Effects on Bond Strength between Zirconia and Porcelain according to Etching Treatment and Low Temperature Degradation

지르코니아 표면에칭처리와 저온열화현상이 지르코니아와 전장도재의 결합강도에 미치는 영향

  • Park, Jin-Young (Department of Health Science Specialized in Dental Laboratory Science and Engineering, Graduate School, Korea University) ;
  • Kim, Jae-Hong (Department of Health Science Specialized in Dental Laboratory Science and Engineering, Graduate School, Korea University) ;
  • Kim, Woong-Chul (Department of Health Science Specialized in Dental Laboratory Science and Engineering, Graduate School, Korea University) ;
  • Kim, Ji-Hwan (Department of Health Science Specialized in Dental Laboratory Science and Engineering, Graduate School, Korea University) ;
  • Kim, Hae-Young (Department of Health Science Specialized in Dental Laboratory Science and Engineering, Graduate School, Korea University)
  • 박진영 (고려대학교 일반대학원 보건과학과 치의기공전공) ;
  • 김재홍 (고려대학교 일반대학원 보건과학과 치의기공전공) ;
  • 김웅철 (고려대학교 일반대학원 보건과학과 치의기공전공) ;
  • 김지환 (고려대학교 일반대학원 보건과학과 치의기공전공) ;
  • 김혜영 (고려대학교 일반대학원 보건과학과 치의기공전공)
  • Received : 2014.03.12
  • Accepted : 2014.05.12
  • Published : 2014.06.30

Abstract

The purpose of this study was to investigate the influence of etching surface treatment and aging treatment of zirconia on the shear bond strength between zirconia core and veneered ceramic. Four groups of zirconia-ceramic specimens were prepared; 1) NEZ group (no etching zirconia), 2) EZ group (etching zirconia), 3) ANEZ group (aging and no etching zirconia), 4) AEZ group (aging and etching zirconia). The shear bond strength between zirconia and porcelain was measured using Instron Universal Testing Machine. Surface texture with crystalline structure of zirconia surface was examined by the field emission scanning electron microscopy (FE-SEM) with ingredient analysis. The fractured surfaces of specimens were examined to determine the failure pattern by a digital microscope. The mean${\pm}$standard deviation of shear bond strengths were $23.47{\pm}3.47$ Mpa in NEZ, $28.30{\pm}4.34$ Mpa in EZ, $21.85{\pm}4.65$ Mpa in ANEZ, $24.65{\pm}3.65$ Mpa in AEZ group, respectively, and were significantly different (p<0.05). The average shear bond strength was largest in EZ group, followed by AEZ, NEZ, and ANEZ groups. Most specimens in NEZ group showed adhesive failure and most specimens in EZ, AEZ, and ANEZ group showed mixed failure. Surface of etching treatment group (EZ and AEZ) showed complex micro-structure and irregular surface texture which may facilitate mechanical interlocking, while untreated zirconia surface presented simpler micro-structure. In conclusion, an etching treatment improved bonding strength between zirconia and porcelain by forming mechanical interlocking.

본 연구에서는 지르코니아 에칭에 의한 표면변화가 지르코니아 코어와 도재 사이의 결합강도에 미치는 영향을 조사하기 위해 전단결합강도 실시하였고, 표면의 변화를 관찰하기 위한 SEM 측정, 에칭처리에 따른 지르코니아의 성분변화를 알아보기 위해 EDS 분석을 실시하였다. 그리고 구강상태에서 15~20년의 저온열화현상을 재현하기 위해 저온 열화 처리를 시행하여 전단결합강도 평가를 실시하여 다음과 같은 결과가 도출되었다. 1. 에칭처리를 시행하지 않은 시편과 에칭처리를 시행한 시편의 전단결합강도를 비교할 경우 에칭한 시편의 전단결합강도가 큰 것을 알 수 있다. 이는 에칭용액이 지르코니아코어 표면에 interlocking을 형성하여 기계적인 결합을 높여 주었을 것이라고 생각된다. 2. 전단결합강도의 결과(EZ>AEZ>NEZ>ANEZ)를 보았을 때 통계적으로는 유의한 차이를 보였으며, 저온열화처리를 하지 않고 에칭처리를 한 EZ군이 전단결합강도가 가장 큰 것을 알 수 있었다. 또한 파절 양상에서도 EZ군에서만 응집파절을 보여 가장 결합강도가 높다는 결과를 도출할 수 있다. 결론적으로 저온열화처리 여부에 관계없이 표면에칭처리를 한 시편의 전단결합강도가 큰 것으로 나타나 지르코니아 표면의 에칭처리로 인한 interlocking의 형성이 기계적인 결합을 향상시키는 요인이 되었다고 생각된다.

