Characterization of laser welding for biodegradable acetate polymer for glass rims

안경테제조를 위한 친환경 아세테이트 수지의 레이저 접합특성에 관한 연구

  • 윤성철 (계명대학교 대학원 기계공학과) ;
  • 박승규 (계명대학교 대학원 기계공학과) ;
  • 박중언 (주식회사 반도옵티컬연구소) ;
  • 최해운 (계명대학교 공과대학 기계자동차공학부)
  • Received : 2014.12.15
  • Accepted : 2014.12.24
  • Published : 2014.12.31

Abstract

Laser beam was applied on the boundary of the polyurethane and biodegradable polyacetate polymers. The distributed laser passed through the polyurethane layer and heated the polyacetate layer, then the soften acetate was squeezed thorough the 1mm square slots of polyurethane for the mechanical joining. The surface roughness ranging between $0.28{\mu}m$ and $3.06{\mu}m$ had almost no effect on joining strength, but the optical properties of HD (High Definition) and UHD (Ultra High Definition) mode affected laser beam transmittance. The optimum laser power was found to be between 8watt and 10watt with 500mm/min of scanning speed. The joining boundary was characterized by optical and SEM analysis. Based on the experiment and characterization results, the laser energy was effective for the polymer joining and efficiency of joining.

Keywords