Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of the Influence of Blast Vibration on Machine Tool Accuracy

발파진동으로 인한 공작기계 가공정도의 영향 평가

  • Lee, JinKab (Division of Mechanical Automation, Gyeonggi College of Science and Technology)
  • Received : 2014.07.11
  • Accepted : 2014.08.07
  • Published : 2014.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

The machine tool is used widely to manufacture and trial manufactured goods in many machinery industries. Blast-induced ground vibration may have an environmental impact, such as damage to the adjacent structures and facilities. This study examined the influence of blast vibration on the accuracy of machine tools. The blast vibration and vibration of machine tools was measured to evaluate the influence of blast vibration on machine tools. Based on the evaluation of the vibration limit of machine tools, the vibration criteria for machine tools in this study were SLIGHTLY ROUGH~ROUGH. By repeated blast vibration, machine tools are more likely show reduced accuracy.

공작기계는 기계산업의 생산 및 시제품가공 등에 널리 적용되고 있다. 폭발시 발생하는 지반진동은 인근 구조물의 손상이나 시설에 많은 영향을 미친다. 본 논문은 발파진동이 공작기계의 가공정밀도에 미치는 영향을 고찰하였다. 발파진동과 발파시 공작기계의 진동을 측정하였고, 진동허용치를 기준으로 평가하였다. 공작기계의 진동허용치를 기준으로 할 경우 본 연구에 사용된 공작기계의 발파시 진동허용치는 SLIGHTLY ROUGH~ROUGH에 해당된다. 발파진동이 반복될 경우 정밀도가 저하될 가능성이 많다.

Keywords

References

  1. Ah-Ram Won, et. al., "A Study on the Relationship between Blast Vibration velocity and Vibration Level", Explosive and Blasting, Vol. 30, no.1, pp. 60-70, 2012
  2. Joon-Kee Doo, Chang-Ha Ryu, "A Review on the Problems of korean Blast Damage Criterion", Explosive and Blasting, Vol. 22, No. 3, pp. 85-95, 2004
  3. Choon Sunwoo, Chang-Ha Ryu, "Suggestions for Blast Vibration monitoring", Explosive and Blasting Vol. 18, No. 4, pp. 7-17, 2000
  4. IRD Mechanalysis, INC, "General Machinery Vibration Severity Chart", International Research and Development Corporation, 2009
  5. Ik-Soo Kang et. al., "Evaluation of Vibration Characteristics and machinability of High Speed machining Center", Journal of the Korean Society of Machine Tool Engineers., Spring Conference, pp. 424-429, 2004
  6. Kumaraswamy, et. al., "Standardization of Absolute Vibration Level and Damage Factors for Machinery Health Monitoring", Proceedings of VETOMAC-2, pp. 16-18, December, 2002