참고문헌
- Traini T, Mangano C, Sammons RL, Mangano F, Macchi A, Piattelli A. Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants. Dent Mater 2008;24:1525-33. https://doi.org/10.1016/j.dental.2008.03.029
- Hull CW. Apparatus for production of three-dimensional objects by stereolithography. US Patent US4575330 A; 1984.
- Feygin M, Shkolnik A, Diamond MN, Dvorskiy E. Laminated object manufacturing system. Torrance, CA; Helisys, Inc.; 1998.
- Deckard CR. Part generation by layerwise selective sintering. Thesis (M.S. in Engin.), University of Texas at Austin; Austin, TX; USA; 1986.
- Feygin M. Apparatus and method for forming an integral object from laminations. US Patent EP0272305 B1; 1988.
- Olakanmi EO. Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties. J Mater Process Technol 2013;213:1387-405. https://doi.org/10.1016/j.jmatprotec.2013.03.009
- van Noort R. The future of dental devices is digital. Dent Mater 2012;28:3-12. https://doi.org/10.1016/j.dental.2011.10.014
- Khaing MW, Fuh JYH, Lu L. Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts. J Mater Process Technol 2001;113:269-72. https://doi.org/10.1016/S0924-0136(01)00584-2
- Bremen S, Meiners W, Diatlov A. Selective Laser Melting. Laser Tech J 2012;9:33-8.
- Wataha JC. Predicting clinical biological responses to dental materials. Dent Mater 2012;28:23-40. https://doi.org/10.1016/j.dental.2011.08.595
- Friebel M, Pernell O, Cappius HJ, Helfmann J, Meinke MC. Simulation of color perception of layered dental composites using optical properties to evaluate the benefit of esthetic layer preparation technique. Dent Mater 2012;28:424-32. https://doi.org/10.1016/j.dental.2011.11.017
- Ucar Y, Brantley WA, Johnston WM, Dasgupta T. Mechanical properties, fracture surface characterization, and microstructural analysis of six noble dental casting alloys. J Prosthet Dent 2011;105:394-402. https://doi.org/10.1016/S0022-3913(11)60081-4
- Manaranche C, Hornberger H. A proposal for the classification of dental alloys according to their resistance to corrosion. Dent Mater 2007;23:1428-37. https://doi.org/10.1016/j.dental.2006.11.030
- Sturdevant JR, Sturdevant CM, Taylor DF, Bayne SC. The 8-year clinical performance of 15 low-gold casting alloys. Dent Mater 1987;3:347-52. https://doi.org/10.1016/S0109-5641(87)80073-8
- de Melo RM, Travassos AC, Neisser MP. Shear bond strengths of a ceramic system to alternative metal alloys. J Prosthet Dent 2005;93:64-9. https://doi.org/10.1016/j.prosdent.2004.10.017
- Salazar M SM, Pereira SM, Ccahuana V VZ, Passos SP, Vanderlei AD, Pavanelli CA, Bottino MA. Shear bond strength between metal alloy and a ceramic system, submitted to different thermocycling immersion times. Acta Odontol Latinoam 2007;20:97-102.
