Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A novel first-order shear deformation theory for laminated composite plates

  • Sadoune, Mohamed (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department) ;
  • Tounsi, Abdelouahed (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department) ;
  • Houari, Mohammed Sid Ahmed (Advanced Materials and Structures Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department) ;
  • Adda Bedia, El Abbes (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department)
  • Received : 2013.12.06
  • Accepted : 2014.03.23
  • Published : 2014.09.25
⟨ Previous Next ⟩

Abstract

In the present study, a new simple first-order shear deformation theory is presented for laminated composite plates. Moreover, the number of unknowns of this theory is the least one comparing with the traditional first-order and the other higher-order shear deformation theories. Equations of motion and boundary conditions are derived from Hamilton's principle. Analytical solutions of simply supported antisymmetric cross-ply and angle-ply laminates are obtained and the results are compared with the exact three-dimensional (3D) solutions and those predicted by existing theories. It can be concluded that the proposed theory is accurate and simple in solving the static bending and free vibration behaviors of laminated composite plates.

Keywords

References

  1. Bakhti, K., Kaci, A., Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2013), "Large deformation analysis for functionally graded carbon nanotube-reinforced composite plates using an efficient and simple refined theory", Steel Compos. Struct., Int. J., 14(4), 335-347. https://doi.org/10.12989/scs.2013.14.4.335
  2. Benachour, A., Daouadji Tahar, H., Ait Atmane, H., Tounsi, A. and Meftah, S.A. (2011), "A four variable refined plate theory for free vibrations of functionally graded plates with arbitrary gradient", Compos. Part B: Engineering, 42(6), 1386-1394. https://doi.org/10.1016/j.compositesb.2011.05.032
  3. Bodaghi, M. and Saidi, A.R. (2011), "Thermoelastic buckling behavior of thick functionally graded rectangular plates", Arch. Appl. Mech., 81(11), 1555-1572. https://doi.org/10.1007/s00419-010-0501-0
  4. Bouderba, B., Houari, M.S.A. and Tounsi, A. (2013), "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., Int. J., 14(1), 85-104. https://doi.org/10.12989/scs.2013.14.1.085
  5. Fares, M.E., Elmarghany, M.K. and Atta, D. (2009), "An efficient and simple refined theory for bending and vibration of functionally graded plates", Compos. Struct., 91(3), 296-305. https://doi.org/10.1016/j.compstruct.2009.05.008
  6. Hencky, H. (1947), "Uber die Berucksichtigung der Schubverzerrungen in ebenen Platen", Ing. Arch., 16(1), 344-351.
  7. Jones, R.M. (1999), Mechanics of Composite Materials, (2nd Ed.), Taylor & Francis.
  8. Lo, K.H., Christensen, R.M. and Wu, E.M. (1977), "A higher order theory of plate deformation - Part I. Homogeneous plate", J. Appl. Mech., 44(4), 663-668. https://doi.org/10.1115/1.3424154
  9. Levy, M. (1977), "Memoire sur la theorie des plaques elastiques planes", J. Math. Pures et Appl., 3, 219-306.
  10. Matsunaga, H. (2000), "Vibration and stability of cross-ply laminated composite plates according to a global higher-order plate theory", Compos. Struct., 48(4), 231-244. https://doi.org/10.1016/S0263-8223(99)00110-5
  11. Mindlin, R.D. (1951), "Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates", J. Appl. Mech., 18, 31-38.
  12. Moradi, S. and Mansouri, M.H. (2012), "Thermal buckling analysis of shear deformable laminated orthotropic plates by differential quadrature", Steel Compos. Struct., Int. J., 12(2), 129-147. https://doi.org/10.12989/scs.2012.12.2.129
  13. Nelson, R.B. and Lorch, D.R. (1974), "A refined theory of laminated orthotropic plates", J. Appl. Mech., 41(1), 177-183. https://doi.org/10.1115/1.3423219
  14. Noor, A.K. (1973), "Free vibrations of multilayered composite plates", AIAA J., 11(7), 1038-1039. https://doi.org/10.2514/3.6868
  15. Noor, A.K. and Burton, W.S. (1990), "Three-dimensional solutions for antisymmetrically solutions for antisymmetrically laminated anisotropic plates", J. Appl. Mech., 57(1), 182-188. https://doi.org/10.1115/1.2888300
  16. Pagano, N.J. (1970), "Exact solutions for rectangular bidirectional composites and sandwich plates", J. Compos. Mater., 4(1), 20-34.
  17. Ray, M.C. (2003), "Zeroth-order shear deformation theory for laminated composite plates", J. Appl. Mech., 70(3), 374-380. https://doi.org/10.1115/1.1558077
  18. Reddy, J.N. (1984), "A simple higher order theory for laminated composite plates", J. Appl. Mech., 51(4), 745-752. https://doi.org/10.1115/1.3167719
  19. Reddy, J.N. (1997), "Mechanics of laminated composite plate: Theory and analysis", CRC Press, New York.
  20. Reddy, J.N. (2000), "Analysis of functionally graded plates", Int. J. Numer. Method. Eng., 47, 663-684. https://doi.org/10.1002/(SICI)1097-0207(20000110/30)47:1/3<663::AID-NME787>3.0.CO;2-8
  21. Reddy, J.N. (2002), Energy Principles and Variational Methods in Applied Mechanics, John Wiley & Sons Inc.
  22. Reddy, J.N. (2004), Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press.
  23. Reissner, E. (1945), "The effect of transverse shear deformation on the bending of elastic plates," J. Appl. Mech., 12, 69-77.
  24. Swaminathan, K. and Patil, S. (2008), "Analytical solutions using a higher order refined computational model with 12 degrees of freedom for the free vibration analysis of antisymmetric angle-ply plates", Compos. Struct., 82(2), 209-216. https://doi.org/10.1016/j.compstruct.2007.01.001
  25. Xiang, S. and Kang, G.W. (2013), "A nth-order shear deformation theory for the bending analysis on the functionally graded plates", Eur. J. Mech. - A/Solids, 37, 336-343. https://doi.org/10.1016/j.euromechsol.2012.08.005
  26. Xiang, S., Jin, Y.X., Bi, Z.Y., Jiang, S.X. and Yang, M.S. (2011), "A n-order shear deformation theory for free vibration of functionally graded and composite sandwich plates", Compos. Struct., 93(11), 2826-2832. https://doi.org/10.1016/j.compstruct.2011.05.022
  27. Yaghoobi, H. and Torabi, M. (2013a), "Post-buckling and nonlinear free vibration analysis of geometrically imperfect functionally graded beams resting on nonlinear elastic foundation", Appl. Math. Model., 37(18- 19), 8324-8340. https://doi.org/10.1016/j.apm.2013.03.037
  28. Yaghoobi, H. and Torabi, M. (2013b), "An analytical approach to large amplitude vibration and post-buckling of functionally graded beams rest on non-linear elastic foundation", J. Theor. Appl. Mech., 51(1), 39-52.
  29. Yaghoobi, H. and Torabi, M. (2013c), "Exact solution for thermal buckling of functionally graded plates resting on elastic foundations with various boundary conditions", J. Therm. Stresses, 36(9), 869-894. https://doi.org/10.1080/01495739.2013.770356
  30. Yaghoobi, H. and Yaghoobi, P. (2013), "Buckling analysis of sandwich plates with FGM face sheets resting on elastic foundation with various boundary conditions: an analytical approach", Meccanica, 48(8), 2019-2035. https://doi.org/10.1007/s11012-013-9720-0

