027
- S. Taggar, "Individual creativity and group ability to utilize individual creative resource: A multilevel model," Academy of Management Journal, vol. 45, no. 2, 2002, pp. 315-330. https://doi.org/10.2307/3069349
- A. G. Tekleab, N. R. Quigley, and P. E. Tesluk, "A longitudinal study of team conflict, conflict management, cohesion, and team effectiveness," Group & Organization Management, vol. 34, no. 2, 2009, pp. 170-205. https://doi.org/10.1177/1059601108331218
- B. W. Tuckman, "Developmental sequence in small groups," Psychological Bulletin, vol. 63, no. 6, 1965, pp. 284-399.
- J. S. Valacich, A. R. Dennis, and T. Connolly, "Idea generation in computer based groups: A new ending to an old story," Organizational Behavior and Human Decision Processes, vol. 57, no. 3, 1994, pp. 448-467. https://doi.org/10.1006/obhd.1994.1024
- S. S. Webber and L. M. Donahue, "Impact of highly and less job-related diversity on work group cohesion and performance: A meta-analysis," Journal of Management, vol. 27, 2011, pp. 141-162.
- G. W. Yunker and J. G. Hunt, "An empirical comparison of the Michigan Four-Factor and Ohio State LBDQ leadership scales," Organizational Behavior and Human Performance, vol. 17, 1976, pp. 45-65. https://doi.org/10.1016/0030-5073(76)90052-0