- Watanabe K, Miyakawa O, Takada Y, Okuno O, Okabe T. Casting behavior of titanium alloys in a centrifugal casting machine. Biomater 2003;24:1737-43. https://doi.org/10.1016/S0142-9612(02)00583-5
- Childs THC, Hauser C, Badrossamay M. Selective laser sintering (melting) of stainless and tool steel powders: Experiments and modelling. Proc Inst Mech Eng Part B 2005;219:339-57. https://doi.org/10.1243/095440505X8109
- Gu D, Shen Y. Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods. Mater Des 2009;30:2903-10. https://doi.org/10.1016/j.matdes.2009.01.013
- Gusarov AV, Laoui T, Froyen L, Titov VI. Contact thermal conductivity of a powder bed in selective laser sintering. Int J Heat Mass Transf 2003;46:1103-9. https://doi.org/10.1016/S0017-9310(02)00370-8
- Gu D, Shen Y. Effects of dispersion technique and component ratio on densification and microstructure of multi-component Cu-based metal powder in direct laser sintering. J Mater Process Technol 2007;182:564-73. https://doi.org/10.1016/j.jmatprotec.2006.09.026
- Li R, Liu J, Shi Y, Wang L Jiang W. Balling behavior of stainless steel and nickel powder during selective laser melting process. Int J Adv Manuf Technol 2012;59:1025-35. https://doi.org/10.1007/s00170-011-3566-1
-
Basile N, Gonon M, Petit F, Cambier F. Interaction between laser beam and
$BaTiO_3$ powders in selective laser sintering treatments. J Eur Ceram Soc 2012;32:3303-11. https://doi.org/10.1016/j.jeurceramsoc.2012.04.033 - Su X, Yang Y. Research on track overlapping during selective laser melting of powders. J Mater Process Technol 2012;212: 2074-9. https://doi.org/10.1016/j.jmatprotec.2012.05.012
- Akova T, Ucar Y, Tukay A, Balkaya MC, Brantley WA. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dent Mater 2008;24: 1400-4. https://doi.org/10.1016/j.dental.2008.03.001
- Xiang N, Xin XZ, Chen J, Wei B. Metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting. J Dent 2012;40:453-7. https://doi.org/10.1016/j.jdent.2012.02.006
- Reyes MJ, Oshida Y, Andres CJ, Barco T, Hovijitra S, Brown D. Titanium-porcelain system. Part III: effects of surface modification on bond strengths. Biomed Mater Eng 2001; 11:117-36.
- ISO 9693. Metal-ceramic dental restorative systems. 2nd ed. Geneva, Switzerland; International Organization for Standardization; 1999.
- Kontonasaki E, Kantiranis N, Papadopoulou L, Chatzistavrou X, Kavouras P, Zorba T, Sivropoulou A, Chrissafis K, Paraskevopoulos KM, Koidis PT. Microstructural characterization and comparative evaluation of physical, mechanical and biological properties of three ceramics for metal-ceramic restorations. Dent Mater 2008;24: 1362-73. https://doi.org/10.1016/j.dental.2008.03.002
- Uusalo EK, Lassila VP, Yli-Urpo AU. Bonding of dental porcelain to ceramic-metal alloys. J Prosthet Dent 1987;57:26-9. https://doi.org/10.1016/0022-3913(87)90111-9
- Zinelis S, Tsetsekou A, Papadopoulos T. Thermal expansion and microstructural analysis of experimental metal-ceramic titanium alloys. J Prosthet Dent 2003;90:332-8. https://doi.org/10.1016/S0022-3913(03)00493-1
- Gu D, Shen Y. Balling phenomena during direct laser sintering of multi-component Cu-based metal powder. J Alloys Compd 2007;432:163-6. https://doi.org/10.1016/j.jallcom.2006.06.011
- Korkmaz T, Asar V. Comparative evaluation of bond strength of various metal-ceramic restorations. Mater Des 2009;30:445-51. https://doi.org/10.1016/j.matdes.2008.06.002
- Nieva N, Arreguez C, Carrizo RN, Mole CS, Lagarrigue GM. Bonding Strength Evaluation on metal/ceramic interfaces in dental materials. Proc Mater Sci 2012;1:475-82. https://doi.org/10.1016/j.mspro.2012.06.064
- Esquivel-Upshaw JF, Anusavice KJ, Young H, Jones J, Gibbs C. Clinical performance of a lithia disilicate-based core ceramic for three-unit posterior FPDs. Int J Prosthodont 2004; 17:469-75.
- Fischer J, Stawarczyk B, Trottmann A, Hammerle CHF. Festigkeit lasergesinterter Bruckengeruste aus einer CoCr- Legierung. Quintessenz Zahntech 2008;34:140-9.
