Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study on the Shear Behaviour of Post-Installed Anchors for Seismic Retrofit

내진보강용 후설치 앵커의 전단성능에 관한 실험적 연구

  • Received : 2014.07.03
  • Accepted : 2014.09.04
  • Published : 2014.09.30
⟨ Previous Next ⟩

Abstract

Monotonic and cyclic shear tests for bonded anchors and expansion anchors in concrete were conducted in order to investigate the influence of the concrete strength, crack width and loading protocol. Crack is induced artificially through the whole depth of concrete member in which anchors are installed and monitored during tests for cracked concrete. Based on the test result, characteristic strengths corresponding to a 5% probability of nonexceedance with a confidence of 90% and minimum strengths are obtained and compared with reference strengths including characteristic strengths in the technical approval of each anchor and design strength based on domestic design codes. In addition, anchor displacements at the reference strengths are interpolated from load-displacement curves, and appropriate reference strengths is proposed for anchor design that can limit the anchor displacement.

Keywords

Acknowledgement

Supported by : 국토교통부

References

  1. 한국콘크리트학회, 콘크리트용 앵커 설계법 및 예제집, 2010.
  2. 김익현, 최동욱, 천성철, 이득원, 양문희, 국내의 앵커 실험 강도와 설계 강도의 비교, 한국콘크리트학회 전문위원회 연구발표집, p.p.71-95, 2004.
  3. 이광명, 이진용, 정상화, 최슬우, 콘크리트 매입 후설치 앵커의 인장 및 전단시험방법, 한국콘크리트학회 학술발표회 논문집, p.p.97-98, 2009.
  4. 서성연, 부착식 주입형 롯드앵커의 부착강도에 관한 실험적 연구, 한국방재학회 논문집, 12(3), p.p.1-9, 2012. https://doi.org/10.9798/KOSHAM.2012.12.3.001
  5. 김진섭, 권민호, 서현수, 박재훈, 후 설치 앵커 성능평가와 해석모델, 한국방재학회 논문집, 13(2), p.p.89-95, 2013. https://doi.org/10.9798/KOSHAM.2013.13.2.089
  6. 엄찬회, 유승운, 콘크리트용 후설치 세트앵커의 전단파괴거동에 관한 실험적 연구, 대한토목학회 논문집, 34(2), p.p.367-375, 2013. https://doi.org/10.12652/Ksce.2014.34.2.0367
  7. Eligehausen, R. and Vintzeleou, E., Behaviour of metallic anchors under generalized exitations, Proceedings of Ninth World Conference on Earthquake Engineering, p.p. 505-510, Tokyo, 1988.
  8. Rodriguez, M., Lotze, D., Gross, J. H., Zhang, Y. G., Klingner, R. E. and Graves, H. L., Dynamic Behaviour of Tensile Anchors to Concrete, ACI Structural Journal, 98(4), p.p.511-524, 2001.
  9. Kim, S. Y., Yu, C. S. and Yoon, Y. S., Sleeve-Type Expansion Anchor Behavior in Cracked and Uncracked Concrete, Nuclear Engineering and Design, 228(1-3), p.p. 273-281, 2004. https://doi.org/10.1016/j.nucengdes.2003.06.018
  10. Hoehler, M. S., Mahrenholtz, P. and Eligehausen, R., Behavior of Anchors in Concrete at Seismic-Relevant Loading Rates, ACI Structural Journal, 108(2), p.p. 238-247, 2011.
  11. Genesio, G., Eligehausen, R. and Pampanin, S., Application of Post-Installed Anchors for Seismic Retrofit of RC Beam-Column Joints:Design Method, Proceedings of Ninth Pacific Conference on Earthquake Engineering, p.p. 196-203, Auckland, 2011.
  12. Yilmaz, S., Ozen, M. A. and Yardim, Y., Tensile behavior of post-installed chemical anchors embedded to low strength concrete, Construction and Building Materials, 47, p.p.861-866, 2013. https://doi.org/10.1016/j.conbuildmat.2013.05.032
  13. Caliskan, O., Yilmaz, S., Kaplan, H. and Kirac, N., Shear Strength of Epoxy Anchors embedded into Low Strength Concrete, Construction and Building Materials, 38, p.p. 723-730, 2013. https://doi.org/10.1016/j.conbuildmat.2012.09.020
  14. EOTA, ETAG 001 Guideline for european technical approval of metal anchors for use in concrete, European Organisation for Technical Approvals, Brussels, 2012.
  15. ACI Committee 355, Evaluating the performance of post-installed mechanical anchors in concrete (ACI 355.2-00), American Concrete Institute, Farmington Hills, Mi, 2011.
  16. ACI Committee 355, Qualification of post-installed adhesive anchors in concrete (ACI 355.4M-11) and commentary, American Concrete Institute, Farmington Hills, Mi, 2011.
  17. 시설안전공단, 기존 시설물 내진성능 평가 및 향상요령, 2011.
  18. Eligehausen, R., Mattis, L., Wollmershauser, R. and Hoehler, M. S., Testing Anchors in Cracked Concrete, Concrete International, p.p. 66-71, 2004.
  19. Mahrenholtz, P., Experimental Performance and Recommendations for Qualification of Post-Installed Anchors for Seismic Applications, Dissertation, University of Stuttgart, Stuttgart, 2012.
  20. Guillet, T., Behavior of Metal Anchors under Combined Tension and Shear Cycling Loads, ACI Structural Journal, 108(3), p.p. 315-323, 2011.
  21. 국토해양부, 콘크리트구조기준, 2012.
  22. FEMA, Prestandard and commentary for the Seismic Rehabilitation of Buildings, FEMA 356, Washington D.C., 2000.
  23. EOTA, European Technical Approval ETA-11/0493, European Organisation for Technical Approvals, Brussels, 2013.
  24. EOTA, European Technical Approval ETA-98/0001, European Organisation for Technical Approvals, Brussels, 2013.