Keywords

References

  1. Diniz AC, Nascimento RM, Souza J, Henriques B, Carreiro AF: Fracture and shear bond strength analyses of different dental veneering ceramics to zirconia. Mater Sci Eng C Biol Appl 38: 79-84, 2014. https://doi.org/10.1016/j.msec.2014.01.032
  2. Papanagiotou HP, Morgano SM, Giordano RA, Pober R: In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics. J Prosthetic Dent 96: 154-164, 2006. https://doi.org/10.1016/j.prosdent.2006.08.004
  3. Lee TH: Effect of surface treatments of dental zirconia on the low temperature degradation. Doctoral dissertation, Seoul University, Seoul, 2011.
  4. Ban S, Suzuki T, Yoshihara K, Sasaki K, Kawai T, Kono H: Effect of coloring on mechanical properties of dental zirconia. J Medical Biol Eng 34: 24-29, 2014. https://doi.org/10.5405/jmbe.1425
  5. Della Bona A, Kelly JR: The clinical success of all-ceramic restorations. J Am Dent Assoc 139: 8S-13S, 2008.
  6. Sailer I, Feher A, Filser F, Gauckler LJ, Luthy H, Hammerle CHF: Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont 20: 383-388, 2007.
  7. Elsaka SE: Influence of surface treatments on the surface properties of different zirconia cores and adhesion of zirconia-veneering ceramic systems. Dent Mater 29: e239-e251, 2013. https://doi.org/10.1016/j.dental.2013.07.003
  8. Kirmali O, Akin H, Ozdemir AK: Shear bond strength of veneering ceramic to zirconia core after different surface treatments. Photomed Laser Surg 31: 261-268, 2013. https://doi.org/10.1089/pho.2013.3487
  9. Peterson I, Pajares A, Lawn B, Thompson V, Rekow E: Mechanical characterization of dental ceramics by Hertzian contacts. J Dent Res 77: 589-602, 1998. https://doi.org/10.1177/00220345980770041201
  10. Vagkopoulou T, Koutayas SO, Koidis P, Strub JR: Zirconia in dentistry: part 1. Discovering the nature of an upcoming bioceramic. Eur J Esthet Denti 4: 130-151, 2009.
  11. Porter DL, Heuer A: Mechanisms of toughening partially stabilized zirconia (PSZ). J Am Ceram Soc 60: 183-184, 1977. https://doi.org/10.1111/j.1151-2916.1977.tb15509.x
  12. Luthardt R, Holzhüter M, Sandkuhl O, et al.: Reliability and properties of ground Y-TZP-zirconia ceramics. J Dent Res 81: 487-491, 2002. https://doi.org/10.1177/154405910208100711
  13. Cheng H, Tsoi JH, Zwahlen R, Matinlinna J: Effects of silica-coating and a zirconate coupling agent on shear bond strength of flowable resin-zirconia bonding. Int J Adhes Adhes 50: 11-16, 2014. https://doi.org/10.1016/j.ijadhadh.2013.12.025
  14. Moradabadi A, Roudsari SES, Yekta BE, Rahbar N: Effects of surface treatment on bond strength between dental resin agent and zirconia ceramic. Mater Sci Eng C Biol Appl 34: 311-317, 2014. https://doi.org/10.1016/j.msec.2013.09.015
  15. Chaiyabutr Y, McGowan S, Phillips KM, Kois JC, Giordano RA: The effect of hydrofluoric acid surface treatment and bond strength of a zirconia veneering ceramic. J Prosthet Dent 100: 194-202, 2008. https://doi.org/10.1016/S0022-3913(08)60178-X
  16. Guess PC, Kuliš A, Witkowski S, Wolkewitz M, Zhang Y, Strub JR: Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater 24: 1556-1567, 2008. https://doi.org/10.1016/j.dental.2008.03.028
  17. International Organization for Standardization: Dental materials-guidance on testing of adhesion to tooth structure, ISO/TR 11405. International Organization for Standardization, Geneva, Switzerland, 1994.
  18. International Organization for Standardization: Implants for surgery-Ceramic materials based on Yttria-stabilized tetragonal zirconia (Y-TZP), ISO/TR 13356. International Organization for Standardization, Geneva, Switzerland, 2008.
  19. Chevalier J, Gremillard L, Deville S: Low-temperature degradation of zirconia and implications for biomedical implants. Annu Rev Mater Res 37: 1-32, 2007. https://doi.org/10.1146/annurev.matsci.37.052506.084250
  20. Artun J, Bergland S: Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment. Am J Orthod 85: 333-340, 1984. https://doi.org/10.1016/0002-9416(84)90190-8
  21. Sriamporn T, Thamrongananskul N, Busabok C, Poolthong S, UO M, Tagami J: Dental zirconia can be etched by hydrofluoric acid. Dent Mater J 33: 79-85, 2014. https://doi.org/10.4012/dmj.2013-243
  22. Blatz MB, Sadan A, Kern M: Resin-ceramic bonding: a review of the literature. J prosthet dent 89: 268-274, 2003. https://doi.org/10.1067/mpr.2003.50
  23. Saraç YS, Kulunk T, Elekdag-Turk S, Sarac D, Turk T: Effects of surface-conditioning methods on shear bond strength of brackets bonded to different all-ceramic materials. Eur J Orthod 33: 667-672, 2011. https://doi.org/10.1093/ejo/cjq132
  24. Bona AD, Borba M, Benetti P, Cecchetti D: Effect of surface treatments on the bond strength of a zirconia-reinforced ceramic to composite resin. Braz oral Res 21: 10-15, 2007. https://doi.org/10.1590/S1806-83242007000100002
  25. Ozcan M, Alkumru HN, Gemalmaz D: The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int J Prosthodont 14: 335-339, 2001.
  26. Zandparsa R, Talua NA, Finkelman MD, Schaus SE: An in vitro comparison of shear bond strength of zirconia to enamel using different surface treatments. J Prosthodont 23: 117-123, 2013.