피인용 문헌
- evaluation of the bond strength between various ceramics and cobalt-chromium alloy fabricated by selective laser sintering vol.7, pp.4, 2015, https://doi.org/10.4047/jap.2015.7.4.312
- The effect of 4,4'-bis(N,N-diethylamino) benzophenone on the degree of conversion in liquid photopolymer for dental 3D printing vol.7, pp.5, 2015, https://doi.org/10.4047/jap.2015.7.5.386
- Bonding of Dental Ceramics to Titanium: Processing and Conditioning Aspects vol.3, pp.3, 2016, https://doi.org/10.1007/s40496-016-0107-x
- Retention strength between veneering resin composites and laser-sintered cobalt–chromium alloy vol.105, pp.1, 2017, https://doi.org/10.1007/s10266-016-0257-2
- Comparison of the bond strength of ceramics to Co-Cr alloys made by casting and selective laser melting vol.9, pp.1, 2017, https://doi.org/10.4047/jap.2017.9.1.52
- Laser Sintering Technology and Balling Phenomenon pp.1557-8550, 2018, https://doi.org/10.1089/pho.2017.4311
- Metal-ceramic bond strength between a feldspathic porcelain and a Co-Cr alloy fabricated with Direct Metal Laser Sintering technique vol.10, pp.1, 2018, https://doi.org/10.4047/jap.2018.10.1.25
- Effect of Stress Relieving Heat Treatment on the Microstructure and High-Temperature Compressive Deformation Behavior of Ti-6Al-4V Alloy Manufactured by Selective Laser Melting vol.49, pp.11, 2018, https://doi.org/10.1007/s11661-018-4864-0
- Comparative Analysis of Mechanical Properties and Metal-Ceramic Bond Strength of Co-Cr Dental Alloy Fabricated by Different Manufacturing Processes vol.11, pp.10, 2018, https://doi.org/10.3390/ma11101801
- A study on the machining accuracy of dental digital method focusing on dental inlay vol.10, pp.4, 2018, https://doi.org/10.4047/jap.2018.10.4.321
- Improvement in the high-temperature creep properties via heat treatment of Ti-6Al-4V alloy manufactured by selective laser melting vol.715, pp.None, 2018, https://doi.org/10.1016/j.msea.2017.12.085
- The effects of universal adhesive and innovative fabrication techniques of metal-ceramic restorations on repair strength of porcelain fracture with metal exposure vol.33, pp.10, 2014, https://doi.org/10.1080/01694243.2019.1577595
- Comparison of bond strength and fracture toughness of metal-ceramic restorations fabricated by conventional lost-wax technique and selective laser sintering vol.7, pp.2, 2019, https://doi.org/10.4103/injo.injo_26_19
- 치과 CAD/CAM 시스템 보유 현황 및 사용 만족도 조사 연구 vol.42, pp.1, 2020, https://doi.org/10.14347/kadt.2020.42.1.45
- Evaluation of marginal discrepancy in metal frameworks fabricated by sintering-based computer-aided manufacturing methods vol.12, pp.3, 2014, https://doi.org/10.4047/jap.2020.12.3.124
- 선택적 레이저 용융 그리고 전통적인 주조 기술에 의해 제조된 Co-Cr 합금에 대한 전장용 세라믹의 전단 결합 강도 비교 vol.21, pp.12, 2014, https://doi.org/10.5762/kais.2020.21.12.434
- Metal Material, Properties and Design Methods of Porous Biomedical Scaffolds for Additive Manufacturing: A Review vol.9, pp.None, 2014, https://doi.org/10.3389/fbioe.2021.641130
- 치과용 재료의 적층가공에 대한 문헌고찰 vol.37, pp.1, 2014, https://doi.org/10.14368/jdras.2021.37.1.1
- Dental Co-Cr alloys fabricated by selective laser melting: A review article vol.59, pp.2, 2014, https://doi.org/10.4047/jkap.2021.59.2.248
- Pre-oxidation of selective-laser-melted titanium dental alloy: effects on surface characteristics and porcelain bonding vol.35, pp.19, 2014, https://doi.org/10.1080/01694243.2021.1877003
- A review on current additive manufacturing technologies and materials used for fabrication of metal-ceramic fixed dental prosthesis vol.35, pp.23, 2021, https://doi.org/10.1080/01694243.2021.1899699