Structural Engineering and Mechanics

  • 제51권6호
  • /
  • Pages.1047-1065
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Structural damping of composite materials using combined FE and lamb wave method

  • Ben, B.S. (Department of Mechanical Engineering, National Institute of Technology) ;
  • Ben, B.A. (Department of Mechanical Engineering (AUCE), Andhra University) ;
  • Kweon, S.H. (School of Mechanical Engineering, Kyungpook National University) ;
  • Yang, S.H. (School of Mechanical Engineering, Kyungpook National University)
  • 투고 : 2012.08.20
  • 심사 : 2014.07.20
  • 발행 : 2014.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The article presents the methodology for finding material damping capacity at higher frequency and at relatively lower amplitudes. The Lamb wave dispersion theory and loss less finite element model is used to find the damping capacity of composite materials. The research has been focused on high frequency applications materials. The method was implemented on carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) plates. The Lamb waves were generated using ultrasonic pulse generator setup. The hybrid method has been explored in this article and the results have been compared with bandwidth methods available in the literature.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea(NRF)

참고문헌

  1. Birt, E.A. (1998), "Damage detection in carbon-fibre composites using ultrasonic lamb waves", Non-Destructive Test. Condition. Monit., 40, 335-339.
  2. Blake, R.E. (2010), Basic Vibration Theory, Piersol A.G., Paez T.L. Harris' Shock and Vibration Handbook, 6th Edition, Mc-Graw Hill, New York.
  3. Botelho, E.C., Pardini, L.C. and Rezende, M.C. (2006), "Damping behavior of continuous fiber/metal composite materials by the free vibration method", Compos. Part B, 37, 255-264.
  4. Chen, Y. and Gibson R.F. (2003), "Analytical and experimental studies of composite isogrid structures with integral passive damping", Mech. Adv. Mater. Struct., 10(2), 127-143. https://doi.org/10.1080/15376490306734
  5. Dalton, R.P., Cawley, P. and Lowe, M.J.S. (2001), "The potential of guided waves for monitoring large areas of metallic aircraft fuselage structure", J. Nondestr. Eval., 20, 29-46. https://doi.org/10.1023/A:1010601829968
  6. Daniel, I.M. and Ishai, O. (1994), Engineering Mechanics of Composite Materials, Oxford U.P, New York.
  7. Gibson, R.F. (1992), Nontraditional Applications of Damping Measurements, STP 1169 Mechanics and Mechanisms of Material Damping, Kinra, V.K., Wolfenden, A., Philadelphia.
  8. Gremaud, G., Kustov, S.L. and Bremnes, O. (2001), "Ultrasonics techniques: PUCOT and ACT", Mater. Sci. Forum., 652, 366-368.
  9. Guan, H. and Gibson, R.F. (2001), "Micromechanical models for damping in woven fabric-reinforced polymer matrix composites", J. Compos. Mater., 35(16), 1417-1434. https://doi.org/10.1106/NEJY-H235-66RD-G635
  10. Harmouche, M.R. and Wolfenden, A.J. (1985), Test. Eval., 13, 424-428. https://doi.org/10.1520/JTE10976J
  11. Krautkramer, J. and Krautkramer, H. (1983), Ultrasonic Testing of Materials, Berlin, Heidelberg, NewYork.
  12. Kwon, Y.W. (1989), "Finite element analysis of crack closure in plate bending", Comput. Struct., 32, 1439-1445. https://doi.org/10.1016/0045-7949(89)90320-9
  13. Marx, J. (1951), Rev. Sci. Instrum., 22, 503-509. https://doi.org/10.1063/1.1745981
  14. McIntire, P. (1991), Nondestructive Testing Handbook, American Society for Nondestructive Testing, 7, 398-402.
  15. Michael, W.H. (1998), Stress Analysis of Fiber-Reinforced Composite Materials, WCB McGraw-Hill.
  16. Mu, B., Wu, H.C., Yan, A., Warnemuende, K., Fu, G., Gibson, R.F. and Kim, D.W. (2006), "FEA of complex bridge system with FRP composite deck", J. Compos. Construct., 10(1), 79-86. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:1(79)
  17. Nowick, A.S. and Berry B.S. (1972), Anelastic Relaxation in Crystalline Solids, Academic Press, New York.
  18. Owen, D.R.J. and Li, Z.H. (1987), "A refined analysis of laminated plates by finite element displacement method - I fundamental and static analysis", Comput. Struct., 26, 907-914. https://doi.org/10.1016/0045-7949(87)90107-6
  19. Prosser, W.H. (1991), "The propagation characteristics of the plate modes of acoustic emission waves in thin aluminum plates and thin graphite/epoxy composite plates and tubes", NASA Technical Memorandum 104187.
  20. Ratnam, C., Ben, B.S. and Ben, B.A. (2009), "Structural damage detection using combined finite element and model lamb wave propagation parameters", IMECHE Part C: J. Mech. Eng. Sci., 223, 769-777. https://doi.org/10.1243/09544062JMES1124
  21. Summerscales, J. (1987), Non-Destructive Testing of Fiber-Reinforced Plastics Composites, Elsevier Applied Science, London and New York.

피인용 문헌

  1. Damping Model of Fiber Reinforced Composites and Factors Affecting Damping and Dynamic Response vol.28, pp.5, 2014, https://doi.org/10.1007/s10443-021-09924-9