Cited by

  1. A refined theory with stretching effect for the flexure analysis of laminated composite plates vol.11, pp.5, 2016, https://doi.org/10.12989/gae.2016.11.5.671
  2. Static and dynamic behavior of FGM plate using a new first shear deformation plate theory vol.57, pp.1, 2016, https://doi.org/10.12989/sem.2016.57.1.127
  3. An analytical method for free vibration analysis of functionally graded sandwich beams vol.23, pp.1, 2016, https://doi.org/10.12989/was.2016.23.1.059
  4. Thermal buckling analysis of FG plates resting on elastic foundation based on an efficient and simple trigonometric shear deformation theory vol.18, pp.2, 2015, https://doi.org/10.12989/scs.2015.18.2.443
  5. A new hyperbolic shear deformation plate theory for static analysis of FGM plate based on neutral surface position vol.8, pp.3, 2015, https://doi.org/10.12989/gae.2015.8.3.305
  6. Buckling analysis of isotropic and orthotropic plates using a novel four variable refined plate theory vol.21, pp.6, 2016, https://doi.org/10.12989/scs.2016.21.6.1287
  7. A simple shear deformation theory based on neutral surface position for functionally graded plates resting on Pasternak elastic foundations vol.53, pp.6, 2015, https://doi.org/10.12989/sem.2015.53.6.1215
  8. Free vibration of anti-symmetric angle-ply plates with variable thickness vol.137, 2016, https://doi.org/10.1016/j.compstruct.2015.11.016
  9. On vibration properties of functionally graded nano-plate using a new nonlocal refined four variable model vol.18, pp.4, 2015, https://doi.org/10.12989/scs.2015.18.4.1063
  10. Examination of non-homogeneity and lamination scheme effects on deflections and stresses of laminated composite plates vol.57, pp.4, 2016, https://doi.org/10.12989/sem.2016.57.4.603
  11. Nonlinear dynamic response and vibration of shear deformable imperfect eccentrically stiffened S-FGM circular cylindrical shells surrounded on elastic foundations vol.40, 2015, https://doi.org/10.1016/j.ast.2014.11.005
  12. Ultimate shear strength of composite welded steel-aluminium beam subjected to shear load vol.16, pp.1, 2016, https://doi.org/10.1007/s13296-016-3004-1
  13. Dynamic behavior of FGM beam using a new first shear deformation theory vol.10, pp.2, 2016, https://doi.org/10.12989/eas.2016.10.2.451
  14. Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories vol.53, pp.6, 2015, https://doi.org/10.12989/sem.2015.53.6.1143
  15. Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory vol.57, pp.4, 2016, https://doi.org/10.12989/sem.2016.57.4.617
  16. Thermomechanical effects on the bending of antisymmetric cross-ply composite plates using a four variable sinusoidal theory vol.19, pp.1, 2015, https://doi.org/10.12989/scs.2015.19.1.093
  17. An efficient shear deformation theory for wave propagation of functionally graded material plates vol.57, pp.5, 2016, https://doi.org/10.12989/sem.2016.57.5.837
  18. Effect of porosity on vibrational characteristics of non-homogeneous plates using hyperbolic shear deformation theory vol.22, pp.4, 2016, https://doi.org/10.12989/was.2016.22.4.429
  19. An original single variable shear deformation theory for buckling analysis of thick isotropic plates vol.63, pp.4, 2017, https://doi.org/10.12989/sem.2017.63.4.439
  20. Free vibration of symmetrically laminated quasi-isotropic super-elliptical thin plates vol.29, pp.4, 2014, https://doi.org/10.12989/scs.2018.29.4.493
  21. Static analysis of laminated reinforced composite plates using a simple first-order shear deformation theory vol.24, pp.4, 2019, https://doi.org/10.12989/cac.2019.24.4.369