Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

New damage localization indicator based on curvature for single-span beams

  • Wang, Yi-lin (School of Civil Engineering, Shandong Jianzhu University)
  • Received : 2012.08.08
  • Accepted : 2014.07.20
  • Published : 2014.09.25
⟨ Previous Next ⟩

Abstract

Most existing damage detection methods based on curvature should investigate the indicator value changes between the intact and damaged state. However, the 'footprint' in the intact state is usually not available for most actual beams. Therefore, a new damage localization indicator called Difference of Nearby Difference Curvature Indicator (DNDCI) was introduced for single-span beams. This indicator does not require prior information of the intact beam and is sensitive to the damage occurs on or nearby the measuring points. Practical and detailed application method of DNDCI has been proposed. Besides the idealized simply supported beams, it was validated by example that DNDCI is also applicable to the actual single-span beams supported by bearings.

Keywords

References

  1. Buezas,F.S., Rosales, M.B. and Filipich, C.P. (2011), "Damage detection with genetic algorithms taking into account a crack contact model", Eng. Fracture Mech., 78, 695-712. https://doi.org/10.1016/j.engfracmech.2010.11.008
  2. Chandrashekhar M. and Ganguli, R. (2009), "Damage assessment of structures with uncertainty by using mode-shape curvatures and fuzzy logic", J.Sound. Vibra., 326(3-5), 939-957. https://doi.org/10.1016/j.jsv.2009.05.030
  3. Domaneschi, M., Limongelli, M.P. and Martinelli, L. (2013). "Vibration based Damage localization using MEMS on a suspension bridge model", Smart Struct. Sys., 12(6), 679-694. https://doi.org/10.12989/sss.2013.12.6.679
  4. Dutta, A. and Talukdar, S. (2004), "Damage detection in bridges using accurate modal parameters", Finite Elem. Anal. Des., 40(3), 287-304. https://doi.org/10.1016/S0168-874X(02)00227-5
  5. Hamey, C.S., Lestari, W. and Qiao, P.Z. et al. (2004), "Experimental damage identification of carbon/epoxy composite beams using curvature mode shapes", Struct. Health Monit., 3(4), 333-353. https://doi.org/10.1177/1475921704047502
  6. Homaei, F., Shojaee, S. and Ghodrati Amiri, G. (2014). "A direct Damage detection method using Multiple Damage Localization Index Based on Mode Shapes criterion", Struct. Eng. Mech., 49(2), 183-202. https://doi.org/10.12989/sem.2014.49.2.183
  7. Jorg, F. U., Anne, T. and Guido, D.R. (2005), "Damage detection of a prestressed concrete beam using modal strains", J.Struct. Eng., 131(9), 1456-1463. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:9(1456)
  8. Liu, H., Xin, K.G., and Qi, Q.Q. (2011), "Study of Structural Damage Detection with Multi-objective Function Genetic Algorithms", Procedia Eng., 12, 80-86. https://doi.org/10.1016/j.proeng.2011.05.014
  9. Pandey, A.K., Biswas, M. and Samman, M.M. (1991), "Damage detection from changes in curvature mode shapes", J.Sound. Vibra., 145(2), 312-332.
  10. Ratcliffe, C.P. and Bagaria, W.J. (1998), "Vibration technique for locating delamination in a composite beam", AIAA J., 36 (6), 1074-1077. https://doi.org/10.2514/2.482
  11. Reynders, E., Roeck G.D. and Bakir P.G., et al. (2007), "Damage identification on the Tilff bridge by vibration monitoring using optical fiber strain sensors", J.Eng.Mech., 133(2), 185-193. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:2(185)
  12. Sahin,M. and Shenoi, R.A. (2003), "Quantification and localization of damage in beam-like structures by using artificial neural networks with experimental validation" Eng. Struct., 25(14), 1785-1802. https://doi.org/10.1016/j.engstruct.2003.08.001
  13. Tomaszewska, A. (2010), "Influence of statistical errors on damage detection based on structural flexibility and mode shape curvature", Comput. Struct., 88(3-4), 154-164. https://doi.org/10.1016/j.compstruc.2009.08.017
  14. Wahab, M.M.A. and Roeck, G.D. (1999), "Damage detection in bridges using modal curvatures: application to a real damage scenario", J.Sound. Vibra., 226(2), 217-235. https://doi.org/10.1006/jsvi.1999.2295
  15. Wu, D. and Law, S.S. (2004), "Damage localization in plate structures from uniform load surface curvature", J.Sound. Vibra., 276(1-2), 227-244. https://doi.org/10.1016/j.jsv.2003.07.040
  16. Wu, N. and Wang, Q. (2011), "Experimental studies on damage detection of beam structures with wavelet transform", Inter. J. Eng. Sci., 49, 253-261. https://doi.org/10.1016/j.ijengsci.2010.12.004
  17. Xu D.Y., Cheng X., and Huang S.F. et al. (2010), "Identifying technology for structural damage based on the impedance analysis of piezoelectric sensor", Constr. Build. Mater., 24, 2522-2527. https://doi.org/10.1016/j.conbuildmat.2010.06.004

Cited by

  1. Damage localization and quantification of composite stratified beam Structures using residual force method vol.842, 2017, https://doi.org/10.1088/1742-6596/842/1/012028